ISROMAC 1988 A State-of-the-Art Survey in Rotordynamics-Nonlinear and Self-Excited Vibration Phenomena F. F. Ehrich 3
ISROMAC 1988 Topics in Rotor Dynamics J. W. Lund 27
ISROMAC 1988 Vibration of High Speed Disk Rotors W. Seemann and J. Wauer 35
ISROMAC 1988 Rotor Modeling Considerations with Shaft Diameter Changes R. W. Stephenson and K. E. Rouch 51
ISROMAC 1988 Vibration Reduction and Isolation of Rotor-Bearings-Foundation System G. Meng and z. -Q. Xue 61
ISROMAC 1988 Development of an Advanced Hybrid Rotordynamics Model for Vibration Analysis of the Entire Structure of Marine Gas Turbine Engines B. D. Thompson and R. H. Badgley 71
ISROMAC 1988 The Elimination of Shaft Critical Speeds Using Parallel Hydrostatic and Squeeze Film Bearings M. J. Goodwin, M. P. Roach, and J. E. T. Penny 85
ISROMAC 1988 Incorporating General Race and Housing Flexibility and Deadband in Rolling Element Bearing Analysis R. R. Davis and C. S. Vallance 101
ISROMAC 1988 A Unified Mathematical Model for the Dynamics of Flexible Rotor-Journal Bearing Systems V. H. Mucino, J. Cheng, and N. T. Sivaneri 115
ISROMAC 1988 A Three-Dimensional Finite-Difference Method for Calculating the Dynamic Coefficients of Seals R. Nordmann and F. J. Dietzen 133
ISROMAC 1988 Gyroscopic and Damping Effects on the Stability of a Noncontacting Flexibly-Mounted Rotor Mechanical Face Seal I. Green 153
ISROMAC 1988 Rotordynamic Coefficients for Labyrinth Seals Calculated by Means of a Finite Difference Technique R. Nordmann and P. Weiser 175
ISROMAC 1988 Finite Difference Analysis of Rotordynamic Seal Coefficients for an Eccentric Shaft Position R. Nordmann and F. J. Dietzen 193
ISROMAC 1988 Numerical Simulation of Cracked Rotor's Vibrations Due to Measured Crack Shapes B. K. Schmalhorst 211
ISROMAC 1988 Crack Detection in Turbine Rotors A. D. Dimarogonas and C. A. Papadopoulos 227
ISROMAC 1988 Vibro-Impacts in a Geared Rotating System R. Singh, H. Xie, and R. J. Comparin 241
ISROMAC 1988 The Concept of an Impact Resonance Diagram for Characterizing the Nonlinear Response of Impact Vibration T. O. Dalrymple 257
ISROMAC 1988 Multimode Whirl and Whip in Rotor Bearing Systems A. Muszynska 269
ISROMAC 1988 An Analysis of the Stability of Rotor System Supported by the Tilting Pad Bearing under Aerodynamic Excitation F. -S. Wang, C. -So Chang, and H. -S. Gong 287
ISROMAC 1988 Rapid Stability Analysis of Parameter-Excited Large Systems B. Weyh 303
ISROMAC 1988 Aerodynamic Instability Mechanisms for Centrifugal Compressors R. G. Kirk 315
ISROMAC 1988 Instability of Semi-Flexible Rotor with Four-Wedge Bearings R.-M. Zhou 327
ISROMAC 1988 Enhanced Rotor Modeling Tailored for Dynamic Stability Analysis and Nonlinear Simulation R. R. Davis 339
ISROMAC 1988 Influence of Different Types of Seals on the Stability Behavior of Turbopumps W Diewald and R. Nordmann 351
ISROMAC 1988 Digital Control of Rotor Vibrations Z. Gosiewski 365
ISROMAC 1988 An Active Magnetic Damper for Rotor Vibration Control H. M. Chen 381
ISROMAC 1988 Turbo Machinery Design through Symbolic Processing A. A. Grandhee and R. A. Moczadlo 393
ISROMAC 1988 Machine System Configuration Design for Dynamic Response Z. A. Parszewski, J. M. Krodkiewski, and K. Krynicki 409
ISROMAC 1988 Gerotors-Design, Simulation, and Contact Analysis C.-B Tsay 419
ISROMAC 1988 Simulation of Unsteady Behavior of Gas Turbines T. Schobeiri 435
ISROMAC 1988 An Analytical Investigation on Multiple Solutions of Duffing Equation J.-K. Xu 451
ISROMAC 1988 Lateral Vibrations of Rotating Cantilever Beams Using Beam Characteristic Polynomials in Reissner Method A. Kaushal and R. B. Bhat 465
ISROMAC 1988 About Dynamics of a Planetary Variator as a Nonholonomic System M. Z. Zlokolica and L. Cveticanin 481
ISROMAC 1988 Vibration Analysis of Reactor Recirculation Pumps P. E. Allaire, L. C. Martinez, L. E. Barrett, D. M. Bosi, and R. D. Flack 491
ISROMAC 1988 An Approach to Improve Least Squares Method for Calculating Balancing Correction Masses by Using Successive Iteration H. Gu, H. Ren, and J. Yang 513
ISROMAC 1988 A Calculating Method for Nonlinear Torsional Vibration of Diesel Engine Shafting with Applications M. -H. Zhu and B. Hou 523
ISROMAC 1988 Torsional Vibration Response of a Multicylinder Diesel-Alternator Set M. Ghosh and A. Rajamani 537
ISROMAC 1990 Rotordynamic Software S. H. Crandall 3
ISROMAC 1990 Flexural Vibrations of Rotors Immersed in Dense Fluids: Part I-Theory F. Axisa and J. Antunes 23
ISROMAC 1990 Flexural Vibrations of Rotors Immersed in Dense Fluids: Part II- Experiments J. Antunes, F. Axisa, and F. Hareux 39
ISROMAC 1990 Blade Loss Dynamics of a Magnetically Supported Rotor F. Viggiano and G. Schweitzer 53
ISROMAC 1990 Nonlinear Mechanism of Bistable Response of a Flexible Rotor Supported in Squeeze Film Dampers G. Meng 69
ISROMAC 1990 The Influence of the Rotational Speed on the Transverse Vibrations of Rotating Discs W Seemann 79
ISROMAC 1990 Effects of Changing Structure Factors on Torsional Performance of Shaft Systems J. H. Yang and Q. J. Meng 95
ISROMAC 1990 Laboratory and Theoretical Investigations of the Vibrational Behaviour of a Uniform Rotor with a Transverse Crack B. Schmalhorst 105
ISROMAC 1990 Whirl of Turborotors at High Loads A. D. Dimarogonas 121
ISROMAC 1990 Dynamic Characteristics of Noncontacting Seal and Evaluation of Its Effect on Stability of Rotor System T. Iwatsubo 139
ISROMAC 1990 Flow Visualization in a Single Simulated Brush Seal M. J. Braun, R. C. Hendricks, V. A. Canacci, and M. Kazmierchak 161
ISROMAC 1990 Rotordynamic Coefficients for Stepped Annular Gas Seals C. C. Nelson, M. S. Dunn, and J. K. Scharrer 177
ISROMAC 1990 A Three Volume Bulk Flow Model for the Calculation of Rotordynamic Coefficients of Look-Through Labyrinths R. Nordmann and P. Weiser 191
ISROMAC 1990 Rotordynamic Coefficients for Turbulent Annular Misaligned Seals F. Simon and J. Frene 207
ISROMAC 1990 An Analytical Investigation of a Cryogenic Journal Bearing M. J. Braun and F. K. Choy 225
ISROMAC 1990 Determination of Bearing Dynamic Coefficients from Unbalance Response in Flexible Rotor-Bearing Systems S. - W. Hong and C. - W. Lee 239
ISROMAC 1990 Electromagnetic Bearings, a Reasonable Element in Turbomachinery? R. Siegwart and R. Truninger 253
ISROMAC 1990 An Improvement on the Estimation of the Linear Dynamic Coefficients of Oil-Film Journal Bearing Considering Nonlinear Effect by Parameter Identification in the Frequency-Domain R. H. Zhu, C. S. Chang, and X. K. Tang 269
ISROMAC 1990 Dynamic Characteristics of an Overhung P/A Fan in Rolling Element and Fluid Film Bearings E. J. Gunter, A. Hobbs, and C. Phelps 279
ISROMAC 1990 Component Test Results from the Bearing Life Improvement Program for the Space Shuttle Main Engine Oxidizer Turbopumps J. E. Keba 303
ISROMAC 1990 A Theoretical Calculation of the Pressure and Flow Field of Fluid Film Bearing Under Eccentric Large Whirl Orbit C. -So Chang and H. -F. Cheng 319
ISROMAC 1990 Analysis of the Dynamic Behavior of Rotating Machines by Direct Measurement of Air Gap Variations P. Talas and P. O. Toom 331
ISROMAC 1990 Vibration Protection of Aeration Turbine Gear Motor S. Gajin, S. Kuzmanovic, and G. Varju 349
ISROMAC 1990 A Simple Procedure for Assessing Rotor Stability K. E. Atkins, R. X. Perez, and D. M. Turner 361
ISROMAC 1990 A Method to locate the Source of a Rotor Fluid-Induced Instability Along the Rotor D. E. Bently and R. F. Bosmans 377
ISROMAC 1990 Stability Behaviour of a Three Journal Bearing Rotor System Excited by a lateral Force K. Kwanka 387
ISROMAC 1990 The Role of Flow-Related Tangential Forces in Rotor/Bearing/Seal System Stability A. Muszynska 401
ISROMAC 1990 Nonlinear Interactions Between Resonance and Instability in a Symmetric Rotor S. W. Shaw and J. Shaw 419
ISROMAC 1990 Stability of Rotating Cylindrical Shells Including Nonlinear Stiffening P. Ruge and Th. Plonski 435
ISROMAC 1990 Aeroelastic Analysis of Vertical Axis Wind Turbines A. F. A. A. EI-Sayed 447
ISROMAC 1990 Stochastic Aerodynamic Model for Studying Darrieus Rotor in Turbulent Wind M. T. Brahimi and I. Paraschivoiu 463
ISROMAC 1990 Analytical and Experimental Study of the Hydrodynamic Unbalance of Single-Vane Impellers H. E. Siekmann and M. Stark 479
ISROMAC 1990 Off-Design Behavior of Two Pump-Turbine Model Impellers with Similar Geometry but Different Blade Curvature H. Stepanik and H. Brekke 497
ISROMAC 1990 An Experimental Study of Fluid Forces on a Centrifugal Impeller Rotating and Whirling in a Volute Casing Y. Yoshida and Y. Tsujimoto 513
ISROMAC 1990 Periodic Radial Forces Acting on Screw Centrifugal Pump K. Tanaka, M. Arai, and S. Ikeo 527
ISROMAC 1990 Active Chamber System for Vibration Control of Rotating Machinery J. Althaus and H. Ulbrich 543
ISROMAC 1990 A Magnetic Bearing Control Scheme for Cancelling Submerged Rotor Vibratory Forces H. M. Chen and P. Lewis 559
ISROMAC 1990 Optimal Location of Forces Controlling Vibration of Flexible Rotors Z. Gosiewski and T. Bil 571
ISROMAC 1990 An Adaptive Control Method of Flexible Rotor Vibration Z. Gosiewski and D. Janecki 587
ISROMAC 1990 The Use of Piezoelectric Actuators for Active Vibration Suppression in Rotating Machinery A. F. Kascak, A. B. Palazzolo, R. R. Un, and G. Montague 605
ISROMAC 1990 Development of Sealing Line Calculation in Twin Screw Compressor L. Zhang and J. F. Hamilton 623
ISROMAC 1990 Computer System for Multi-Bearing Rotor Design Z. A. Parszewski and K. Krynicki 639
ISROMAC 1990 Electrostatic Charge Build-up in Lubricating Channels of Turbomachinery J. Seyed- Yagoobi, R. D. Gross, and A. B. Palazzolo 653
ISROMAC 1990 Free Vibration Analysis of a Rotating Workpiece During Machining R. P. S. Han and J. W. Z. Zu 661
ISROMAC 1990 Equations of Motion of a Flexible Rotor with Axially Loose Disc M. Riemer 675
ISROMAC 1990 The Use of Beam-Like Model Data for Stiffness Profile Estimation by the EBS Method: Part 2 - Completion and Benchmarking T. A. Vest and M. S. Darlow 693
ISROMAC 1990 Simulation Research on the Dynamic Characteristics of a Steam-Injected Gas Turbine K.-J. Mao and X-w. Oai 705
ISROMAC 1990 Application of SVD Algorithm to Influence Coefficient Balancing Computation of Flexible Rotors J. M. Yang 719
ISROMAC 1990 On the Asymmetric Vibration of Point-Supported Circular Plates S. Azimi 729
ISROMAC 1992 Reliability Evaluation of Main Feed Water Pump for PWR Plant - Reliability Under Cavitating Conditions Manabe, N.; Yae, S.; Kawakami, T.; Fujii, Y. 581-590 CN003682730
ISROMAC 1992 A Numerical Procedure for Coupled CFD/Thermal Conduction Analysis of Turbine Disks and Disk Cavities Bache, G.; Blumenthal, R.; Swaim, R. 591-600 CN003682742
ISROMAC 1992 Holographic Interferometry Measurement of Turbulent Heat Transfer in a Channel with Semicircular Ribs on Two Opposite Walls Liou, T.-M.; Hwang, G.-J. 601-610 CN003682754
ISROMAC 1992 Computation of Incompressible Viscous Flows Through Turbopump Components Kwak, D.; Kiris, C.; Rogers, S. 611-623 CN003682766
ISROMAC 1992 Local Heat Transfer in a Rotating Square Channel with Smooth Walls and Radial Outward Flow Zhang, Y.; Han, J. C. 624-633 CN003682778
ISROMAC 1992 Approximate Solution Method of Rotating Coaxial Disk Flows with Free Surface under Reduced Gravity Wu, J.; Delgado, A.; Rath, H. J. 634-643 CN003682780
ISROMAC 1992 Interactions between Different Strength Vortices and Injectant Downstream of Film-Cooling Holes in a Turbulent Boundary Layer Ligrani, P. M. 644-653 CN003682791
ISROMAC 1992 Experimental Study by LDV and Flow Visualization on Flow Pattern of Unsteady Flow in Rotating Drums Kawashima, G.; Ohue, H.; Yang, W.-J. 654-662 CN003682808
ISROMAC 1992 Wave Propagation in Rotating Cylinders Seemann, W. 663-672 CN003682810
ISROMAC 1992 Transient Interface Shape in Spin-Up from Rest of a Two-Layer Liquid in a Cylinder Choi, S.; Lim, T. G.; Hyun, J. M. 673-685 CN003682821
ISROMAC 1992 Turbulent Characteristics of the Flow in an Axially Rotating Pipe Imao, S.; Itoh, M.; Harada, T. 686-695 CN003682833
ISROMAC 1992 Study on the Unsteady Flow in Turbomachinery Adachi, T.; Murakami, Y. 696-710 CN003682845
ISROMAC 1992 Numerical Calculations of the Turbulent Flow through a Controlled Diffusion Compressor Blade in Cascade Kang, S. H.; Kim, K. Y.; Lee, J. S.; Kim, Y. H. 711-722 CN003682857
ISROMAC 1992 Development of a Shape-Controlled Airfoil by Use of SMA Tsukamoto, H.; Tanaka, K.; Matsunaga, S.; Tanaka, H. 723-731 CN003682869
ISROMAC 1992 Experimental and Theoretical Investigations on the Effect of the Stagger Angle on the Secondary Flow in Plane Compressor Cascades Stark, U.; Bross, S. 732-746 CN003682870
ISROMAC 1992 Inviscid Flow Solutions of a Transonic Turbine Cascade Using Conservative Zonal Boundaries in a Nonperiodic H-Type Grid Yeuan, J. J.; Tabakoff, W.; Hamed, A. 747-756 CN003682882
ISROMAC 1992 Numerical Simulation of Plane Cascade Viscous Flow Ju, H. B.; Liu, B.; Xiang, Y. M. 757-766 CN003682894
ISROMAC 1992 Historical Development of Fluid Mechanics - Review, Observations, Scope, Chronology, and Bibliography Cheng, K. C. 767-785 CN003682900
ISROMAC 1992 Studies on Ocean Wave Power Generation Plant with Pressure and Flow Direction Control by One Valve Tan, S.; Fukushi, M.; Shimizu, Y. 786-794 CN003682912
ISROMAC 1992 Performance of Wells Type Turbines for Wave Energy Conversion Inoue, M.; Setoguchi, T.; Hamakawa, M.; Kaneko, K. 795-804 CN003682924
ISROMAC 1992 Model and Prototype Performance of Waterjet Propulsion Systems for Small-Scale High-Speed Hydroplane Boat Fujisawa, N.; Ogawa, Y. 805-814 CN003682936
ISROMAC 1992 An Experimental Evaluation of the Design and Performance of Screw-Type Water Turbine Usui, K.; Ohmori, J.; Ushiyama, I. 815-824 CN003682948
ISROMAC 1992 Research and Developments of Straight Wing Non-articulated Vertical Axis Wind Turbine Seki, K.; Matsumoto, T.; Zhang, Y.; Suganami, Z. 825-833 CN003682950
ISROMAC 1992 Studies on Computer Control of Horizontal Axis Wind Turbine and New Inverter Generation System Shimizu, Y.; Mizuno, E.; Morisawa, S. 834-843 CN003682961
ISROMAC 1992 Experimental Studies on the Thrust for the Vertical-Axis Wind Turbines Ushiyama, I.; Mashige, M.; Kakita, Y. 844-852 CN003682973
ISROMAC 1992 Large Scale WTGS and Wind Cluster Development Model Matsumiya, H.; Kawamura, S.; Ogawa, T.; Kumeoka, Y. 853-862 CN003682985
ISROMAC 1992 Performance of a Propeller Type Small Wind Turbine with a Side Vane (Response to the Changes in Wind Speed and Direction) Sawada, T. 863-871 CN003682997
ISROMAC 1992 The Shapes of Inertial and Aerodynamic Troposkiens Ashley, H.; Digumarthi, R. V. 872-888 CN003683000
ISROMAC 1992 Calculations of Dynamic Force of Annular Smooth Seal with Eccentricity Iwatsubo, T.; Ono, M.; Tsujimoto, Y. 889-898 CN003683011
ISROMAC 1992 Self-Induced and Forced Vibrations of Centrifugal Impeller Operating at Supercritical Speed Yoshida, Y.; Tsujimoto, Y.; Murakami, Y.; Ito, T. 899-911 CN003683023
ISROMAC 1992 Unsteady Aerodynamic Analysis on Subsonic Oscillating Cascades Chen, S. H.; Eastland, A. H.; Jackson, E. D. 912-927 CN003683035
ISROMAC 1992 On the Active Optimal Vibration Control of Rotor Systems Fan, G. W.; Nelson, H. D.; Castelazo, L. A.; Zhu, W. 928-937 CN003683047
ISROMAC 1992 Virtual Instability in Rotor-Bearing System; Part I - Measurement Lin, Y. Q.; Vance, J. M. 938-946 CN003683059
ISROMAC 1992 A study on Vibration Characteristics of a High Head Pump Turbine Runner Iwasaki, Y.; Sakamoto, A.; Kanki, H.; Baba, K. 947-956 CN003683060
ISROMAC 1992 An Experimental Investigation of Fluid Exciting Force on a High Head Pump-Turbine Runner Miyagawa, K.; Mutaguchi, K.; Kanki, H.; Iwasaki, Y. 957-966 CN003683072
ISROMAC 1992 Vibrations of a Rotating Flexible Shaft in a Cylindrically Bounded, Viscous, Compressible Fluid Wauer, J. 967-974 CN003683084
ISROMAC 1992 Dynamic Fly Height Characteristics of a Computer Disk Head Slider (I) Yen, J.-Y.; Chen, S.-L.; Liang, H.-S. 975-984 CN003683096
ISROMAC 1992 CFD Aided Design of Centrifugal Pump Impellers Schilling, R.; Watzelt, C.; Haas, H.; Bindewalt, C. 985-993 CN003683102
ISROMAC 1992 Modern Maintenance of Rotating Machines in Mutullurgical Plants Shen, D.; Feng, Z. M. 994-1000 CN003683114
ISROMAC 1992 Fuzzy Input-Neutral Net Adoptive Expert Systems for Diagnosis of Turbo-Machinery Incipient Failures Dimarogonas, A. D. 1001-1008 CN003683126
ISROMAC 1992 Bilinear Analysis for Closing Cracks in Rotating Shafts Dimarogonas, A. D. 1009-1014 CN003683138
ISROMAC 1992 Vibrations of a Rotating Shaft Containing a Transverse Crack (Vibrations at the Secondary Critical Speed) Ishida, Y.; Yamamoto, T. 1015-1024 CN003683140
ISROMAC 1992 New Approach for the Modeling and Simulation of Simple Cracked Rotor Jun, O. S.; Lee, C. W.; Earmme, Y. Y.; Eun, H. J. 1025-1034 CN003683151
ISROMAC 1992 Modal Aspects of Cracks in Rotors Horrigan, D. P. W.; Williams, J. F.; Parszewski, Z. A. 1035-1043 CN003683163
ISROMAC 1992 Natural Vibrations of Cracked Turbine Blades Ostachowicz, W. M.; Krawezuk, M. 1044-1051 CN003683175
ISROMAC 1992 Virtual Instability in Rotor-Bearing System, Part II - Analysis Lin, Y. Q.; Vance, J. M. 1052-1061 CN003683187
ISROMAC 1992 Tilting-Pad Journal Bearings: Part I, Static Performance Szeri, A. Z.; Kim, H. J. 1062-1071 CN003683199
ISROMAC 1992 Tilting-Pad Journal Bearings: Part II, Dynamic Loading Szeri, A. Z.; Kim, H. J. 1072-1081 CN003683205
ISROMAC 1992 Active Bearings for Rotating Machinery Ulbrich, H.; Althaus, J. 1082-1095 CN003683217
ISROMAC 1992 Actively Controlled Tilting Pad Journal Bearings Ulbrich, H.; Santos, I. F.; Pfeiffer, F. 1096-1104 CN003683229
ISROMAC 1992 Effects of an Oversize, Poorly Lubricated Bearing on Rotor Dynamic Response, Part I: Experiment Results Muszynska, A. 1105-1116 CN003683230
ISROMAC 1992 Effects of an Oversize, Poorly Lubricated Bearing on Rotor Dynamic Response, Part II: Analytical Modelling Muszynska, A. 1117-1125 CN003683242
ISROMAC 1992 Flow in Inducer Pumps, an Apercu Acosta, A. J. 13-Jan CN003683254
ISROMAC 1992 Performance of Axial Flow Pump Stage with Variable Geometry Guide Vanes Radke, M.; Siekmann, H. E. 14-23 CN003683266
ISROMAC 1992 A Three-Dimensional Viscous Flow Model of Unsteady Stator/Rotor Interaction MacGregor, J. D.; Baskharone, E. A. 24-37 CN003683278
ISROMAC 1992 Recirculation Development in a Mixed Flow Impeller by LDA Boccazzi, A. 38-47 CN003683280
ISROMAC 1992 Experimental Flow Analysis in a Turbine Spiral Casing Amarante Mesquita, A. L.; Kueny, J. L. 48-57 CN003683291
ISROMAC 1992 A Summary of the Activities of the NASA/MSFC Pump Stage Technology Team Garcia, R.; Schtzenhofer, L. A.; Jackson, E. D. 58-67 CN003683308
ISROMAC 1992 Development of a Subsonic Flow Research Facility for Simulating the Turbomachinery Flow and Investigating Its Effects on Boundary Layer Transition, Wake Development and Heat Transfer Schobeiri, T.; Pardivala, D. 68-84 CN003683310
ISROMAC 1992 Experimental Studies on the Aerodynamic Performance of Axial-Flow Vaneless-Nozzle Turbine Stage Liu, B.; Xiang, Y. M. 85-91 CN003683321
ISROMAC 1992 A Numerical Study of the Flow-Field in Enclosed Turbine Disk Cavities in Gas Turbine Engines Athavale, M. M.; Pazekwas, A. J.; Hendricks, R. C. 92-101 CN003683333
ISROMAC 1992 Experimental Study of the Flow Field Inside a Whirling Annular Seal Morrison, G. L.; Thames, H. D.; DeOtte, R. E. 102-111 CN003683345
ISROMAC 1992 Validation of CFD Codes and Assessment of CFD Simulations Singhal, A. K. 112-126 CN003683357
ISROMAC 1992 Stochastic Sensitivity Measure for Mistuned High-Performance Turbines Murthy, D. V.; Pierre, C. 127-142 CN003683369
ISROMAC 1992 Application of the Asymptotic Acceleration Potential Method for the Calculation of Dynamic Inflow Effects on Horizontal Axis Wind Turbines Hasegawa, Y.; Van Bussel, G. J. W. 143-152 CN003683370
ISROMAC 1992 A Variational Finite Element Analysis for Solving the Direct Problem of Full 3-D Flow in the Centrifugal Pump Chen, K.; Shen, C.; Li, M.; Qin, H. 153-157 CN003683382
ISROMAC 1992 An Explicit-Implicit Numerical Method for Three Dimensional Compressible Navier-Stokes Equations Liu, J. M.; Liu, B.; Xiang, Y. M. 158-165 CN003683394
ISROMAC 1992 A Thompson Method for Three Dimensional Grid Generation Liu, S. Z.; Liu, J. M.; Liu, B.; Xiang, Y. M. 166-170 CN003683400
ISROMAC 1992 Numerical Simulation of Three-Dimensional Flow Fields on Vertical-Axis Wind Turbines Allet, A.; Paraschivoiu, I. 171-180 CN003683412
ISROMAC 1992 Investigations of a By-Pass Turbulent Spot with Reference to Boundary Layers on Turbomachinery Blading Gostelow, J. P.; Hong, G.; Sheppeard, M. 181-194 CN003683424
ISROMAC 1992 Numerical Calculation of Rotor-Stator Interaction and Its Acoustics Tang, W. 195-203 CN003683436
ISROMAC 1992 Some Sealing Concepts - A Review; Part A - Industrial, Proposed, and Dynamic Hendricks, R. C.; Carlile, J. A.; Liang, A. D. 204-221 CN003683448
ISROMAC 1992 Some Sealing Concepts - A Review; Part B - Brush Seal Systems Hendricks, R. C.; Carlile, J. A.; Liang, A. D. 222-233 CN003683450
ISROMAC 1992 From Labyrinth Seals to Damping Seals/Bearings Von Pragenau, G. L. 234-242 CN003683461
ISROMAC 1992 Design and Analysis of a Controllable Mechanical Seal for Aerospace Applications Wolff, P.; Salant, R. F. 243-252 CN003683473
ISROMAC 1992 Brush Seal Leakage Correlations Based on Effective Thickness Chupp, R. E.; Holle, G. F.; Dowler, C. A. 253-261 CN003683485
ISROMAC 1992 The Coupling of Shaft and Mechanical Face Seal Dynamics Using the Complex Extended Transfer Matrix Method Green, I.; Lee, A. S. 262-271 CN003683497
ISROMAC 1992 Investigation of Flows in Bristle and Fiberglass Brush Seal Configurations Braun, M. J.; Hendricks, R. C.; Carlile, J. A.; Yoder, D. 272-282 CN003683503
ISROMAC 1992 Study of Heat Transfer and Leakage in High Rotating Stepped Labyrinth Seals Waschka, W.; Scherer, T.; Kim, S.; Wittig, S. 283-292 CN003683515
ISROMAC 1992 The Calculation of Friction Factors in a Labyrinth Seal by Means of Turbulent Flow Computation Ortinger, W. 293-302 CN003683527
ISROMAC 1992 A Study of Flow characteristics in a Shear Layer Driven Cavity with a Penetrating Jet Braun, M. J.; Dong, Q.; Choy, F. K.; Hendricks, R. C. 303-312 CN003683539
ISROMAC 1992 Flow Between Corotating Enclosed Disks with a Ventilated Hub Eaton, J. K.; Chiang, C. 313-322 CN003683540
ISROMAC 1992 Transient Development of Flow Between Corotating Shrouded Disk Choi, S.; Kim, J. S.; Hyun, J. M.; Lim, T. G. 323-330 CN003683552
ISROMAC 1992 Effects of Coriolis Force on Flow in Rotating Diffusers Koyama, H. S.; Uchikawa, K.; Nigim, H. H. 331-340 CN003683564
ISROMAC 1992 Numerical Analysis of Impeded Flow in an Eccentric Rotating Thermosyphon Zhao, L.; Lock, G. S. H. 341-348 CN003683576
ISROMAC 1992 Impeded Flow in a Rotating Concentric Thermosyphon Zhao, L.; Lock, G. S. H. 349-355 CN003683588
ISROMAC 1992 Induced Flow and Torque Characteristics of a Slitted Disc Enclosed in a Cylinder Kikuyama, K.; Nakaoka, M.; Yamazaki, M. 356-365 CN003683590
ISROMAC 1992 Experimental Investigation of the Transonic Flow Field in a Turbine Cascade Carscallen, W. E.; Moustapha, S. H.; McGeachy, J. D. 366-375 CN003683606
ISROMAC 1992 Three-Dimensional Transport Phenomena of a Turbine Blade in a Flow Region Without the Influence of Endwall Chen, P. H.; Chen, C. H.; Chen, J. J.; Chen, J. W. 376-385 CN003683618
ISROMAC 1992 The Three-Dimensional Flow Structure Near the Cut-Off Region of a Centrifugal Pump Chu, S.; Dong, R.; Katz, J. 386-395 CN003683620
ISROMAC 1992 Three-Dimensional Computation of Low Frequency Unsteady Transonic Flow and Dynamic Strain in Axial Turbine Stages Mayer, J. F.; Schaber, V.; Stetter, H. 396-405 CN003683631
ISROMAC 1992 Numerical Study on Three-Dimensional Viscous Flows Through Turbine Cascades Yoo, J. Y.; Yun, J. W. 406-415 CN003683643
ISROMAC 1992 A Three-Dimensional Viscous Flow Study Inside SSME Turbine Stages Han, C.; Kwon, O.; Shoemarker, M. 416-424 CN003683655
ISROMAC 1992 Numerical Simulation of Reciprocating Compressor Kim, H. J.; Ryou, H. S.; Chung, H. T. 425-431 CN003683667
ISROMAC 1992 An Expert System for Off-Line Condition Monitoring of Rotating Machinery Rao, J. S.; Rao, P. N.; Mehra, A. 432-440 CN003683679
ISROMAC 1992 Convective Heat Transfer in Rotating Channel Hwang, G. J.; Soong, C. Y. 441-459 CN003683680
ISROMAC 1992 Transport Phenomena in Laminar Developing Flow of Rotating Heated Channels Fann, S.; Yang, W.-J.; Mochizuki, S. 460-474 CN003683692
ISROMAC 1992 Experimental Study of Convection Heat Transfer in a Radially Rotating Square Duct with Uniform Heat Flux Hwang, G. J.; Guo, C. R. 475-489 CN003683709
ISROMAC 1992 Visualization of Flow Patterns in 180-Degree Sharp Turn of a Square Duct Cheng, K. C.; Shi, L.; Kurokawa, M.; Chyu, M. K. 490-497 CN003683710
ISROMAC 1992 Visualization of Instability Phenomena in a Rotating Curved Rectangular Channel with Aspect Ratio 10 Cheng, K. C.; Wang, L.; Faulkner, B. G. 498-509 CN003683722
ISROMAC 1992 An Experimental Investigation of Heat Transfer in the Entrance Region of an Annulus Between Independently Rotating Tubes Pfitzer, H.; Beer, H. 510-519 CN003683734
ISROMAC 1992 Metal Fiber Based Clearance Control Seals for Gas Turbine Engines Tolokan, R. P.; Jarrabet, G. P.; Howe, H. W. 520-529 CN003683746
ISROMAC 1992 Engine Panel Seals for Hypersonic Engine Applications: High Temperature Leakage Assessments and Flow Modeling Steinetz, B. M.; Mutharasan, R.; Du, G. W.; Miller, J. H. 530-541 CN003683758
ISROMAC 1992 A New Compliant Seal Concept for Aerospace Applications Gardner, J.; Basu, P.; Datta, A. 542-561 CN003683760
ISROMAC 1992 Novel Nonhomogeneous Monotonic Finite-Difference Scheme for the Thermo-Fluid Transport Phenomena Kudriavtsev, V. V. 562-569 CN003683771
ISROMAC 1992 Finite Element Solution of Viscous Compressible Flows in Gas Turbine Components Hayashi, W. G.; Peeters, M. F.; Ghaly, W. S.; Gauthier, P. Q. 570-580 CN003683783
ISROMAC 1994 Keynote Paper: Interactive Development of Seals, Bearings, and Secondary Flow Systems with the Power Stream Hendricks, R. C.; Steinetz, B. M.; Athavale, M. M.; Przekwas, A. J.; Braun, M. J.; Dozozo, M. I.; Choy, F. K.; Kudriavtsev, V. V.; Mullen, R. L.; von Pragenau, G. L. 1-40 CN038956267
ISROMAC 1994 Low-Speed Flexible Rotor Balancing for Smooth High-Speed Operation with Active Magnetic Bearings Ku, C.-P. R.; Chen, H. M. 41-50 CN038956279
ISROMAC 1994 Upstream Swirl Effects Upon the Flow Field Inside a Centered Annular Seal Morrison, G. L.; Shresta, S.; DeOtte, R. E.; Johnson, M. C. 51-70 CN038956280
ISROMAC 1994 Analysis of Fluid Flow in Micromotor Jha, R.; Mullen, R. L.; Mehregany, M. 71-87 CN038956292
ISROMAC 1994 Effects of a Hydrostatic Pocket Shape on the Flow Pattern and Pressure Distribution Braun, M. J.; Dzodzo, M. 88-106 CN038956309
ISROMAC 1994 Transient and Steady State Dynamic Analysis of a Foil Bearing Braun, M. J.; Choy, F. K.; Dzodzo, M.; Hsu, J. 107-118 CN038956310
ISROMAC 1994 A Small Perturbation CFD Method for Calculation of Seal Rotordynamic Coefficients Athavale, M. M.; Hendricks, R. C. 119-136 CN038956322
ISROMAC 1994 Metallographic Analysis of Brush Bristle and Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine Hendricks, R. C.; Griffin, T. A.; Bobula, G. A.; Bill, R. C.; Hull, D. R.; Csavina, K. R. 137-152 CN038956334
ISROMAC 1994 Observations of Vortex Shedding in the Wake from Transonic Turbine Nozzle Vanes Carscallen, W. E.; Gostelow, J. P. 153-169 CN038956346
ISROMAC 1994 Convex Curvature Effect on the Wake Including Recovery from the Curvature You, S. M. 170-187 CN038956358
ISROMAC 1994 On the Development of Two-Dimensional Wakes within Curved Channels Experimental and Theoretical Investigation Schobeiri, M. T.; John, J.; Pappu, K. 188-215 CN038956360
ISROMAC 1994 Measurements of the Influence of Integral Length Scale on Stagnation Region Heat Transfer Van Fossen, G. J.; Ching, C. Y. 216-235 CN038956371
ISROMAC 1994 The Use of Transition Region Characteristics to Improve the Numerical Simulation of Heat Transfer in Bypass Transitional Flows Simon, F. F. 236-252 CN038956383
ISROMAC 1994 Effects of Nonuniform Pitch on the Flow Through an Annular Turbine Nozzle Kurz, R. 253-267 CN038956395
ISROMAC 1994 Thermal Transients of a Cooled Gas Turbine Nozzle Guide Vane Matcharajan, B.; Seetharamu, K. N. 268-285 CN038956401
ISROMAC 1994 Numerical Analysis of Pelton Nozzles Alarcon, G.; Avila, M.; Gomez, L. 286 CN038956413
ISROMAC 1994 The Simulation for the Working Process of Multi-Vane Expander Dong, Y. 287-294 CN038956425
ISROMAC 1994 A Comparison of Numerical and Experimental Results of a Centrifugal Impeller Flow Chen, W.-C.; Eastland, A. H.; Brozowski, L.; Darian, A. D. 295-308 CN038956437
ISROMAC 1994 A Computational Definition for the Geometry of the Blades of a Centrifugal Compressor Avia, M.; Gomez, L.; Alarcon, G. 309-320 CN038956449
ISROMAC 1994 The Hydrodynamic Characteristics of Centrifugal Impeller Wakes Chen, S. H.; Chen, W. C.; Prueger, G. H.; Brozowski, L. 321 CN038956450
ISROMAC 1994 A Study of Some Factors Affecting the Effectiveness of Casing Treatment in a Contra-rotating Axial Compressor Stage Pundhir, D. S. 322-327 CN038956462
ISROMAC 1994 Effect of Inlet Duct and Diffusers on the Operating Range of Centrifugal Compressors Agrawal, D. P.; Salim, B.; Singh, S. N.; Malhotra, R. C. 328-339 CN038956474
ISROMAC 1994 Studies on Geographical Effects to Performance of Horizontal Axis Wind Turbine Shimizu, Y.; Maeda, T.; Tan, S.; Arako, T.; Otsuka, S. 340-355 CN038956486
ISROMAC 1994 Yaw Performance of a Small Horizontal Axis Wind Turbine with a Side Van Sawada, T.; Su, Y.; Sugiyama, W. 356-367 CN038956498
ISROMAC 1994 Aerodynamic Analysis Models for Vertical-Axis Wind Turbines Brahimi, M. T.; Allet, A.; Paraschivoiu, I. 368-381 CN038956504
ISROMAC 1994 Effect of Film Injection Location on Local Heat Transfer Coefficient on a Gas Turbine Blade Mehendale, A. B.; Jiang, H. W.; Ekkad, S. V.; Han, J.-C. 382-397 CN038956516
ISROMAC 1994 Heat Transfer Characteristics in a Rotating Square Channel with Radially Outward/Inward Throughflows Mochizuki, S.; Murata, A.; Yang, W.-J. 398-408 CN038956528
ISROMAC 1994 Turbulence and Scale Measurements in Ribbed Channels Rivir, R. B.; Chyu, M. K. 409-410 CN038956530
ISROMAC 1994 Visualization of Local Heat Transfer in Serpentine Channels with Liquids Crystals Lau, S. C.; Russell, L. M.; Thurman, D. R.; Hippensteele, S. A. 411-423 CN038956541
ISROMAC 1994 Film Cooling Effectiveness Data for Simple Injection Geometries: A Collection of Three-Axis Plots Stone, L. D.; Goldstein, R. J. 424-440 CN038956553
ISROMAC 1994 Investigation of Three-Dimensional Leading Edge Film Cooling on Turbine Blades Schulz, A.; Jiang, Z.; Sieger, K.; Wittig, S. 441-453 CN038956565
ISROMAC 1994 Gas Turbine Blade Heat Transfer Calculations: An Assessment of Different Low - Reynolds Number k, epsilon- Turbulence Models Sieger, K.; Schiele, R.; Schulz, A.; Wittig, S. 454-472 CN038956577
ISROMAC 1994 A Numerical Investigation of Cooling of Leading Edge of Turbine Blade Using Forced Convection Heat Transfer Murty, V. D.; Camden, M. P.; Clay, C. L.; Anselmo, E. R. 473-485 CN038956589
ISROMAC 1994 Comparison of Film Cooling Performance Downstream of Compound Angle and Simple Angle Holes Ligrani, P. M. 486-499 CN038956590
ISROMAC 1994 Convective Heat Transfer in a Radially Rotating Square Duct with Wall-Transpiration Yan, W. M. 500-511 CN038956607
ISROMAC 1994 LHI Study of Developing Heat Transfer in a Duct with a Detached Rib Array Liou, T. M.; Wang, W.-B. 512-531 CN038956619
ISROMAC 1994 Aspect Ratio Effect on Convective Heat Transfer of Radially Outward Flow in Rotating Rectangular Ducts Kuo, C. R.; Hwang, G. J. 532-545 CN038956620
ISROMAC 1994 Visualization of Local Heat Transfer in Serpentine Channels Via Liquid Crystals Lau, S. C.; Hippensteele, S. A.; Russell, L. M.; Thurman, D. R. 546 CN038956632
ISROMAC 1994 Local Heat Transfer Distribution at a Sharp 180{o Turn Downstream of a Ribbed Square Channel Kandis, M.; Lau, S. C.; Rajesh, G. 547 CN038956644
ISROMAC 1994 An Experimental and Numerical Investigation of Turbulent Flow and Heat Transfer in the Entrance Region of an Annulus Between Rotating Tubes Rothe, T.; Beer, H. 548-560 CN038956656
ISROMAC 1994 Numerical and Experimental Study of Bifurcation Phenomena in a Finite-Length Taylor-Couette Flow Ohmura, N.; Kataoka, K.; Kataoka, T.; Naitoh, Y. 561-572 CN038956668
ISROMAC 1994 Phase Resolved LDV-Measurements in High-Speed Rotating Disk Systems with Orifices Jakoby, R.; Benz, E.; Willman, M.; Wittig, S. 573-592 CN038956670
ISROMAC 1994 A Numerical Analysis on Flow and Heat Transfer in the Entrance Region of an Axially Rotating Pipe Torii, S.; Yang, W.-J. 593-605 CN038956681
ISROMAC 1994 Ekman Boundary Layers and Energy Dissipation in Rotating Drums During Spin-Down Process Inoue, H.; Yang, W.-J.; Kawashima, G. 606-616 CN038956693
ISROMAC 1994 Transient Stewartson Layers in a Compressible Rotating Gas Park, J. S.; Hyun, J. M. 617-629 CN038956700
ISROMAC 1994 Prandtl Number Effects on Mixed Convection between Rotating Coaxial Disks Soong, C.-Y. 630-642 CN038956711
ISROMAC 1994 The Effect of Superimposed Axial Flow on Taylor-Couette Flow at Large Taylor Numbers Shih, A. C.; Hunt, M. L. 643-662 CN038956723
ISROMAC 1994 Heat Transfer Measurements on a Rotating Disk Cardone, G.; Astarita, T.; Carlomagno, G. M. 663-672 CN038956735
ISROMAC 1994 Prediction of Heat Transfer for Turbulent Flow in Rotating Radial Duct Tekriwal, P. 673-688 CN038956747
ISROMAC 1994 Secondary Flow Phenomena in Rotating Radial Straight Pipes Cheng, K. C.; Wang, L. 689-700 CN038956759
ISROMAC 1994 Local Heat Transfer Measurements Near a Sharp 180{o Turn of a Two-Pass Smooth Square Channel with a Transient Liquid Crystal Image Technique Ekkad, S. V.; Han, J.-C. 701-716 CN038956760
ISROMAC 1994 Impeller Flow Field Laser Velocimeter Measurements Brozowski, L. A.; Ferguson, T. V.; Rojas, L. 717-729 CN038956772
ISROMAC 1994 An Integrated Flow Analysis System for the Recalculation of Hydraulic Machinery Bladings Haas, H.; Riedel, N.; Watzelt, C.; Schilling, R. 730-743 CN038956784
ISROMAC 1994 Effect of Main Stream Void Distribution on Thin Hydrofoil Ito, J. 744 CN038956796
ISROMAC 1994 Critical Cavitation Number for Vertical-Axis Propeller Lithterov, L. 745-754 CN038956802
ISROMAC 1994 Experimental Study and Numerical Comparison of Flow Characteristics on an Air Test - Model of the Inducer of the LH~2 VULCAIN engine Bois, G.; Geai, P.; Vouillarmet, A. 755-777 CN038956814
ISROMAC 1994 An Integrated Flow Analysis System for the Recalculation of Hydraulic Machinery Bladings Haas, H.; Riedel, N.; Watzelt, C.; Schilling, R. 778 CN038956826
ISROMAC 1994 Flow Analyses for Marine Propeller Lee, Y.-T.; Hah, C.; Loellbach, J. 779-791 CN038956838
ISROMAC 1994 The Development of a Volume-of-Fluid Methodology for Computations of Cavitating Turbomachinery Flows Liang, P. Y. 792-794 CN038956840
ISROMAC 1994 Keynote Paper: Rotordynamics Aspects of Rotating Stall in Radial Compressors Bently, D. E. 1 CN038956851
ISROMAC 1994 Identification Procedures as Tools for Fault Diagnosis of Rotating Machinery Seibold, S.; Fritzen, C. P. 37303 CN038956863
ISROMAC 1994 Systematic Approach for Diagnosis/Solution of Problem of High Vibrations/Shaft Failures in Boiler Feed Pumps Chander, T.; Ghosh, M.; Rajamani, A.; Bhave, S. K. 17-42 CN038956875
ISROMAC 1994 Explaining Turbine Vibration Changes Due to Load Variation Using Numerical Model of 650 MW Unit Chalko, T. J.; Li, D. X. 43-54 CN038956887
ISROMAC 1994 Identification of Rotordynamic Coefficients of Centrifugal Pump Components Using Active Magnetic Bearings Matros, M.; Neumer, T.; Nordmann, R. 55-72 CN038956899
ISROMAC 1994 Rotordynamic Coefficients of Long Staggered Labyrinth Seals Kwanka, K.; Ortinger, W. 73-85 CN038956905
ISROMAC 1994 The Influence of Swirl Brakes and a Tip Discharge Orifice on the Rotordynamic Forces Generated by Discharge-to-Suction Leakage Flows in Shrouded Centrifugal Pumps Sivo, J. M.; Acosta, A. J.; Brennen, C. E.; Caughey, T. K. 86-97 CN038956917
ISROMAC 1994 Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps Dues, M. W.; Kallweit, S. D.; Siekmann, H. E. 98-112 CN038956929
ISROMAC 1994 Analysis of the Vibration Characteristics for a Rotor-Bearing System Using Distributed Spring and Damper Model Han, D. C.; Choi, S. H.; Lee, Y. H. 113-121 CN038956930
ISROMAC 1994 Dynamic Stability of an Elastic Rotating System: Shell-Disc-Shaft Ruge, P.; Senker, P. 122-134 CN038956942
ISROMAC 1994 Dynamics of a Planetary Gear-Rotor-Bearing System Modeled With Finite Elements Chen, C. S.; Natsiavas, S.; Nelson, H. D. 135-145 CN038956954
ISROMAC 1994 Dynamics of Vertical Axis Wind Turbines (Darrieus Type) El-Sayed, A. F.; Hirsch, C.; Derdelinckx, R. 146-164 CN038956966
ISROMAC 1994 Dynamics of the Rotating Rigid Body with High-Frequency Vibrating Foundation Dobrinskaya, T. A. 165-172 CN038956978
ISROMAC 1994 Interaction of Parametric and Forced Vibrations in High Speed Rotor-Bearing-Systems Weyh, B. 173-188 CN038956980
ISROMAC 1994 On the Precession Frequencies and Critical Speeds of a Spinning Beam Zu, J. W.; Han, R. P. S.; Lu, J. 189-203 CN038956991
ISROMAC 1994 Dynamic Analysis of Composite Rotors Singh, S. P.; Gupta, K. 204-219 CN038957004
ISROMAC 1994 Application of Multi-Mode Models in Rotor Dynamics Muszynska, A. 220-233 CN038957016
ISROMAC 1994 Application of Multi-Mode Models and the Root Locus Technique for Stability Analysis of Rotor Systems Muszynska, A.; Hatch, C. T.; Bently, D. E. 234-246 CN038957028
ISROMAC 1994 The Dynamic Forces of Pump Annular Seals Induced by Two Phase Flow Iwatsubo, T.; Nishio, T. 247-263 CN038957030
ISROMAC 1994 Analytical and Experimental Analysis of a Self Compensating Dynamic Balancer in a Rotating Mechanism Lee, J.; Van Moornem, W. K.; Kimbrough, S. 264-282 CN038957041
ISROMAC 1994 Vibrational Aspects of Coupled Axial Turbomachinery Blading Mayer, J. F. 283-293 CN038957053
ISROMAC 1994 In-Plane Structural Vibration in Ball Bearings Mehra, K.; Datta, J.; Farhang, K. 294-315 CN038957065
ISROMAC 1994 A Formulation for Predicting Structural Vibration of Ball Bearings in Three Dimensions Mehra, K.; Farhang, K. 316 CN038957077
ISROMAC 1994 Dynamical Behavior of Mechanical Non-Holonomic System for Speed Regulation Zlokolica, M.; Cveticanin, L. J. 317-324 CN038957089
ISROMAC 1994 The Effect of Ejector Capacity Upon Dynamic Stability of Steam Turbine Regulating System Lin, G.; Lu, P.-Y. 325-337 CN038957090
ISROMAC 1994 Acceleration Characteristics of a Flexible Rotor System Supported on Nonlinear Squeeze Film Damper Changsheng, Z. 338-347 CN038957107
ISROMAC 1994 Dynamics of Multi-Disk Rotors Containing a Transverse Symmetrical Crack Mioduchowski, A. 348 CN038957119
ISROMAC 1994 Dynamical Behavior of a Cracked Rotating Shaft Surella, M. M.; Krousgrill, C. M. 349-368 CN038957120
ISROMAC 1994 On Linear Model Representation of Rolling Bearings Mehra, K.; Datta, J.; Farhang, K. 369 CN038957132
ISROMAC 1994 Dynamic Response of the Flexspline in Dual-Roller Harmonic Drives Carney, T.; Farhang, K. 370 CN038957144
ISROMAC 1994 Constructive Modifications for Control of Severe Erosion on Impellers of Centrifugal Pumps for Fertilizer Slurries zarea, S.; Martinez, M. A. 371-382 CN038957156
ISROMAC 1994 Application of Neural Networks to Quantitative Flow Visualization Kimura, I.; Kuroe, Y.; Ozawa, M. 383-394 CN038957168
ISROMAC 1994 Observation of the Shape and Size of Bubbles Generated in a Molten Metal Bath using an X-ray Fluorescope Iguchi, M.; Uemura, T.; Takanashi, N.; Ogawa, Y.; Tokumitsu, N.; Morita, Z. 395-407 CN038957170
ISROMAC 1994 Pattern Tracking Algorithm Using Successive Abandonment Kaga, A.; Inoue, Y.; Yamaguchi, K. 408-422 CN038957181
ISROMAC 1994 Measurement of Near-Periodic Cylinder Wake by PIV Murata, S. 423-440 CN038957193
ISROMAC 1994 Digital PTV Measurements of a Separated Air Flow behind a Backward Facing Step Adachi, T.; Nishino, K.; Torii, K. 441-460 CN038957200
ISROMAC 1994 Visualization and Image Processing of the Flow in and around a Savonius Rotor Fujisawa, N.; Taguchi, Y. 461-471 CN038957211
ISROMAC 1994 Application of Image Processing Measurement to a Relative Flow in a Pump-Turbine Runner Hayami, H. 472 CN038957223
ISROMAC 1994 Particle Image Velocimetry around the Vortex Dimple at Free Surface Okamoto, K. 473-483 CN038957235
ISROMAC 1994 A Laser Speckle Photography Technique for Measuring Local and Global Heat Transfer Correlation Coefficients Walsh, T. E.; Kihm, K. D. 484-494 CN038957247
ISROMAC 1994 Digital Image Analysis for the Incoherent Medium Density PIV Uemura, T.; Iguchi, M.; Morita, Z.-I. 495-503 CN038957259
ISROMAC 1994 Comparison between Classical and Three Colours PIV in a Wake Flow Cenedese, A.; Romano, G. P. 504-519 CN038957260
ISROMAC 1994 Time-MeanVelocity Field Measurement using Visualized Flow Images Okuno, T.; Nishio, S.; Kimoto, N. 520-526 CN038957272
ISROMAC 1994 A Three Dimensional Turbulent Boundary Layer Analysis for Turbomachinery Applications Amorim, J. C. C. 527-537 CN038957284
ISROMAC 1994 Numerical Prediction of THREE-DIMENSIONAL Turbomachinery Flow Using a Time-Marching Algorithm Wang, B. B.; Li, F.; Lee, W. C. 538-549 CN038957296
ISROMAC 1994 Steady and Unsteady Navier-Stokes CFD Methods for the Design Application of Turbomachinery Hah, C. 550-553 CN038957302
ISROMAC 1994 Numerical Investigation of Unsteady Gust Effect on Turbomachinery Cascade Blade Tang, W. 554 CN038957314
ISROMAC 1994 Three-Dimensional Viscous Flows through an Axial Flow Fan Kim, K.-Y.; Kim, S.-H.; Kim, T.-J.; Jang, C.-M. 555-565 CN038957326
ISROMAC 1994 Navier-Stokes Computations for the Complex 3-D Flow Fields of Inducers and Centrifugal Impellers Bache, G. 566-585 CN038957338
ISROMAC 1994 A Thermal Design Approach for Natural Air Cooled Electronic Equipment Casings Ishizuka, M. 586-599 CN038957340
ISROMAC 1994 Vortex Behavior around Two Tandem Circular Cylinders at Various Spacings above a Flat Plate Okui, K.; Yamane, R.; Takegoshi, E.; Iwabuchi, M.; Hirasawa, Y. 600-613 CN038957351
ISROMAC 1994 A New Theory and Experiments on Absorption of Refrigerant Vapors into Falling Liquid Films Guo, K.-H.; Chen, L.-P.; Shu, B.-F. 614-626 CN038957363
ISROMAC 1994 Application of Heat Transfer Technologies to Electronic Equipment Yeh, L. T. 627-650 CN038957375
ISROMAC 1994 The Effect of Noncondensable Gases in Condensation on Condensers Zhang, C. 651-671 CN038957387
ISROMAC 1994 Drag Reduction of Circular Cylinder with Surface-Grooves in the High Reynolds-Number Range Adachi, T.; Ozaki, T.; Yamamoto, Y.; Matsuuchi, K.; Kawai, T. 672-688 CN038957399
ISROMAC 1994 Experimental and Numerical Study of Transient Natural Convection in Inclined Enclosures Gau, C.; Jeng, D. Z. 689-709 CN038957405
ISROMAC 1994 Mixed Convection between Horizontal Parallel Plates Mahgoub, M.; Wasel, M. G.; Ghith, M. S. 710-720 CN038957417
ISROMAC 1994 A Numerical Study on Turbulent Couette Flow and Heat Transfer in Concentric Annuli by Means of a Reynolds Stress Turbulence Model Torii, S.; Yang, W.-J. 721-734 CN038957429
ISROMAC 1994 Development and Experiments of a System Using Sprinklers for Melting the Snow on Guideway on Which Magnetically Levitated Train Runs Yamazaki, M.; Hamajima, M.; Nishimura, K.; Sawase, K.; Ueno, S.; Kawamura, H. 735-742 CN038957430
ISROMAC 1994 Water Sprinkler Spraying Water Rectangularly and Keeping the Track Snow Deposit Wet Sawase, K.; Kurosaki, Y.; Sugaya, W.; Ueno, S.; Kawamura, H. 743-756 CN038957442
ISROMAC 1994 Flow Characteristics of the Spin-Dryer Cho, C. H.; Park, J. S.; Cho, K. Y.; Sohn, D. S.; Lim, K. S.; Chun, K. B.; Sung, H. J. 757-758 CN038957454
ISROMAC 1994 High Speed Centrifugal Casting of Metal Matrix Composites Berger, R.; Dharan, C. K. 759-778 CN038957466
ISROMAC 1994 Transient Temperature Distribution of Work Rolls Subject to Asymmetric Multiple Zone Cooling Guo, R.-M. 779-798 CN038957478
ISROMAC 1994 A Nonsimilar Boundary Layer on a Moving Wall Gorla, R. S. R. 799-810 CN038957480
ISROMAC 1994 Couette Flow Heat Loss Model for the Rotary Combustion Engine Gorla, R.; Bartrand, T. A. 811-827 CN038957491
ISROMAC 1994 Experimental Investigation of Steady and Unsteady Flow Field Downstream of an Automotive Torque Converter Turbine and Stator Marathe, B. V.; Lakshiminarayana, B. 828-874 CN038957508
ISROMAC 1994 A Study on Shifting Transient Characteristics of an Automotive Transmission with a Torque Converter Lim, W. S.; Jho, H. S.; Park, Y. I.; Lee, J. M. 875-886 CN038957510
ISROMAC 1994 Surface Flows Inside Automotive Torque Converters Lee, J.-S.; Ay, H.; Yang, W.-J.; Lee, G. 887-899 CN038957521
ISROMAC 1996 Dynamics of Anisotropically Supported Rotors Agnes Muszynska, Charles T. Hatch and Donald E. Bently 1
ISROMAC 1996 Studies in Spontaneous Sidebanding in Rotordynamics Fredric Ehrich 11
ISROMAC 1996 Blade Deterioration in a Gas Turbine Engine W. Tabakoff, A Hamed and V. Shanov 21
ISROMAC 1996 Experimental Observations of Rotor Vibration in Subcritical/Supercritical Operation, Including Backward Whirl Knox T. Millsaps and Frank A Simei, Jr. 31
ISROMAC 1996 Applications of Complex Time Series for Rotor Dynamics Identification Jong-po Park and Chong-Won Lee 38
ISROMAC 1996 Experimental Identification of the Foundation Dynamic Stiffness Parameters of Rotor-Bearing-Foundation Systems N.S. Feng and E.J. Hahn 48
ISROMAC 1996 System Rotordynamics Model Based on a Hybrid Composition of the Global Deformation Jorg Wauer 58
ISROMAC 1996 Bearing Alignment Estimation in Rotating Machinery Tom J. Chalko and Dong-Xu Li 68
ISROMAC 1996 A Dynamic Analysis of a Flexible Rotor in Ball Bearings with Nonlinear Stiffness Characteristics Dong-Soo Lee and Dong-Hoon Choi 78
ISROMAC 1996 Lateral Vibration Analysis of the Rotor System with Magnetic Forces Dong-aui Han and Ho-Jee Moon 87
ISROMAC 1996 Nonlinear Simulation of Lateral Vibration of an Experimental Rotor-Journal Bearing System Zhiming Zhang and Zhigang Li 97
ISROMAC 1996 Optimum Balancing of Rotating Machinery Using Genetic Algorithm Won-Ho Choi, Bo-Suk Yang and Ho-Jin Joo 106
ISROMAC 1996 An Algorithm for the Computation of Imbalance Change in Rotating Machines Jie Ding 116
ISROMAC 1996 An Analysis of the Vibration due to the Wheel Imbalance in a Single Wheelset Suspension System Young-Hyu Choi, Chee-Ryong Joe and Jin-Min Choi 123
ISROMAC 1996 An Algorithm for Crack Orientation Identification on a Rotor Oh Sung Jun and Chong-Won Lee 133
ISROMAC 1996 Problem on the Vibration Measurement on a Turbo-Generator Shaft with an Eddy Current Probe Shao Yasheng, Wei Yougen and Tang Qing 143
ISROMAC 1996 Nonlinear Multibody Formulation for Rotorcraft Analysis Nam-Kook Kang 149
ISROMAC 1996 Determination of Three-Dimensional Forces and Torques in an Impulse Turbine Anand M. Sharan and Sunil Agarwal 159
ISROMAC 1996 Performance Prediction of Rotating Machinery Having Power Split/Circulated Transmission Han-Sang Jo, Wook-Jin Jang, Jang-Moo Lee, Yeong " Park and Weon-Sig Lim 169
ISROMAC 1996 Shape Design of Disk Cam Mechanisms Using Instant Velocity Centers Joong-Ho Shin, Choon-Man Lee and Jong-Soo Kim 178
ISROMAC 1996 Experimental Modal Analysis of a Hard Disk Drive Spindle Carrying Multiple Disks Monty Low and LY. Shen 187
ISROMAC 1996 Identification of the Quadrature Resonances Using Modal Nonsynchronous Perturbation Testing and Dynamic Stiffness Approach for an Anisotropic Rotor System with Fluid Interaction Eungu Jang, Agnes Muszynska, Young-Pil Park and Chang-Ho Kim 195
ISROMAC 1996 A Computer Program Package for Forced Vibration and Life Estimation of Tuned and Mistuned Bladed Discs R. Rzadkowski 205
ISROMAC 1996 Vibration Analysis of Rotating Laminated Composite Blades Using a Finite Element Technique Georges Jacquet-Richardet and Pascal Swider 217
ISROMAC 1996 Vibration of Pretwisted Cantilever Shallow Conical Shells of Non-Uniform Cross-Section C.W. Lirn, S. Kitipornchai and K.M. Liew 227
ISROMAC 1996 Dependence on Blade Arrangements of Mistuned Bladed Disc of the Optimal and Critical Resonant Responses H. Yiu and D.J. Ewins 237
ISROMAC 1996 Blade Stresses and Life Estimation Under Flow Path Excitation Nalinaksh S. Vyas, K. V. Subba Rao and J.S. Rao 252
ISROMAC 1996 Frictional Damping on the Dynamic Behaviour of Composite Blades Ting-Nung Shiau and Yung-Dann Yu 262
ISROMAC 1996 Advanced Computer Simulation of Rotating Machinery Probabilistic Critical speed Determination by Receptance Based Reanalysis Timothy S. Barrett, Alan B. Palazzolo and Albert F. Kascak 272
ISROMAC 1996 An Efficient Method for Computation of Unbalance Responses of Rotor Bearing Systems Jong-Heuck Park and Seong-Wook Hong 289
ISROMAC 1996 Computer Modelling of a Gas Centrifuge Musa Al-Ajlouni, Andy Hitchings and Nick Syred 299
ISROMAC 1996 Investigation about Electrorheological Squeeze Film Damper Applied to Active Control of Rotor Dynamic Benjamin Pecheux, Olivier Bonneau and Jean Frene 309
ISROMAC 1996 Effects of Stagger and Pretwist Angles on the Vibration of Flexible Shaft-Bladed Disk Systems Sang-Bok Chun and Chong-Won Lee 318
ISROMAC 1996 Influence of the Bearings Defects on the Dynamical Behavior of an Elastic Shaft Olivier Bonneau and Jean Frene 328
ISROMAC 1996 Analysis on the Coupled Vibration of Rotor and Casing of a Vertical Shaft Pump by Using Substructure Synthesis Method Shijie Guo, Masato Tano and Yoichi Kanemitsu 337
ISROMAC 1996 Torsional Vibration Analysis of Rotor System Using Modified Mass Matrix J.P. Hong and L.E. Barrett 347
ISROMAC 1996 PC-Based Simulation and Animation of Turbomachinery Vibration R.G. Kirk, K. V.S. Raju and K. Ramesh 357
ISROMAC 1996 Rotordynamics on the pc: Transient Analysis with ARDS David P. Fleming 307
ISROMAC 1996 Solid Particle Erosion Resistance and Fatigue Characteristics of Two Selected Thermal Spray Chromium Carbide Coatings JM Quets, RC. Tucker, Jr. and AA Ashary 376
ISROMAC 1996 Modeling of Compressor Performance Deterioration Due to Erosion A Hamed, W. Tabakoff and D. Singh 386
ISROMAC 1996 Advanced Compressor Loss Correlations, Part I : Theoretical Aspects M. T. Schobeiri 395
ISROMAC 1996 Advanced Compressor Loss Correlations, Part II : Experimental Verifications M. T. Schobeiri 410
ISROMAC 1996 Performance Assessment of Low Solidity Vaned Diffusers for Centrifugal Compressors Abraham Engeda 417
ISROMAC 1996 A Combined Experimental and 2-D Computational Study on Trailing Edge Ejection with Different Cooling Gases D. Bohn, V. Becker, K. Behnke and H. Schonenborn 427
ISROMAC 1996 The Effect of Tip Clearance on the Performance of a Centrifugal Impeller in the First and Third Quadrant Abraham Engeda 437
ISROMAC 1996 Erosion and Wear Characteristics of Submersible Pump Components by Sand Particles Jae-Keun Lee, Wam-Gyu Park, joo-Hong Park, Tae-Bin Lim, Tae-Lyong Song, Se-Min Oh, Duck-Hwan Kim and Soo-Kil Park 445
ISROMAC 1996 Development of an Off-Line Expert System for Condition Monitoring of an Aircraft Engine J.S. Roo, A Chawla and C. Dattagupta 455
ISROMAC 1996 Fault Diagnostics and Prognostics for Rotating Machinery KamW.Ng 464
ISROMAC 1996 An Assessment of Turbomachinery Condition Monitoring and Failure Prognosis Technology Henry C. Pusey and Thomas A Moran 472
ISROMAC 1996 Continuum Fatigue Damage Modeling for Critical Design, Control and Fault Prognosis Carl F. Lorenzo 482
ISROMAC 1996 Quantification of Gear Tooth Damage by Optimal Tracking of Vibration Signatures F .K. Choy, R.J. Veillette, V. Polyshchuk, M.J. Braun and R.C. Hendricks 503
ISROMAC 1996 Non-Linear Transient Analysis of Oil Ring Seals for High Pressure Centrifugal Compressors Using Finite Element Method S.K. Baheti and R.G. Kirk 514
ISROMAC 1996 Influence of Parameter Variation on Grooved Turbulent Pump Seal Characteristics P. Materny, R.G. Kirk and K. W. Wilkes 524
ISROMAC 1996 A Study on the Fluid Moment Characteristics of Pump Annular Seal Yuji Kanemori and T akuzo lwatsubo 532
ISROMAC 1996 Analysis of Seal Leakage Characteristics for High Speed Spindle Byung O Chul Na, Keyoung Jin Chun and Dong-Chul Han 542
ISROMAC 1996 Numerical Simulation of Flow in a Whirling Annular Seal and Comparison with Experiments MM. Athavale, R.C.Hendricks and BM Steinetz, 552
ISROMAC 1996 Lubrication Design of a Piston-Ring Pack Yeau-Ren jeng 563
ISROMAC 1996 The Improved Model for an Annular Honeycomb Seal Analysis Using a Two-Control Volume T.W. Ha and D.W. Childs 573
ISROMAC 1996 Lyapunov-Based Vibration Control for Unbalanced Rotor Systems with Magnetic Bearings Li-Farn Yang and Chin-Cheng Li 583
ISROMAC 1996 Equivalent Stiffness and Damping Coefficients of a Digitally Controlled Active Magnetic Bearing Jeong-Han Ko, Hyun-Seok Yang, Sang-Jo Lee and Young-Pil Park 593
ISROMAC 1996 A Hydrodynamic Bearing-Rotor System Controlled by Active Magnetic Bearing for Stability Improvement Sung-Cheon jung, Yoon Joung, Ki-Young Lee, In-Bae Chang and Dong-Chul Han 603
ISROMAC 1996 Novel Magnetic Bearings for a Flywheel Energy Storage System H. Ming Chen and James Walton 613
ISROMAC 1996 Navigational Instruments with Magnetically Suspended Inertial Masses Zdzislaw Gosiewski, Tomasz Grzegorczyk and Krzysztof Falkowski 622
ISROMAC 1996 Dynamic Characteristics of a Pad Journal Bearing Mel Human
ISROMAC 1996 Numerical Studies of the Flow in a Hydrostatic Pocket and its Feed Restrictor M.J. Braun and M. Dzodzo 640
ISROMAC 1996 A Comparison of Two and Three Dimensional Flow and Pressure Patterns in a Hydrostatic Journal Bearing Pocket M. Dzodzo and M.J. Braun 650
ISROMAC 1996 Dynamic Coefficients of Submerged Electro-Rheological Bingham-like Fluid Journal Bearing Siyoul Jang and John A. Tichy 659
ISROMAC 1996 Modelling of Oil Flow with Free Surface in the Oilwell Tube of Self-Contained Bearing Assemblies Y. Piao and K. Brockwell 669
ISROMAC 1996 Hydrodynamic Characteristics of Combination Pad Journal Bearings Dong Xu Li and Tom J. O\alko 679
ISROMAC 1996 Experimental Study on a Five-Pad Tilting Pad Journal Bearing Working in Laminar and Turbulent Regions Hyun Cheon Ha, Seong Heon Yang, Ho Jong Kim and Hyung Hyun Byun 688
ISROMAC 1996 A Design of High Speed Air Bearing Museok Song and Young-Ie Lee 695
ISROMAC 1996 Dynamic and Stability Analyses of Foil Journal Bearings Xu Shangxian and Wang Zhaowu 705
ISROMAC 1996 Life Prediction of the Machining Center Main Spindle Bearing with Preload Effect Pyung Hwang, Sung-In Kwon and Seung-Han Yang 710
ISROMAC 1996 Improvement of Stability of Rotor System by Introducing a Hydraulic Damper into an Active Journal Bearing J._. Krodkiewski, Y. Cen and L. Sun 719
ISROMAC 1996 Influence of Fluid Inertia Forces on the Response of Squeeze Film Damper Supported Rotors Meng Guang, Guo Ying-O\ao and E.J. Hahn 727
ISROMAC 1996 An Experimental Study on the Stiffness and Damping Coefficients of an Air Bearing Using Magnetic Exciter Jun-Ho Choi, Sang-Shin Park and Dong-Chul Han 736
ISROMAC 1996 The Limit Cycle Characteristics Analysis of Oil Film Instability Whirl with Hopf Bifurcation Method Cheng-Song Chang and Hua-Ping Mu 745
ISROMAC 1996 Measurement of Radial Error Motions in a Precision Air Spindle Sang-Shin Park, II-Hae Kim and Dong-Glul Han. 753
ISROMAC 1996 Effects of System Rotation on Turbulence Structure -A Review Relevant to Turbomachinery Flows - James P. Johnston 1
ISROMAC 1996 Performance of an Axial-Flow Pump Stage with Outlet Guide Vanes of Variable Geometry G. Ebinger and HE Siekmann 18
ISROMAC 1996 Experimental Investigation of Rotor-Stator-Interaction in Axial-Flow Turbines and Compressors Heinz E. Gallus 28
ISROMAC 1996 Navier-Stokes Computations of Non-Isothermal Flow and Heat Transfer between Counter-Rotating Disks C.Y. Soong and Ch Chyuan 39
ISROMAC 1996 Measurement and Prediction of Square Sectioned Rotating 00° Curved Duct Flow by Coriolis- Modified Low Reynolds Number Second Moment Closure Young Don Choi, Gun Hyee Lee and Jong Kun Shin 47
ISROMAC 1996 Onset of Cavitation in Oil Flow through a Rotating Shaft with Twin Branches Sun-Wen Cheng and Wen-lei Yang 57
ISROMAC 1996 Vortex Breakdown in a Differentially Rotating Cylindrical Container Kazuyuki Fujimura, Hide S. Koyama, Jae Min Hyun 67
ISROMAC 1996 Axisymmetric Vortex Breakdown in a Container With a Rotating Cone Jae Won Kim, Jae Min Hyun 77
ISROMAC 1996 Swirling Flow Field inside a Hollow Turbine Shaft for an Internal Cooling Air System Tadaharu Kishibe, Shojiro Kaji 85
ISROMAC 1996 Axial Compressor Stall and Surge Prediction by Measurements H. Honen 95
ISROMAC 1996 Multiply Connected Cavity Flows in Turbomachines Rc. Hendricks, MM. Athavale, YH 1-10, JM. Forry, BM. Steinetz, K.R. Csavina 104
ISROMAC 1996 Performance Predictions of VA WTS with NLF Airfoil Blades OIristian Masson, OIristophe Leclerc and Ion Paraschivoiu 113
ISROMAC 1996 Distorted Inlet Flow Propagation in Axial Compressors JH Kim, F.E. Marble and c.-J. Kim 123
ISROMAC 1996 Laser Velocimetry Measurements in a Double Volute Centrifugal Pump William deOjeda, Ronald D. Flack and Steven M. Miner 131
ISROMAC 1996 Low Reynolds Number Turbine Blade Cascade Calculations Richard Rivir, Rolf Sondergaard, Michael Dahlstrom and Elizabeth Ervin 132
ISROMAC 1996 Leakage & Diffuser Flow Investigation of the Flow in Pelton Turbines and the Influence of the Casing Heinz-Bernd Matthias, Josef Prost and Christian Rossegger 142
ISROMAC 1996 Measurement of the Flow in the Backshroud/Casing Clearance of a Precessing Centrifugal Impeller Yoshiki Yoshida, Akira Saito, Shin Ishizaki, Yoshinobu Tsujimolo and Hideo Ohashi 151
ISROMAC 1996 Computational Analysis of Transonic Flows in Centrifugal Compressor Diffusers Using Upwind Navier-Stokes Method Dong Joo Song, Gee Bum Kwon and Shin Hyoung Kang 161
ISROMAC 1996 Flow Calculation of a Steam Turbine Last Stage with Diffuser J. Kruckels, R. Merz, JF. Mayer and H. Stetter 170
ISROMAC 1996 Flow Characteristics in a Diffuser with Various Profiles of Inlet Velocity Yang-Duck Lee and Jae-Heon Lee 180
ISROMAC 1996 Computational and Experimental Investigations on the Flow through an Axial Flow Fan Kwang-Yong Kim, Xi Chen, Jung-Yup Kim, Duck-Soo OIung and Seong-lim Hong 190
ISROMAC 1996 Effects of Operating Conditions on the Flow in the Moving Blade Passage of a Single Stage Axial-Flow Fan Tsutomu Adachi, Minoru Yamashita, Kennicl1iro Yasuhara and Tastsuo Kawai 199
ISROMAC 1996 LDA Measurement and Calculation in a Small Axial Fan H.S. Rew, SH Kim, Y.G. lung, c.J. Kim and J.E. OIa 209
ISROMAC 1996 An Experimental Study on the Noise Reduction of Regenerative Pump Sung-Bin lee, Sung-Bae Song, Sung-il Park and Dong-Ick _ 219
ISROMAC 1996 Three-Dimensional Flow Patterns in a Pump Volute at Nominal and Off-Design Flow Conditions by LDA Measurements Gabriel Dan Ciocan, Andre luiz Amarante Iv'tesquita and Jean louis Kueny 229
ISROMAC 1996 CFD : Rotor-Stator Interaction & Multistage Flow Analysis of Unsteady Transonic Stator/Rotor Interaction Using Patched and Chimera Grid System Sun- T ae Kim and Dong-Ho lee 238
ISROMAC 1996 Rotor-Stator Interaction in Hydraulic Machinery N. Riedel, T.Aschenbrenner and R Schilling 248
ISROMAC 1996 Unsteady Incompressible Turbulent Flow Simulation of the Rotor-Stator Configuration W.G. Park, H.W. Kim, Y.R. Jung, K.S. Kim and ED. Park 257
ISROMAC 1996 Numerical Analysis of Viscous Flow through Single Stage Turbine E.YK Ng and Miao Yi 268
ISROMAC 1996 The Flow Analysis of a Three-Dimensional Multistage Turbomachinery Blade Design Shih H. Chen 277
ISROMAC 1996 Multistage Analysis of the Titan IV Stage I Engine Turbine Flow Path Using 3-D Navier-Stokes Computational Fluid Dynamics RJ. Blumenthal and P.F. Galpin 287
ISROMAC 1996 Simulation of Three-Dimensional Viscous Flow in a Three-Stage Steam Turbine with Tip Leakage ROdiger Merz, JOrg KrOckels, JOrgen F. Mayer and Heinz Stetter 297
ISROMAC 1996 Calculation of Secondary Flow in a Centrifugal Pump Using 3D Viscous Flow Computation Techniques K. Majidi and HE Siekmann 306
ISROMAC 1996 Incompressible Three-Dimensional Euler Computation of the Flow Inside a Spatial Centrifugal Pump with Splitters Including Loss Effects EM. El Chazzani, AR. Ridwan, G. Bois, Ph. Geai and JM. Sannino 317
ISROMAC 1996 Application of Through-Flow Calculation to Design and Performance Prediction of Centrifugal Compressor Shin-Hyoung Kang and Young-Seck Choi 326
ISROMAC 1996 3-D Viscous Flow Analysis of an Axial Flow Pump Impeller Steven M. Miner 336
ISROMAC 1996 Numerical Flow Analysis in a Centrifugal Pump for Optimization of the Casing with Regard to Hydraulic Efficiency and Bearing Forces A Kaps and HE. Siekmann 345
ISROMAC 1996 Evaluation of Acoustic Flutter Suppression in Transonic Cascade Flows Pong-leu Lu, Sen-Kuei Chen and Ron-Ho Ni 355
ISROMAC 1996 An Analysis of 2-D Transonic Cascade Flow Using the k-(J Turbulence Model with Explicit-Implicit Solver Chang Ho alOi and Jung Yul Yoo 365
ISROMAC 1996 Numerical Simulation of the Three-Dimensional Turbulent Flow in a Turbine Rotor with Conical Walls Volker Amedick and Heribert Simon 375
ISROMAC 1996 An Improved Flux Vector Splitting Implicit Method for Solving the Inviscid and Viscous Internal Flows E.Y.K. Ng and S.l. Liu 385
ISROMAC 1996 Interactive Grid Generation System for Turbomachinery Cascade Design Procedure Hee- T aeg Chung 396
ISROMAC 1996 Numerical Analysis of Transonic Turbine Cascade and Off-Design Characteristics Yi Liu and Bin Liu 406
ISROMAC 1996 Flow Regimes in Film Condensation in a Horizontal, Slowly Rotating Cylinder Koichi Mizukami, Noriyuki Sebe, Fumiaki Abe, Shi-Wen Peng and Miao-Kun Zhong 414
ISROMAC 1996 Experimental Study on Convective Heat Transfer of Inward Air Flow in Rotating Multi-Channels G]. Hwang, C.R. Kuo and C.Y. Chang 422
ISROMAC 1996 Unsteady Convection in a Rotating Concentric Drum with Inner Surface Heating Hiroshi Ohue, Wen-lei Yang and Genshi Kawashima 431
ISROMAC 1996 Freezing in Turbulent Flow inside an Axially Rotating Pipe at Low Flow-Rate Reynolds Numbers K. - J. Rinck and H. Beer 440
ISROMAC 1996 Local Heat Transfer in Rotating Cavities with Radial Outflow of Cooling Air H. Saitoh, S. Mochizuki, A Murata, H. Saito, A T ateno 450
ISROMAC 1996 Numerical Study for Optimizing Heat Transfer in a High Speed Rotating Components S. Wittig, S. Kim, T. Scherer and I. Weissert 460
ISROMAC 1996 Heat Transfer in an Electromagnetic Bearing GF. Jones and C. Nataraj 470
ISROMAC 1996 Two-Phase Air/Oil F1ow in Aero Engine Bearing Chambers-Assessment of an Analytical Prediction Method for the Internal Wall Heat Transfer A Glahn and S. Wittig 481
ISROMAC 1996 An Analysis of the External Cooling of an Electro-Rheological Cylindrical Clutch Raymond Smyth 491
ISROMAC 1996 Experimental Study of Heat Transfer on Rotating Roll Cooled by Water Nozzles Miroslav Raudensky, Jaroslav Horsky, Jiri Krejsa and Ampere A. Tseng 501
ISROMAC 1996 Effect of a Single Oblique Pin Fin on Endwall Heat Transfer Ryosuke Matsumoto, Shinzo Kikkawa, Mamoru Senda and Masayuki Suzuki 509
ISROMAC 1996 Turbulent Heat Transfer and Friction in a Passage Disturbed by Detached Permeable Ribs of Different Heights Tong-Miin Liou, Yuan-Jen Chang and Shih-Hui Chen 519
ISROMAC 1996 Experiments of the Interaction between Water Sprays and Fire Plumes Myung Boo Kim, Yong Jae Jang and Jin Kook Kim 529
ISROMAC 1996 Performance Investigation into Leaned and Twisted Blades Dongmei Zhou, Zhigang Zhang, Xiaoshen Ye and Zeying Peng 537
ISROMAC 1996 Numerical Study of Jet Impingement for Turbine Blade Cooling Shin-II Kim, Young-Ki Choi, Hong-Sun Ryou and Jung-Hee Lee 543
ISROMAC 1996 Local Heat Transfer. Coefficient Distributions under an Array of Impinging Jets Using a Transient Liquid Crystal Technique Yizhe Huang, Srinath V. Ekkad and Je-Chin Han 553
ISROMAC 1996 Analysis of the Gas Turbine Cooled Moving Blade G. Urquiza B., JoA Kubiak, A Camero P., JoA Lopez R. and A. Garcia A. 563
ISROMAC 1996 Effect of Periodic Passing Wake on the Film Coolant Flow over a Flat Plate Keon Kuk, Joon Sik Lee, Sung Tack Ro and Woo II Lee 573
ISROMAC 1996 Development of a Telemetry System to Measure Convective Heat Transfer Coefficient of a Rotating Body Kyoung-Pyo Ha. Myoung Keun Yoon and S. Ken Kauh 580
ISROMAC 1996 Hydraulic Machines Process Control and Simulation MA Rayan, N.H. Mostafa and R.N. Azoole 590
ISROMAC 1996 Blade Row Interaction Tone Generation and Active Control Sanford Fleeter 600
ISROMAC 1996 Numerical Study of the Dynamic Characteristics of Steam Turbine Speed Governing System Yi-Ping Dai and Mao-Zheng Yu 609
ISROMAC 1996 Numerical Heat Transfer in a Gradually Expanding Nozzle with Radiation Effect Seung-Wook Baek and Man-Young Kim 617
ISROMAC 1996 The Effects of a T-Type Baffle- Nozzle in a Developing Free Jet Young Sang Kim, jae Wook Rvu, Young Ho Shin, Ho Dong Park and Tae Won Sea 625
ISROMAC 1996 Flow Pattern and Characteristics on Main Nozzle of Air Jet Loom Deddy Setya Yudha, T akao Sasayama, Katsumi Aoki and Masamori lida 635
ISROMAC 1996 Spray Characteristics of a Pilot Nozzle in a Counter-Swirl Type Gas Turbine Combustor Young-Sung Ko, Suk Ho Omng, Myoung-Hwan Kim, Dong-jin Kim and Dae-Ki Min 644
ISROMAC 1996 Visualization of Flow Patterns in a 9O-Degree Sharp Turn of a Square Duct K.c. Cheng and l. Shi 651
ISROMAC 1996 The Flow Characteristic and the Mechanism of Circular Cylinder with Grooves Kouichi Ishibashi and Katsumi Aoki 661
ISROMAC 1996 An Aerodynamic Method for the Analysis of Wind Farms of Dense Cluster Arrangements Christian Masson, Idriss Ammara and Ion Paraschivoiu 670
ISROMAC 1996 Flow Characteristics of Non-Newtonian Fluids in the Stenotic and Bifurcated Tubes Sang-Sin Yoo and Sang-Ho Suh 680
ISROMAC 1996 Variational Finite Element Method for the Design of 2-D and Axisymmetric Wind Tunnel Contractions He Hong and Gao-lian liu 690
ISROMAC 1996 Flow Resistance Coefficient Values for Perlorated Plates in Low Reynolds Number Ranges Masaru Ishizuka 696
ISROMAC 1996 Numerical Analysis of Heat Transport in Thermal Entrance Region of Turbulent Parallel Couette Flows in Concentric Annuli Shuichi Torii and Wen-lei Yang 706
ISROMAC 1996 Thermal Analysis of Compact Electronic Equipment Katsumi Hisano, Hideo Iwasaki and Masaru Ishizuka 716
ISROMAC 1996 On the Characteristics of the Thermal Behavior of a High Speed Machine Tool Spindle T ae- Jo Ko, Pyung Hwang, Hee-Sool Kim and Sun-Ho Kim 726
ISROMAC 1996 State of Resin Heated in Barrel of Injection Molding Machine and Its Moldings Quality Nobuhiko Nishiwaki, Masaaki Konno, Ailing Cui, Sankei Hori and Sadanari Mochizuki 735
ISROMAC 1996 Transient Heat Transfer Analysis in Vacuum Furnace by Radiant Tube Burners A Mochida, K. Kudo, Y. Mizutani, M. Hattori and Y. Nakamura 742
ISROMAC 1998 Blade and Rotor Bearing Failures - The Role of State of Art Multifaceted Technologies in Investigations of a Nuclear Power Plant Accident J. S. Rao 1
ISROMAC 1998 Active Removal of Hydrodynamic Instabilities in Partially Filled Centrifuges H Ulbrich, G. Ahaus, A. Cyllik, and C. Zhu 20
ISROMAC 1998 Dynamic Behavior of a Rigid Shaft Mounted in an Active Bearing 0. Bonneau, E. Lecoutre, and J. Frene 30
ISROMAC 1998 Vibration Criteria Considered From Case Studies of Active Magnetic Bearing Equipped Rotating Machines 0. Matsushita, Y. Kanemitsu, T. Azuma, and Y. Fukushima 38
ISROMAC 1998 Numerical Simulation of the Dynamic Behaviour of Rotors on Active Magnetic Bearings C. Delprete, G. Genta, and A. Repaci 48
ISROMAC 1998 FEM Based Controller Design for Active Magnetic Bearings in Hard Disk Drives A. Argondizza, B. Aeschlimann, H Bleuler, S. Carabelli, G. Genta, M Kuemmerle, R. Mueller, and A. Tonoli 58
ISROMAC 1998 Dry Chlorine Centrifugal Compressor on Active Magnetic Bearings A. Argondizza, S. Carabelli, C. Delprete, and G, Genta 68
ISROMAC 1998 Motion Analysis During Rotor Drop in Active Magnetic Bearing Machinery F. Vatta and A. Vigliani 78
ISROMAC 1998 Critical Speed Analysis of Fiber Reinforced Composite Rotor Embedded With Shape Memory Alloy Wires K. Gupta 86
ISROMAC 1998 Stresses in Composite Shafts Subjected to Unbalance Excitation and Transmitted Torque H B. H Gubran, S. P. Singh, and K. Gupta 96
ISROMAC 1998 Dynamic and Thermal Characteristics of Rotors Made of Carbon Fiber Epoxy Composite Materials J. K. Choi, D. G. Lee, and K. HAhn 106
ISROMAC 1998 Semi-Active Stability Control of Shape Memory Alloy Hybrid Composite Shaft A. Tylikowski 116
ISROMAC 1998 Use of Directional Wigner Distribution for Identification of the Instantaneous Whirling Orbit in Rotating Machinery C. W Lee and Y. S. Han 126
ISROMAC 1998 Vibration Monitoring of Non-Stationary Rotor Systems J. Strackeljan and D. Behr 135
ISROMAC 1998 Condition Monitoring and Fault Diagnosis of Rotating Machinery Based on Neural Networks L. Rajamani and R. Dattagupta 145
ISROMAC 1998 Complex Harmonics - a New Concept for Vibration Signature Analysis and Fault Diagnosis of Rotors J. Chen and P. Yan 155
ISROMAC 1998 Rotation-Synchronous Detection and Characterization of Mechanical Sources of Current Distortion in Electric AC Machines Using Wavelet Transform A. M Trzynadlowski, R. L. Kirlin, and R.M Dizaji 163
ISROMAC 1998 Comparison Between Probability and Wavelet Analysis in Bearing Failure Detection H R. Martin and S. Ziaei 170
ISROMAC 1998 Diagnosis of State Cycles for Power Plants With the Program MultiFUN Applied to a Typical Operational Coal Power Plant F W Fuchs and H Stetter 180
ISROMAC 1998 Experience in Neural Network Application to Thermal Diagnostics in Power Engineering J. Krzyzanowski and J. Ghuch 192
ISROMAC 1998 Dynamic Stability of Rotor-Bearing Systems With Internal Damping L. Forrai 202
ISROMAC 1998 Simulation Methods in Acquisition of Diagnostic Relations J. Kicinski, R. Drozdowski, and P. Materny 210
ISROMAC 1998 Effectiveness of Monitoring of the Thermodynamic Cycle of a Gas Turbine Engine in Ship's Energy Systems A. Adamkiewicz 220
ISROMAC 1998 Use of Non-Linear Effects in Vibroacoustic Diagnosis Z. Dabrowski and J. Gardulski 230
ISROMAC 1998 Vibration Control of a Pressurized, Sealed, Electro-Rheological Fluid Squeeze-Film Damper Supported Rotor C. H Kim, N S. Lee, Y. B. Lee, and D. H Choi 238
ISROMAC 1998 Stability Analysis of a Gear Pair System Supported by Squeeze-Film Dampers T. N Shiau, J. R. Chang, and S. T. Choi 248
ISROMAC 1998 Time Domain Study of the Dynamic Stressing of Crankshafts G. Genta and S. Zanolli 258
ISROMAC 1998 Transformation of Gear Inter Teeth Forces Into Acceleration and Velocity W Bartelmus 268
ISROMAC 1998 Identification of Stiffness Reduction in the System of Steam Turbine Generator Sets by Application of Modal Test Under Conditions in Situations S. Gajin, S. B. Kuzmanovic, and J Maricic 278
ISROMAC 1998 Experimental Modal Analysis - A Tool for Unbalance Identification of Rotating Machines, H Irretier and T. Kreuzinger-Janik 286
ISROMAC 1998 Numerical and Experimental Investigations of Coupling Effects in Anisotropic Elastic Rotors H Irretier, F Reuter, and G. Jacquet-Richardet 296
ISROMAC 1998 Destabilizing Effect of Aerodynamic Forces in Centrifugal Compressors, D. E. Bently and P. Goldman 306
ISROMAC 1998 Optimal Geometry for Journal Bearings K. Matsuda, Y. Kanemitsu, and S. Kijimoto 317
ISROMAC 1998 Wave Bearing Technology to Control Journal Bearing Dynamics, F Dimofte and T. G. Keith 327
ISROMAC 1998 Dynamic Characteristics of the 3-Lobe Journal Bearing With the Different Length of Lobes S. Strzelecki 337
ISROMAC 1998 Effect of Misalignment on the Spring and Damping Coefficients of the 2-Lobe Journal Bearing S. Strzelecki and W Litwicki 346
ISROMAC 1998 Monitoring and Mechanical Fault Diagnosis on Large Turbomachinery in Power Industry - Field Case Histories P. Tirinda 354
ISROMAC 1998 An Introduction to the Condition Monitoring, Analysis and Diagnosis System of a 300MW Pumped Storage Power Unit C. S. Chang, W Zhang, X Y. Yang, and F L. Chu 363
ISROMAC 1998 Mechanical Behavior of an Industrial Gas Turbine Under Fault Conditions, a Case History S. S. Florjancic, N Lively, and R. Thomas 373
ISROMAC 1998 Vibrational Diagnostic of Rotating Machinery in Power Plants U Sudmersen, D. Stegemann, W Reimche, and Y. Liu 383
ISROMAC 1998 Diagnosis and Solution of the Exciter Rotor Vibration Problem Z. Racic, B. Sun and N Boyle 394
ISROMAC 1998 Development of Condition Assessment Methodology for High Pressure Boiler Feed Pumps K. Ramakrishna and T. Chander 399
ISROMAC 1998 Strength Analysis and Accidents of Shaft Destruction Under Nonlinear Vibration With Large Unbalance of Turbogenerator Rotor Systems S. Lu 407
ISROMAC 1998 Numerical and Experimental Study on Impeller Failure S. P. Lee, C. O. Ahn, H S. Rew, S, C. Park, and D. I Rhee 415
ISROMAC 1998 Miniature Instrumentation for Troubleshooting in Rotating Machinery Applications J Rosinski and D. A. Hofmann 423
ISROMAC 1998 Diagnostics and Catastrophic Fracture Protection of Rotating Machinery R.S. Trofimov and N A. Makhutov 432
ISROMAC 1998 Simulations on Torsional Vibration of Rotors Based on Four-Terminal Network Model and Mechanical Impedance Method Y. Gu, K. Yang, and C. He 446
ISROMAC 1998 Evaluation of Tapered Lagrangian Finite Elements for Torsional Vibration Analysis of Rotor Systems J. R. Baker and K. E. Rouch 452
ISROMAC 1998 On a Discrete-Continuous Modeling of the Rotor Systems for an Analysis of Coupled Flexural-Torsional Vibrations T. Szolc 462
ISROMAC 1998 Modeling of Tilting-Pad Journal Bearings With Transfer Functions J A. Vazquez and L. E. Barrett . 472
ISROMAC 1998 Dynamic Behaviour of an Unloaded Rotor in Tilting Pad Journal Bearings R. Brancati, S. Pagano, E. Rocca, M Russo, and R. Russo 482
ISROMAC 1998 Experimental Investigations on Tilting Pad Journal Bearings R. Brancati, S. Pagano, E. Rocca, M Russo, and R. Russo 491
ISROMAC 1998 Diagnosing the Mechanical Faults of High Speed Rotating Machinery by Means of Process Identification Z. Fang, S. Fu, F. Chu, and Z. Zhang 501
ISROMAC 1998 Detection of Mechanical Abnormalities in Induction Motors by Electric Measurements A. M Trzynadlowski 506
ISROMAC 1998 Nonlinear-Characteristics Tracking to Improve Rotating Machinery Monitoring and Diagnostics G. A. Horattas and M L. Adams 516
ISROMAC 1998 Measurement of Absolute Vibration of Rotating Shaft X Yang, P. Yan, and L. Mao 527
ISROMAC 1998 A New Approach to Assess the Quality of Small High-Speed Centrifugal Fans Using Noise Measurement D. Cui and 1 A. Craighead 532
ISROMAC 1998 Application of Fast Prototyping Method Into the New, Real-Time Runout Elimination Algorithm W Batko and M Petko 539
ISROMAC 1998 Integrated Diagnostics and Prognostics of Rotating Machinery K. W Ng 547
ISROMAC 1998 An Efficient Method of Vibration Diagnostics for Rotating Machinery, Using a Decision Tree H J Kim, C. H Park, and B. S. Yang 552
ISROMAC 1998 Advanced Techniques for Use in Rotating Machinery Diagnostics and Prognostics E. A. Jesse 562
ISROMAC 1998 The Importance of Engine External's Health B. L. Stoner 572
ISROMAC 1998 Linearized Approach of Fluid-Structure Vibrations in Cyclic Symmetric Domains B. Lalanne and M Touratier 581
ISROMAC 1998 On the Forced Response of Harmonically and Partially Mistuned Bladed Disks - Part I: Harmonic Mistuning M P. Mignolet, W Hu, and 1 Jadic 591
ISROMAC 1998 On the Forced Response of Harmonically and Partially Mistuned Bladed Disks - Part II: Partial Mistuning and Applications M P. Mignolet, W Hu, and 1 Jadic 603
ISROMAC 1998 Transient Excitation of 2-Bladed Assembly J F Bratt 614
ISROMAC 1998 Three-Dimensional Vibration of Bladed Disk Assemblies With Friction Dampers W Sextro, K. Popp, and 1 Wolter 621
ISROMAC 1998 Stability of Rotating Pretwisted, Tapered Beams With Randomly Varying Speeds T H Young and T M Lin 631
ISROMAC 1998 Forced Vibration of Mistuned Steam Turbine Bladed Discs - The 3D-Unsteady Aerodynamic Forces R. Rzadkowski and V Gnesin 641
ISROMAC 1998 Aeroelasticity in Turbomachines: Effect of Coupling Modeling and Blade Material Changes F. Moyroud, G. Jacquet-Richardet, and T H Fransson 654
ISROMAC 1998 Nonlinear Blade Vibration and Flutter in Transonic Rotors O. O. Bendiksen 664
ISROMAC 1998 Application of Local Stress-Strain Approach to Predict Fracture Initiation of a Francis Turbine Runner Blade J. S. Rao, P.K. Nimbekar, R. Misra, and A. K. Singh 674
ISROMAC 1998 Optimum Shape Design of Rotor Shafts Using Genetic Algorithm B. G. Choi and B. S. Yang 687
ISROMAC 1998 Revisiting Rotor Rigid Body Modes: Parametric Study of Stability N B. Littrell, A. Muszynska, and P. Goldman 697
ISROMAC 1998 On the Identification of a Flexibly Supported Rigid Foundation With Unknown Location of the Principal Axes of Inertia N S. Feng and E. J. Hahn 705
ISROMAC 1998 The Identification of Foundation Vibration Parameters From Running Machine Data A. W. Lees, M I Friswell, M G. Smart, and U Prells 715
ISROMAC 1998 Modelling of a Rotor System Inaccuracies J. M Krodkiewski 725
ISROMAC 1998 Considerations in High-Speed Tilting-Pad Journal Bearings of Unspecific Geometry D. Sarbu 735
ISROMAC 1998 Effect of Offset Angle of Tilting Pad Bearing on Unbalance Response of a Jeffcott Rotor Y. Kanemitsu, S. Kijimoto, K. Matsuda, and H Hiyama 745
ISROMAC 1998 Turbulent Effects on Static and Dynamic Performance of a Tilting Pad Journal Bearing H C. Ha and K. W. Kim 755
ISROMAC 1998 Transient Vibrations of Elastic Rotors in Retainer Bearings R. Markert and G. Wegener 764
ISROMAC 1998 Transition to Fluid-Induced Limit Cycle Self-Excited Vibrations of a Rotor and Instability Threshold Hysteresis A. Muszynska 775
ISROMAC 1998 Self-Synchronization and Automatic Balancing in Rotor Dynamics J. Sperling, F Merten, and H Duckstein 785
ISROMAC 1998 Flutter Control of Shafts Utilizing SMA Layers W Kurnik 795
ISROMAC 1998 Parametrical Vibration of Flexibly Supported Rotary Machines 0. Zahorec, M Musil, and P. Besztos 805
ISROMAC 1998 Diagnostics of Bladed Diaphragm Technical Condition in Steam Turbines Z. Orlowski and T GaIka 815
ISROMAC 1998 Experimental Diagnostics of Naval Gas Turbines A. Charchalis 824
ISROMAC 1998 Diagnostic Identification of Machines B. oltowski 832
ISROMAC 1998 Rotating Brush Seal S. B. Lattime, M J. Braun, F K. Choy, R. C. Hendricks, and B. M Steinetz 841
ISROMAC 1998 Bidirectional Brush Seals - Post-Test Analysis R. C. Hendricks, J. Wilson, T Y. Wu, R. Flower, and R. L. Mullen 851
ISROMAC 1998 Theoretical Rotordynamic Coefficients of Labyrinth Gas Seals: a Parametric Study on a Bulk Model P. Forte and F. Latini 861
ISROMAC 1998 Calculation of Rotor Dynamic Coefficients for Labyrinth Seals B. P. Williams and R. D. Flack 871
ISROMAC 1998 An Experimental Investigation of a Spherical Journal Bearing I. A. Craighead 881
ISROMAC 1998 Dynamic Analysis of Engine Bearings H. Hirani, K Athre, and S. Biswas 889
ISROMAC 1998 Equations of Motion and Stability of a Rotor Supported on Pericycloidal Journal Bearings Z. Osinski and Z. Starczewski 899
ISROMAC 1998 Spring and Damping Coefficients of Hyperboloidal Journal Bearing With Adiabatic Oil Film J. Burcan and S. Strzelecki 910
ISROMAC 1998 SSME HPOTP LOX Hydrostatic Bearing Development Over Wide Thrust Range R, F Beatty and S, A, Nolan 920
ISROMAC 1998 A Time Integration Algorithm for Nonlinear Rotordynamic Systems With Time-Varying Parameters H J. Holl, A, K Belyaev, and H Irschik 930
ISROMAC 1998 Numerical Simulation of Dynamic Properties of Nonlinear Rotor Systems of Aircraft Jet Engines J. Kamenicky, E. Malenovsky, and J. Zapomel 941
ISROMAC 1998 A Study of the Use of the Correlation Dimension to Monitor a Nonlinear Rotor/Stator System C. Craig, R. D, Neilson, and J. Penman 950
ISROMAC 1998 Nonlinear Dynamic Analysis of a Rigid Rotor Supported on a Deep Groove Ball Bearing M Tiwari, K Gupta, and O. Prakash 960
ISROMAC 1998 Mode-Locked Motion and Chaos of Rotors Mounting on Nonlinear Bearings Y. Kang, S. C. Jen, p, p, Sheu, and S. H Tu 970
ISROMAC 1998 Higher-Order Spectral Technique for Failure Identification in Rotating Machinery S, Radkowski and A, Wilk 977
ISROMAC 1998 Experimental Investigation Concerning a Few Measurement Aspects of Lateral and Torsional Vibrations in Turbomachinery Z. Kozanecki, D. Kozanecka and T. Lech 987
ISROMAC 1998 Some Practical Aspects of the Processing of Data From Diagnostic Monitoring of Machinery J. Kazmierczak 994
ISROMAC 1998 Dynamic Simulation of a Multi-Bearing Rotor System Considering Disk Flexibility H S. Jia and H Lee 1004
ISROMAC 1998 Dynamic Model Reduction of Large Rotor Shafts N Zhang 1014
ISROMAC 1998 On the Eigenvalue Analysis of Anisotropic Rotor-Bearing Systems by Dynamic Stiffness Matrix Method T. Yang and S. C. Lu 1022
ISROMAC 1998 Modelling of Shaft Whirl With 3-D Solid Finite Elements J. Yu, A. Craggs, and A. Mioduchowski 1032
ISROMAC 1998 Rotordynamics on the PC: Further Capabilities of ARDS D. P. Fleming 1042
ISROMAC 1998 Vibration Analysis of a Rotor System Using a Modified Transfer Matrix Method Y. H Lee, S. H Choi, J. P. Hong, and D. C. Han 1052
ISROMAC 1998 The Dynamics of Rotor With Rubbing J. T. Sawicki, J. Padovan, and R. AI-Khatib 1059
ISROMAC 1998 Thermal Bending of the Rotor Due to Rotor-to-Stator Rub P. Goldman, A. Muszynska and D. E. Bently . 1069
ISROMAC 1998 Vibration Features on Rubbing Between Rotor and Casing for a Dual-Shaft Aeroengine L. T. Yan, D. Y. Wang, and Q. H Li 1079
ISROMAC 1998 High Vibration of a 125MW Steam Turbine During Run-up and Coast Down W K. Chu 1085
ISROMAC 1998 Friction-Related Vibration of Turbine Generator Unit in Operation X Huang 1093
ISROMAC 2000 Experimental Validation of Theoretical Models for the Linear and Nonlinear Vibrations of Immersed Rotors M. Moreira, A. Tissot, and J. Antunes 857
ISROMAC 2000 Rotating Shafts: Application of Dynamic Coefficients According to Warner's Theory F. Vatta and A. Vigliani 866
ISROMAC 2000 Further Studies on the Computation of Stiffness Effects of Irregular Rotating Discs Using Strain Energy R. Subbiah and D. Howard 872
ISROMAC 2000 Stability Analysis of a Symmetrical rotor Partially Filled With a Viscous Incompressible Fluid Zhu Changsheng 880
ISROMAC 2000 Stabilization of Centrifuges With Instabilities Due to Fluid-Structure Interactions: Various Control Approaches Heinz Ulbrich, Adrian Gyllik, and Guido Ahaus 886
ISROMAC 2000 On the Dynamics of Chatter Vibrations in External Cylindrical Grinding Oliver Schuette and Bodo Heimann 893
ISROMAC 2000 Model Based Fault Identification in Rotor Systems by least Squares Fitting R. Markert, R. Platz, andM. Siedler 901
ISROMAC 2000 Generalised Stiffness and Damping Characteristics of Lubrication to Structure Interactions Helmut Springer 908
ISROMAC 2000 Engine Simulation on a Testbed - a Rotordynamic Approach K.-H. Becker 916
ISROMAC 2000 Unbalance Vibration Control for High Order Bending Critical Speeds of Flexible Rotor Supported by Active Magnetic Bearing Makoto Itou, Osami Matsushita, Hiroki Okubo and Hiroyuki Fujiwara 923
ISROMAC 2000 Investigation of the Behavior of the Central Balancing Device in High Pressure Boiler Feed Pumps C. Trautmann and D.-H. Hellmann 930
ISROMAC 2000 Numerical Performance Prediction Procedure for Automotive Torque Converter Chinwon Lee, Wook Jin Jang, Jang Moo Lee, and Won Sik Lim 935
ISROMAC 2000 Identification of the Dynamic Characteristics of Turbulent Journal Bearings E. Knopf and R. Nordmann 940
ISROMAC 2000 On the Contact Between Rotor and Stator in an Ultrasonic Traveling Wave Motor Thomas Sattel and Peter Hagedorn 948
ISROMAC 2000 Dynamic Modeling of Engine Crankshaft H. Hirani 956
ISROMAC 2000 Composite Shaft Optimization Using Simulated Annealing Part I: Natural Frequency H.B.H. Gubran and K. Gupta 962
ISROMAC 2000 Composite Shaft Optimization Using Simulated Annealing Part II: Strength and Stresses H.B.H. Gubran and K. Gupta 970
ISROMAC 2000 An Explicit Beam Element for Non-Symmetric Thin-Walled Composite Shafts Hakan L. Wettergren 978
ISROMAC 2000 A Three Dimensional Modeling of the Dynamic Behavior of Composite Rotors G. Jacquet-Richardet, E. Chatelet, and D. Lornage 988
ISROMAC 2000 Full Annular Rub in Mechanical Seals, Part 1: Experiment Results Donald E. Bently, John J. Yu, and Paul Goldman 995
ISROMAC 2000 Full Annular Rub in Mechanical Seals, Part II: Analytical Study Donald E Bently, Paul Goldman, and John J. Yu 1003
ISROMAC 2000 An Investigation of Friction Coefficients for Labyrinth Gas Seals Paola Forte and Fabio Latini 1011
ISROMAC 2000 Wave Fluid Film Bearing Tests for an Aviation Gearbox Florin Dimofte, Margaret P. Proctor, David P. Fleming, and Theo G. Keith, Jr. 1017
ISROMAC 2000 Sealing Improvements on Leakage Flow of Oil Mist Lubrication Byung Chul Na, Keyoung Jin Chun, and Dong-Chul Han 1024
ISROMAC 2000 Predicted Geometry Effects of Oil Vapor Flow Through Buffer-Gas Labyrinth Seals S.Y. ParkandD.L. Rhode 1032
ISROMAC 2000 Experimental Flow Patterns and Pressure Characteristics in a Single Hydrostatic Pocket of Variable Depth M.J. Braun, C. C. Daniels, D. P. Peloso, and R. C. Hendricks 1041
ISROMAC 2000 Comparison of the Flow Inside Whirling and Non-Whirling Smooth Annular seals at 50% Eccentricity Gerald L. Morrison, Mark C. Johnson, and H. David Thames III 1049
ISROMAC 2000 A Comparison of Different Methods for Transverse Crack Modelling in Rotor Systems N. Bachschmid, A. Vania, and S. Audebert 1057
ISROMAC 2000 Identification of Transverse Cracks in Rotor Systems N. Bachschmid, P. Pennacchi, E.Tanzi, and S. Audebert 1065
ISROMAC 2000 Test Devices for Rotating Microactuators W. Brenner, Gh. Haddad, D. Petrovic, G. Popovic, E. Chatzitheodoridis, and A. Vujanic,R. Duffait, and P. Wurmsdobler 1073
ISROMAC 2000 Vibrational Diagnostics at Machines in Operation, a Tool for Failure Root Cause Analysis Ulrich Sudmersen, Oliver Pietsch, Wilfried Reimche, and Dieter Stegemann 1079
ISROMAC 2000 Experimental and Predicted Rigid Rotor Stability Threshold of Axial Groove and Three Lobe Bearings R.D. Flack, G.J. Kostrzewsky, and L.E. Barrett 1086
ISROMAC 2000 Including the Effects of Flexible Bearing Supports in Rotating Machinery Jose A. Vazquez, Lloyd E Barrett, and Ronald D. Flack 1092
ISROMAC 2000 Comparison of Mobility Method and Mass Conservation Method in a Study of Dynamically Loaded Journal Bearings B. Yu and J.T. Sawicki 1100
ISROMAC 2000 An Experimental Study on Static and Dynamic Characteristics of Swirl Braked Grooved-Seals Takuzo [watsubo and Hidetsugu [shimaru 1108
ISROMAC 2000 CFD-Perturbation Seal Rotordynamic Model for Tilted Whirl About Any Pivot Axial Location N. Kim and D.L. Rhode 1116
ISROMAC 2000 Design of Swirl Brakes for High Pressure Centrifugal Compressors Using CFD Techniques J. Jeffrey Moore, D. Lee Hill, and Fred Marshall 1124
ISROMAC 2000 Technical Fault Diagnosis and Control for Propeller Pumps M. M. Schroll and H.E. Siekmann 1133
ISROMAC 2000 Health Monitoring and Quality Assurance for Rotary Micro-machines and Active Sensors Sandip Dutta and Victor Giurgiutiu 1141
ISROMAC 2000 Gear Fault Detection With Time-Frequency Based Parameter NP4 V. V. Polyshchuk, F. K. Choy, and M. J. Braun 1148
ISROMAC 2000 Development of an Online Diagnostic System Software for a Turbogenerator Set J.S. Rao, Ashish K. Darpe, Jose John, and Amit Bhatnagar 1156
ISROMAC 2000 Finite Element Analysis of Dynamics and Fatigue Damage of Turbine Blades with Temperature Influence Oleg V. Repetski 1164
ISROMAC 2000 Balancing of an Experimental Rotor Without Trial Runs Eduardo Preciado Delgado and Roy H. Bannister 1171
ISROMAC 2000 The Energy Analysis Method in Vibrations With Rotor/Stop Rubbing Dai Xingjian, Zhang Xiaozhang, and Jin Zhaoxiong 1179
ISROMAC 2000 Transient Response Analysis for a Large Scale Pumped Storage Hydro-Turbine Rotor-Bearing Dynamic System Chang Chengsong, Feng Fuzhou, Chu Fulei 1185
ISROMAC 2000 Nonsmooth Rub-Impact Bifurcation Analysis in an Eccentric Rotor System With Rigid Constraint Qishao Lu, Sijin Zhang, and Shimin Wang 1195
ISROMAC 2000 Calculation and Testing Research for Shafting Vibration Huang Dinan, Sa Benjie, GeQing, and Zhang Weizhen 1202
ISROMAC 2000 Non-Linear Vibration Characteristics of Large-Capacity Turbine Generator Unit Huang Xiuzhu and Su Qin 1209
ISROMAC 2000 The Analysis and Diagnosis of 2X Vibration in Turbo-Generators Chenbin Deng, Shanyong Wang, and Songyuan Lu 1215
ISROMAC 2000 Realization of Automatic On-Line Fault Diagnosis of Rotating Machine by Fuzzy Identification Xu Feng Yang Yubing, and Wang Baosheng 1222
ISROMAC 2000 Centralized Parameter Model of the Flexible Rotor Shaojian Xiao 1228
ISROMAC 2002 Numerical Simulation of Jet Impact on Plane Wall and Simplified Pelton Bucket with VOF Method B Zoppe, T Maitre, P Leroy FD-ABS-106
ISROMAC 2002 Numerical and Experimental Analysis of Free Surface Jet Flow in Pelton Turbine J-L Kueny, G Daram FD-ABS-124
ISROMAC 2002 Numerical and Experimental Analysis of Free Surface Flow in a 3D Non Rotating Pelton Bucket S Kvicinsky, J-L Kueny, F Avellan FD-ABS-125
ISROMAC 2002 Three Dimensional Numerical Analysis of a High Pressure LO2 Turbopump Impeller B-J Ahn, Y-C Woo, D-W Kim, Y-J Kim FD-ABS-036
ISROMAC 2002 Three-dimensional Computation of Unsteady Cavitating Flow in a Cascade K Okita, T Kajishima FD-ABS-076
ISROMAC 2002 Numerical Prediction Method of a Submerged Vortex nad its Application to the Flow in Pump Sumps with and Without a Baffle Plate R Iwano, T Shibata, T Nagahara, T Okamura FD-ABS-114
ISROMAC 2002 Numerical Analysis of Unstable Phenomena of Cavitation in Cascade with Finite Blade Numbers Y Iga, M Nohmi, A Goto, B-R Shin, T Ikohagi FD-ABS-128
ISROMAC 2002 Numerical Methods for Cavitating and Free Surface Flows in Industry P Dupont, T Okamura, J-L Kueny FD-ABS-146
ISROMAC 2002 Numerical Method for Cavitating Flow Simulations and its Application to Axial Flow Pumps Y Tamura, M Fukaya, Y Matsumoto FD-ABS-129
ISROMAC 2002 Pressure Fluctuation Measurements in Hydro Turbine Models M Farhat, F Avellan, U Seidel FD-ABS-142
ISROMAC 2002 Modeling of Unsteady Sheet Cavitation on Marine Propulsors S A Kinnas, H Lee, Y-L Young FD-ABS-147
ISROMAC 2002 Numerical Simulation of Turbopump Inducer Cavitating Behavior O Coutier-Delgosha, P Morel, R Fortes-Patella, J L Reboud FD-ABS-127
ISROMAC 2002 Numerical Study of Non Linear Interactions in 2D Nozzle Transonic Flow O Bron, T Fransson, J Caro, S Aubert FD-ABS-037
ISROMAC 2002 Numerical Aeroacoustics Using a Combined CFD-/FFOWCS-Williams Hawkings Method I Pantle, F Magagnato, M Gabi FD-ABS-014
ISROMAC 2002 Steady and Unsteady Casingwall Flow Phenomena in a Single Stage Low Speed Compressor at Part-load Conditions H Saathoff, A Deppe, U Stark, M Rahdenbur, H Rohkamm, D Wulff, G Kasyna FD-ABS-038
ISROMAC 2002 Blade Surface Pressure Fluctuations and Acoustic Radiation from an Axial Fan Rotor Due toTurbulent Inflow Th H Carolus, M Stremel FD-ABS-015
ISROMAC 2002 Numerically Determined Boundary Layer Parameters Employed in Axial Fan Noise Prediction Models M Schneider, T Carolus FD-ABS-027
ISROMAC 2002 Structure and Propagation of a Stall Cell in a Rotor of an Axial Flow Fan Y Miyake, T Deguchi FD-ABS-003
ISROMAC 2002 Numerical Simulation of Combustion and Rotor-stator Interaction in a Turbine-combustor D D Isvoranu, P G A Cizmas FD-ABS-050
ISROMAC 2002 Rotor Cascade Shape Optimization with Unsteady Passing Wakes Using Implicit Dual Time Stepping and Genetic Algorithm E-S Lee, G S Dulikravich, B H Dennis FD-ABS-053
ISROMAC 2002 Application of the Turbulent Potential Model to Unsteady Flows and Three-dimensional Boundary Layers B Perot, S Are, X Zhang FD-ABS-073
ISROMAC 2002 Experimental and Theoretical Analysis of the Unsteady Stator-rotor Interation Flow Field in an Axial Fan Stage K K Nielsen, S A Danczyk, C M Myllerup, G L Morrison FD-ABS-087
ISROMAC 2002 Experimental Investigation of the Effects of Periodic Wakes on Compressor Cascade Blade Boundary Layers I-W Rim, K-R Cho, W-G Joo FD-ABS-091
ISROMAC 2002 Intermittent Flow Regimes in a Transonic Fan Airfoil Cascade J Lepicovsky, E R Mc Farland, R V Chima, V R Capece, J Hayden FD-ABS-131
ISROMAC 2002 Endwall Effects on IGV Surface Unsteady Pressures in a Transonic Compressor T J Leger, T M Hutton, D A Johnston, J M Wolff FD-ABS-132
ISROMAC 2002 Split-domain Harmonic Balance Solutions to Burger’s Equation for Large Amplitude Disturbances R C Maple, P I King, P D Orkwis FD-ABS-144
ISROMAC 2002 Preliminary Study of Vortices Effects on Flow Along a Concave Wall Surface C-R Wang FD-ABS-072
ISROMAC 2002 Vibration Analysis of an Induction Motor Under Electromagnetic Force T Iwatsubo, S Kawamura, Y Hayashi, K Shiohata DD-ABS-039
ISROMAC 2002 Determination of Rotordynamics Parameters for the Jeffcott Rotor-bearing Model A Antonio-García, J Gömez-Mancilla, V V Kucherenko DD-ABS-057
ISROMAC 2002 Perturbed Pressure Field Solution for Misaligned Short Journal Bearings J Gömez-Mancilla, V Nosov DD-ABS-060
ISROMAC 2002 The Dynamics Behavior of a Rotor-auxiliary-damper System Passing the Critical Speed X-J Dai, J-P Dong, X-Z Zhang DD-ABS-061
ISROMAC 2002 Design of a Safety Valve Driven with Shape Memory Alloys J C Leön, A K Ivanova, I C Mariscal, V M Löpez Hirata DD-ABS-104
ISROMAC 2002 A Study on the Effect of Partial Admission on Steam Whirl in High Pressure Turbines H Kanki, N Mureithi, M Kawanishi, N Goshima, H Morita, Y Yamamoto DD-ABS-106
ISROMAC 2002 A Study for Dynamically Expectable Effects of Concept Design of Optical Storage Disk Drive S-W Cha, J-S Lee, Y-R Moon DD-ABS-111
ISROMAC 2002 Design Optimization of Tilting-pad Journal Bearing Using a Genetic Algorithm H Saruhan, K E Rouch, C A Roso DD-ABS-003
ISROMAC 2002 Effect of Bearing Dynamic Stiffness on Gear Vibration D P Fleming DD-ABS-055
ISROMAC 2002 On Using the Transfer Matrix Formulation for Transient Analysis of Non-linear Rotor Bearing Systems A Liew, N S Feng, E J Hahn DD-ABS-097
ISROMAC 2002 Experimental and Predicted Rigid Rotor Stability Threshold of Three-lobe Bearings: Effects of Load Orientation R D Flack, B C Pettinato, L E Barrett DD-ABS-038
ISROMAC 2002 A Nonlinear Model for Prediction of Dynamic Coefficients in a Hydrodynamic Journal Bearing J T Sawicki, T V V L N Rao DD-ABS-102
ISROMAC 2002 Central Seal Can Eliminate Fluid Whip D E Bently, J J Yu, P Goldman, A Petchenev DD-ABS-062
ISROMAC 2002 Measured Gas Wave Journal Bearing Load Capacity Under Steady Loads F Dimofte, D P Fleming, T G Keith Jr DD-ABS-091
ISROMAC 2002 The Role of Steps in Compressible Narrow Groove Analysis C H-T Pan DD-ABS-096
ISROMAC 2002 Rotating Microsystems W Brenner, F Suemecz, G Popovic, O Del Medico DD-ABS-063
ISROMAC 2002 A Torque Testing Stage for Rotating Micro-electro-mechanical Devices P Wurmsdobler, T Messaoudi, R Duffait, W Brenner DD-ABS-001
ISROMAC 2002 The Micro Harmonic Drive: A High Precision Micro Gear System Miniaturized by LIGA R Degen, R Slatter DD-ABS-005
ISROMAC 2002 Sensor for Torque and Friction Moment of Micro-motors and Rotating Microsystems G Abraham, A Matzner, T Messaoudi, E Gschiegl, D Hoppel, M Wicha DD-ABS-011
ISROMAC 2002 Design Study of a Micromachined Gas Turbine with 3-Dimensional Impeller K Isomura, M Murayama, H Yamaguchi, N Ijichi, H Asakura, N Saji, O Shiga, K Takahashi, T Kawakubo, T Watanabe, A Yamagata, H Tange, S Tanaka, T Genda, M Esashi DD-ABS-013
ISROMAC 2002 Design and Fabrication Challenges for Micromachined Gas Turbine Generators S Tanaka, K Isomura, T Kato, F Sato, M Oike, T Genda, M Hara, T Kamatsuchi, S Sugimoto, J-F Li, H Yamaguchi, N Ijichi, M Murayama, K Nakahashi, M Esashi DD-ABS-014
ISROMAC 2002 Design and Evaluation of a Micro Wankel Rotary Engine for Deep Etching Process K C Jiang, P D Prewett DD-ABS-030
ISROMAC 2002 Mechanical Design Studies on Small Brushless Motors W Amrhein, S Silber, K Nenninger, G Trauner DD-ABS-076
ISROMAC 2002 Design and Evaluation of Piezoelectric Micromotors J F Manceau, S Scortesse, F Bastien DD-ABS-016
ISROMAC 2002 Fabrication Technique of Series Traveling-wave Type Ultrasonic Motors Y-P Mo, M-Q Hu, S Bi, L Jin, J-P Gu, Z-K Xu, X-J Wang DD-ABS-081
ISROMAC 2002 Research on the Resonant Booster of Ultrasonic Motors Driving J-P Gu, M-Q Hu, B Shi, L Jin, Y-P Mo, X-J Wan, Z-K Xu DD-ABS-098
ISROMAC 2002 Developments in Agile Engineering for Turbomachinery D Japikse Concepts NREC IL-1-2
ISROMAC 2002 Focusing Gas Turbine Research on the Technically Important and Economically Relevant Issues Facing the Industry D Wisler GE Aircraft Engines IL-4
ISROMAC 2002 The Flow Rate Influence on the Interaction of a Radial Pump Impeller and the Diffuser A Akhras, M El Hajem, J-Y Champagne, R Morel FD-ABS-078
ISROMAC 2002 An Analysis of How Torque is Transferred by Axial Splined Assembly H Blanc, L Boccaletto, J-L Charles, P Mondetguy DD-ABS-105
ISROMAC 2002 Numerical Evaluation of Flow and Performance of Turbo-pump Inducers S-H Kang, C-Y Shim FD-ABS-044
ISROMAC 2002 Higher Order Rotating Cavitation in an Inducer A Fujii, S Azuma, Y Yoshida, Y Tsujimoto, H Horiguchi, S Watanabe FD-ABS-068
ISROMAC 2002 Cavitation Induced Vibration Caused by Rotating-stall-type Phenomenon in LH2 Turbopump T Shimura, M Yoshida, K Kmijo, M Uchiumi, Y Yasutomi FD-ABS-111
ISROMAC 2002 Observation of the Inner Flow in the Inducer H Yamada, S Hasegawa, M Watanabe, T Hashimoto, T Kimura, J Takita, I Kubota FD-ABS-135
ISROMAC 2002 Inducer Design Criteria C Bonhomme, C Rebattet, M Wegner FD-ABS-137
ISROMAC 2002 Overview of Commercial Pump Inducer Design D Japikse FD-ABS-148
ISROMAC 2002 Three-Dimensional Analysis of Rotordynamic Fluid Forces on Whirling and Cavitating Finite-length Inducers L d’Agostino, M R Venturini Autieri FD-ABS-103
ISROMAC 2002 Performance Enhancement for Overhauled Jet Engines by Application of the Advanced Recontouring Process H Hoenen, K Ellenberger FD-ABS-002
ISROMAC 2002 Reduction of Discrete-frequency Fan Noise Using Slit-like Expansion Chambers A Sadamoto, Y Murakami FD-ABS-011
ISROMAC 2002 Proposition of Unique Pumping System with Counter-rotating Mechanism T Kanemoto, S Oba FD-ABS-031
ISROMAC 2002 Propagation of Flow-induced Noise Due to Vortex Shedding Behind a Circular Cylinder at Low Reynolds Number G-W Yun, H-C Choi FD-ABS-077
ISROMAC 2002 The Reattachment Process in Low Reynolds Number Flow Over a Backward-facing Step M Takai, T Ogawa, K Setoyama, S Honami FD-ABS-143
ISROMAC 2002 Study on the Performance of the Sirocco Fan (Fow Around the Runner Blade) T Adachi, N Sugita FD-ABS-028
ISROMAC 2002 Influence of the Tip Clearance on the Characteristics of a 1.5 Compressor Stage with Regard to the Indexation M Y Layachi, A Bölcs FD-ABS-049
ISROMAC 2002 Multi-control-volume Analysis of the Compression Process in a High-temperature Root’s Type Compressor D I Blekhman, J C Mollendorf, J D Felske, J A Lordi FD-ABS-075
ISROMAC 2002 Aerodynamic and Performance Studies of a Three-stage High Pressure Research Turbine with 3-D-blades, Design Point and Off-design Experimental Investigations M T Schobeiri, J L Gilarranz, E S Johansen FD-ABS-100
ISROMAC 2002 Numerical Studies on the Performance Prediction of a Pump System C-H Choi, G-S Lee, J-H Kim, S-S Yang, D-S Lee FD-ABS-119
ISROMAC 2002 Optimization of 2-D Axial-turbine Blade to Minimize the Pressure Loss S-Y Cho, B-S Choi, E-S Yoon FD-ABS-139
ISROMAC 2002 Early Fault Detection: An Overview D-H Hellmann DD-ABS-107
ISROMAC 2002 Experimental Investigation and Numerical Simulation of Two Centrifugal Pump Operating Under Variable Gas/Liquid Two-phase Flow Conditions P Suryawijaya, G Kosyna, R Praetor, J Kecke DD-ABS-015
ISROMAC 2002 A Gas Compressor Using Magnetic Fluid-4th Report: Test of a New Apparatus Having Coiled Channel and Rotating Permanent Magnets M Sadatomi, F Kuriyama, Y Itonaga, M Nishimura DD-ABS-058
ISROMAC 2002 Homogeneous and Heterogeneous Nucleation and Wet-steam Flow in a Nozzle and an LP-turbine Cascade D E Bohn, H, Kerpicci, J Ren, N Sürken DD-ABS-095
ISROMAC 2002 Vibrations and Sound Radiation Generated by Contact Between a Rotating Wheel and a Plane L Gaul, M Fischer, U Nackenhorst DD-ABS-006
ISROMAC 2002 Thermoelastic Vibrations of Rotating Cylindrical Structures Generated by a Space-fixed Heat Source J Wauer, J Heilig DD-ABS-008
ISROMAC 2002 Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction Dampers L Panning, W Sextro, K Popp DD-ABS-028
ISROMAC 2002 Evaluation of the Mistuned Bladed Discs Dynamic Behavior by ANN (Artificial Neural Network) L Lecce, G Scarselli, M D’Ischia, G Regine DD-ABS-054
ISROMAC 2002 System Behaviour and Stability of Radial Coupled Rolls H Dresig, J Weiss DD-ABS-027
ISROMAC 2002 Perturbation Teory for Vibrations and Gyroscopic Systems P Lancaster DD-ABS-041
ISROMAC 2002 Nonlinear Normal Modes of a Rotating Shaft Based on the Invariant Manifold Method M Legrand, D-Y Jiang, C Pierre, S W Shaw DD-ABS-084
ISROMAC 2002 Stability of a ‘Stiff’ Pendulum Pinned to a Rotating Hub S Naguleswaran DD-ABS-056
ISROMAC 2002 Nonlinear Dynamics of a Shaft Rotating at Nonconstant Rates: Pre-buckled Case C-K Ma DD-ABS-080
ISROMAC 2002 Non Linear Dynamics Due to Fan Blade Off in a Turbomachinery B Bernay, M Pascal DD-ABS-012
ISROMAC 2002 Non-linear Rotordynamics: Computational Strategies T J Chalko DD-ABS-085
ISROMAC 2002 A 3-Dimentional Finite Element Vibration Analysis of Blades for Steam Turbines J-P Park, A-L Xu, S-J Ryu DD-ABS-088
ISROMAC 2002 On the Uniqueness of Axes in the Kinematics of Rigid Body Precessions G Cantarelli, C Risito DD-ABS-042
ISROMAC 2002 Secondary Flow and Heat Transfer in an Axially Rotating Flow Passage with Twin Concentric Orifices S Torii, W-J Yang HT-ABS-002
ISROMAC 2002 Heat Exhange in Combustion Chambers of Steam Generators and Temperature Regime of the Water Wall Tubes A Mikhlevskiy, G Polupan, G Jarquin Lopez HT-ABS-006
ISROMAC 2002 Recuperator of Heat on the Base of Compact Heat Exchanger A Gershuni, A Nishchik, Ye Pysmennyy, G Polupan, F Sanchez-Silva, I Carvajal-Mariscal HT-ABS-007
ISROMAC 2002 1700 Class Advanced Closed-cycle Gas Turbine System M Koyama HT-ABS-009
ISROMAC 2002 An Application of Laser-induced Fluorescence to Heat Transfer Measurement of Rotating Surface C Nuntadusit, K Ishibashi, H Kimoto, K Takeishi HT-ABS-015
ISROMAC 2002 Heat Transfer Measurements on a Gas Turbine Blade for ACRO-GT2000 H Saeki, Y Fukuyama HT-ABS-025
ISROMAC 2002 An Experimental and Numerical Study of the Heat Tranfer Performance of Sharp-edged and Rounded Ribs in Squeare Ducts A Haasenritter, M Amro, B Weigand HT-ABS-003
ISROMAC 2002 Flow Characteristics in 2-Leg Ribbed Internal Coolant Passages of Gas Turbine Airfoils with Turing Vane and Film Cooling Hole Ejection D Chanteloup, A Bölcs HT-ABS-004
ISROMAC 2002 Rib Fin Effects on the Overall Equivalent Heat Transfer Coefficient in a Rib Roughened Cooling Channel of a Turbine Airfoil M E Taslim HT-ABS-005
ISROMAC 2002 Effect of Rotation on Heat Transfer in Two-pass Square Channels with Parallel and Crossed 45 Angled Rib Turbulators L Al-Hadhrami, J-C Han HT-ABS-031
ISROMAC 2002 An Experimental Investigation on Porous Transpiration Cooling-Paret I: An Application of Infrared Measurement Technique J-H Wang, J Messner, H Stetter HT-ABS-016
ISROMAC 2002 An Experimental Investigation on Porous Transpiration Cooling-Paret II: Comparison of Cooling Methods and Media J-H Wang, J Messner, H Stetter HT-ABS-017
ISROMAC 2002 Aerodynamic Effects of Film Cooling on a Modern 3-Dimensional Nozzle Guide Vane: An Experimental Investigation S-H Wiers, T H Fransson HT-ABS-001
ISROMAC 2002 Adiabatic Effectiveness and Heat Transfer Coefficient of Shaped Film Cooling Holes on a Scaled Guide Vane Pressure Side Model J Dittmar, A Schulz, S Wittig HT-ABS-019
ISROMAC 2002 Effects of an Embedded Longitudinal Vortex on Film Cooling Performance in a Turbulent Boundary Layer J-H Lee, S-H Lee, J-S Lee, G-C Park HT-ABS-028
ISROMAC 2002 Film Cooling Effectiveness and Heat Transfer Coefficient Distributions on a Gas Turbine Nozzle Vane G Barigozzi, G Benzoni HT-ABS-037
ISROMAC 2002 Numerical and Experimental Study on Heat and Fluid Flow of a Scroll Compressor H-S Rew, S-W Hong HT-ABS-011
ISROMAC 2002 Numerical Analysis on Wind Turbine Characteristics Based on Steady QCM Y Hasegawa, K Kikuyama, K Karikomi FD-ABS-116
ISROMAC 2002 Study of Evaluating Method on Wind Turbine Characteristics Based on Steady QCM M Murakami, K Seki FD-ABS-138
ISROMAC 2002 Wind Turbines: An Environmental Technology L Surugiu, I Paraschivoiu FD-ABS-061
ISROMAC 2002 Wind/Diesel Hybrid System in Vietnam Y Shimizu, T Maeda, Y Kamada, N Duc Loc FD-ABS-062
ISROMAC 2002 Effects of Loading and Clearance Variation on Tip Vortex and Endwall Blockage D C Wisler, H-W Shin, B F Beacher FD-ABS-004
ISROMAC 2002 The Pre-stall Behaviour of a 4-Stage Transonic Compressor and Stall Monitoring Based on Artificial Neural Networks F-O Methling, H Stoff, F Gauer FD-ABS-017
ISROMAC 2002 Experimental Investigation of the Periodic Unsteady Transonic Flow Field Around a Compressor Blade by Means of Particle Image Velocimetry (PIV) A Lehr, A Bölce FD-ABS-019
ISROMAC 2002 Internal Flow of High Specific-speed Diagonal Flow Fan (Rotor Outlet Flow Fields with Rotating Stall) N Shiomi, W-X Cai, A Muraoka, K Kaneko, T Setogychi FD-ABS-023
ISROMAC 2002 Rotating Stall in Centrifugal Compressor Vaneless Diffuser: Experimental Analysis and Phenomenon Characterization G Ferrara, L Ferrari, C P Mengoni, M De Lucia, L Baldassarre FD-ABS-123
ISROMAC 2002 Stereo-PIV in Aerated Wastewater Pond and Side Channel Blower A Schimpf, H E Siekmann, A Steinmann FD-ABS-057
ISROMAC 2002 Steady Fluid Flow Investigation Using L2F and PIV in a Multi-pass Coolant Channel M Elfert, M P Jarius HT-ABS-033
ISROMAC 2002 Investigations of the Flow in Cross-flow-fans Using CFD and Particle-image-velocimetry (PIV) M Gabi, S Dornstetter FD-ABS-021
ISROMAC 2002 Particle Image Velocimetry as CFD-validation Tool for Flow Field Investigations in Centrifugal Pumps C M Heilmann, H E Siekmann FD-ABS-115
ISROMAC 2002 A New Spatio-temporal Matching Algorithm for 3D-particle Tracking Velocimetry J Willneff, A Gruen FD-ABS-026
ISROMAC 2002 PIV Investigation of Rotor Generated Blade Row Unsteady Aerodynamics S Fleeter, A J Sanders, J Papalia FD-ABS-006
ISROMAC 2002 An Inevstigation of Axial Turbomachinery Flows Using PIV in an Optically-unobstructed Facility Y-C Cow, O Uzol, J Katz, C Meneveau FD-ABS-048
ISROMAC 2002 DPIV Study of the Flow in a Mikro-axial Blood Pump Ch Brücker, W Schrüder, J Apel, H Reul, Th Siess FD-ABS-080
ISROMAC 2002 Analysis of Rotor Stator Interactions in a Vaned Diffuser of a Radial Flow Pump Using PIV Measurement Technique G Wuibaut, G Bois, P Dupont, G Caignaert FD-ABS-018
ISROMAC 2002 Laser 2 Focus Measurements and Flow Visualisation Within the Rotating Rotor and the Side Channel of a Side Channel Compressor A Krake, K Fiedler FD-ABS-010
ISROMAC 2002 Turbulent Flow Pattern in Narrow Rib-roughened Channel with PIV Visualization K Haga, M Kaminaga, R Hino, M Monde FD-ABS-104
ISROMAC 2002 Operational Stresses on a Mixed-flow Pump Impeller Manufactured by Welding A Ido, H Satoh, M Ikezawa FD-ABS-117
ISROMAC 2002 An Experimental Study on the Fluid Forces Induced by Rotor-stator Interaction in a Centrifugal Pump S Guo, H Okamoto FD-ABS-126
ISROMAC 2002 Computational and Experimental Investigation of the Velocities, Pressures, and Forces in a Single Volute Centrifugal Pump S M Miner, R D Flack FD-ABS-043
ISROMAC 2002 Effect of Volute Design and Number of Impeller Blades on Lateral Impeller Forces and Hydraulic Performance D O Baun, R D Flack FD-ABS-108
ISROMAC 2002 Experimental Study on Performance of Centrifugal Pumps at Low Reynolds Number K Tanaka, H Ohashi, H Yoda FD-ABS-109
ISROMAC 2002 Pressure Fluctuation in Vaned Diffuser Downstream of Centrifugal Pump Impeller A Furukawa, T Nakagawa, H Takahara, Y Ono FD-ABS-069
ISROMAC 2002 Numerical Calculation of the Three-dimensional Swirling Flow Inside the Centrifugal Pump Volutes E C Nursen, E Ayder FD-ABS-042
ISROMAC 2002 Investigation of “Inlet Cone Vortex” Pressure Pulsation Characteristics and Mechanisms H Higashimori FD-ABS-074
ISROMAC 2002 Comparison of Two Diffusers in a Transonic Centrifugal Compressor K Nakagawa, H Hayami, Y Keimi FD-ABS-110
ISROMAC 2002 The Influence of Flow, Head and Speed on Vibration of a Cryogenic Hydraulic Turbine A J Smalley, J R Hollingsworth FD-ABS-070
ISROMAC 2002 Enhanced Rotordynamics for High Power Cryogenic Turbine Generators J V Madison FD-ABS-151
ISROMAC 2002 Transient Characteristics of Radial Outflow Turbine Generators D R Smith FD-ABS-150
ISROMAC 2002 Verification of Axial Rotor Oscillations in Cryogenic Turbine Generators C A Evrensel, C D Finley FD-ABS-088
ISROMAC 2002 Observation of Jump Phenomena in Non-linear Axial Rotor Oscillations C D Finley, C A Evrensel FD-ABS-149
ISROMAC 2002 The Kimmel Equation for Hydraulically Damped Axial Rotor Oscillations P R LeGoy, S Fuelling FD-ABS-096
ISROMAC 2002 Non-linear Effect of Axial Rotor Oscillations on Rotordynamic Stability H E Kimmel FD-ABS-152
ISROMAC 2002 State-of-the-art Rotor Dynamic Analyses Program K Ramesh DD-ABS-010
ISROMAC 2002 On-off Control of Rotor Vibration by a Disk-type C-H Zhu, D A Robb, D J Ewins DD-ABS-043
ISROMAC 2002 Experimental and Theoretical Investigations of a Radial Turbine B Irwanto, J Gierm H-J Beer, D Pawandenat, H-J Hardtke DD-ABS-077
ISROMAC 2002 Anti Erosion Turbine: Cavitation & Silt Synergetic Erosion S-C Li, P W Carpenter DD-ABS-110
ISROMAC 2002 Development of the Floating Centrifugal Pump by Use of Non-contact Magnetic-drive and its Performance M Uno, T Masuzoe, I Aotani, S Oba, T Kanemoto DD-ABS-053
ISROMAC 2002 Optimization of Meridional Flow Channel Design of Pump Impeller S Miyauchi, H Horiguchi, J Fukutomi, A Takahashi DD-ABS-079
ISROMAC 2002 Damage Detection in Wicket Gates of Hydraulic Powerplants E Egusquiza, X Escaler DD-ABS-100
ISROMAC 2002 Cavitation Detection and Erosion Prediction in Hydro Turbines X Escaler, E Egusquiza, T Mebarki, F Avellan, N Farhat DD-ABS-101
ISROMAC 2002 Computational and Experimental Investigations of Leakage Flow Through Radial Labyrinth Seals V Sethu Manavalan, B V S S S Prasad, O Hanuma Kumar, N Najunda Rao DD-ABS-072
ISROMAC 2002 Refined Turbulence Modeling for Swirl Velocity in Turbomachinery Seals N-H Kim, D L Rhode DD-ABS-073
ISROMAC 2002 Research on Performances of Spiral-groove Gas Seal W X Cai, N Shiomi, K Kaneko, T Setoguchi DD-ABS-037
ISROMAC 2002 Application of Objective Function Method in Seal Analysis L Y Zhao, P E Allaire DD-ABS-009
ISROMAC 2002 Rotor-to-stationary Part Full Annular Contact Modeling A Muszynska DD-ABS-087
ISROMAC 2002 Modeling of Normal Contact Forces During the Interaction Between Blade and Casing J Jiang, J Ahrens, H Ulbrich DD-ABS-051
ISROMAC 2002 Numerical Simulation of a Multi-angular Retainer Bearing with Regard to Contact Forces P Novak, R Liebich, R Gasch DD-ABS-026
ISROMAC 2002 Stability of Synchronous Forward Whirl at Rotor-stator-contact U Ehehalt, R Markert, G Wegener DD-ABS-045
ISROMAC 2002 Recent Studies in Turbine Blade Cooling J-C Han Texas A&M Univ. IL-L-5
ISROMAC 2002 Effect of Reynolds Number on Heat Transfer in a Rotating Smooth Square Duct with Radially Outward Flow V Krishnamoorthy, C V Kiran Kumar HT-ABS-008
ISROMAC 2002 Large Eddy Simulation of Flow and Heat Transfer in a Periodic Rib-Roughened Rotating Square Duct A K Saha, S Acharya HT-ABS-014
ISROMAC 2002 Effects of Rib Configurations on Heat/Mass Transfer in a Two-pass Rotating Duct H-H Cho, S-Y Lee, D-H Rhee, W-G Joo, J-H Lee HT-ABS-024
ISROMAC 2002 Detailed Experimental and Numerical Heat/Mass Tranfer Investigations in a Rotating Two-pass Coolant Channel with Staggered 45 Ribs L Rathjen, D K Hennecke, C Sivade, K Semmler HT-ABS-034
ISROMAC 2002 A Two Orifice Model to Predict the Temperature Reduction of the Cooling Air in a Pre-swirl System M Dittmann, T Geis, V Schramm, S Kim, S Wittig HT-ABS-018
ISROMAC 2002 Transient Convective Heat Transfer from a Rotating MCM Disk with a Confined Air Jet Impingement W-S Su, L-K Liu, Y-H Hung HT-ABS-022
ISROMAC 2002 Heat Tranfer and Flow Characteristics in Co-rotating Disks with Ventilation Hub H-H Cho, C-H Won, D-H Rhee HT-ABS-023
ISROMAC 2002 Flow Structure Between Co-rotating Disks in a Cylindrical Enclosure S-C Wu, Y-M Chen HT-ABS-027
ISROMAC 2002 Numerical and Experimental Investigations of the Air Flow and Heat Transfer in Rotating Cavities D E Bohn, F Bouzidi, E E Kitanina, V V Ris, E N Smirnov, C Burkhardt, M W Wolff HT-ABS-035
ISROMAC 2002 Analysis of Electrokinetic Flow in a Micro-scale Rotor-stator Disk System C-Y Soong, S-H Wang HT-ABS-036
ISROMAC 2002 Local Mass/Heat Tranfer on a Turbine Blade Tip P Jin, R J Goldstein HT-ABS-012
ISROMAC 2002 The Use of CFD Methods for the Investigation of Flow and Performance of Centrifugal Pump Impellers W-D Zhou, Z-M Zhao, T-S Lee, S-H Winoto FD-ABS-001
ISROMAC 2002 Calculation of Skewed Laminar Boundary Layer on a Rotating Disk with Main Flow Streamed Toward Center T Kitahora, H Motoyama FD-ABS-040
ISROMAC 2002 Matrix Viscosity and Preconditioning for Rotating Turbomachinery M L Celestina, E Turkel FD-ABS-051
ISROMAC 2002 Numerical Simulation of Multiplicity and Stability of Mixed Convection in Rotating Curved Ducts L-Q Wang, T-L Yang FD-ABS-064
ISROMAC 2002 Numerical Simulation of Turbulent Fluid Flow and Heat Transfer in a Ribbed Rotating Two-pass Square Duct S-H Chen, T-M Liou FD-ABS-067
ISROMAC 2002 Numerical Analysis of Internal Flow in a Mixed-flow Pump M Iino, K Tanaka, K Miyagawa, T Okubo FD-ABS-112
ISROMAC 2002 Large Eddy Simulation of Unsteady Flow in a Mixed-flow Pump-2nd Report: Comparisons with LDV Measurements C Kato, H Mukai, A Manabe FD-ABS-118
ISROMAC 2002 Current Trend and Future Vision of Turbomachinery CFD C Hah Keynote
ISROMAC 2002 Darmstadt Rotor No. 2-Part I: Design and Stress Analysis of a One Stage Transonic Composite Compressor K Pirker, J Frischbier FD-ABS-084
ISROMAC 2002 Darmstadt Rotor No. 2-Part II: Design of Leaned Rotor Blades J Bergner, D K Hennecke, M Hoeger, K Engel FD-ABS-101
ISROMAC 2002 Darmstadt Rotor No. 2-Part III: Experimental Analysis of an Aft-swept Axial Transonic Compressor Stage S Kablitz, J Bergner, D K Hennecke, M Beversdorff, R Schodl FD-ABS-085
ISROMAC 2002 Darmstadt Rotor No. 2-Part V: Experimental Investigation of the Instability Behaviour of an Aft-swept Transonic Compressor Rotor S Wagner, S Kablitz, D K Hennecke, U Schmidt-Elsenlohr FD-ABS-102
ISROMAC 2002 Steady and Unsteady Analysis of the NASA MSFC High Head Unshrouded Impeller R F Blumenthal FD-ABS-056
ISROMAC 2002 The Effect of Blade Tip Geometry on the Tip Leakage Flow in an Axial Compressor Rotor C Stockhaus, H Stoff, W Volgmann FD-ABS-022
ISROMAC 2002 Nonuniform Flow in a High Speed Compressor Due to Axisymmetric Tip Clearance H-S Joo, S-J Song FD-ABS-033
ISROMAC 2002 The Performance of a 240 KW Centrifugal Compressor with Different Diffusers-Part I: Experimental Investigation A Engeda FD-ABS-0831
ISROMAC 2002 The Performance of a 240 KW Centrifugal Compressor with Different Diffusers-Part II: Numerical Investigation A Engeda FD-ABS-0832
ISROMAC 2002 Experimental Investigation of Cavitation Signatures in an Automotive Torque Converter Using a Microwave Telemetry Technique C L Anderson, L Zeng, A Narain, J Blough FD-ABS-045
ISROMAC 2002 Measurements of Strain on 310 mm Torque Converter Turbine Blades P O Sweger, C L Anderson, J R Blough FD-ABS-047
ISROMAC 2002 Analysis of the Flow Field in the Turbine of an Automotive Torque Converter Y F Liu, B Lakshminarayana FD-ABS-058
ISROMAC 2002 Flow Characteristics at the Pump/Turbine Interface of a Torque Converter at Extreme Speed Ratios A Habsieger, R D Flack FD-ABS-013
ISROMAC 2002 Computational Fluid Dynamics on Torque Converters: Validation and Application J Schweitzer, J Gandham FD-ABS-046
ISROMAC 2002 Numerical Simulation of the Time Dependent Interactions in the Flow Between the Blade Rows of a Hydrodynamic Torque Converter T Röcken, M Tertilt, W Volgmann, H Stoff FD-ABS-020
ISROMAC 2002 3D Effect of the Turbine Bias Angle of an Atomotive Torque Converter on Flow and Hydrodynamic Loss E Ejiri FD-ABS-008
ISROMAC 2002 Automotive Torque Converter Performance Prediction Using a New CFD Approach T Yamaguchi FD-ABS-066
ISROMAC 2002 Comparative Investigation on Axial Flow Industrial Fans of High Specific Performance with Unswept and Forward Swept Blades at Design and Off-design Conditions J Vad, A Corsini FD-ABS-016
ISROMAC 2002 Inquiry into Discrete Frequency Noise Source of Cross Flow Fan by Acoustic Holography S Yamada, S Nakashima, K Ootsuta FD-ABS-029
ISROMAC 2002 The Aaptation of the Distributed and Parallel Computing Environment to the Large-scale and Transient Problem in the Rotating Machinery H Kuroishi FD-ABS-060
ISROMAC 2002 Experimental Investigations of Mixed Flow Fan for Room Air Conditioner to Achieve High Static Pressure and Low Noise Y Izumi, T Sugio FD-ABS-063
ISROMAC 2002 Numerical Analysis for Propeller Fan in Freezing Compartment of Household Refrigerator S Igarashi, K Kitagawa FD-ABS-065
ISROMAC 2002 Numerical and Experimental Study of Three-dimensional Flow Structure in a Diagonal Flow Fan with Radial Vaneless Diffuser T Ohnishi, Y Miyake, K Kinoshita, M Kamada FD-ABS-079
ISROMAC 2002 Aerodynamic Performance of 2-Stage Jet Fan Having Forced-vortex-type Rotor M Nishi, K Yoshida, I Matsuda, K Yamasaki, K Kojima FD-ABS-107
ISROMAC 2002 Application Study of Unsteady CFD Analysis to Aerodynamic Noise for Pusher-type Axial Fan T Kobayashi, Y Kimura, M Mitsuda, P Pennacchi Politecnico di Milano FD-ABS-113
ISROMAC 2002 Fault Detection in a Centrifugal Pump Using Active Magnetic Bearings M Aenis, R Nordmann DD-ABS-017
ISROMAC 2002 Transverse Crack Modelling and Validation in Rotor Systems Including Thermal Effects N Bachschmid, E Tanzi, P Pennacchi, S Audebert DD-ABS-049
ISROMAC 2002 Deflections and Strains in Cracked Shafts Due to Rotating Loads: A Numerical and Experimental Analysis N Bachschmid, E Tanzi DD-ABS-078
ISROMAC 2002 New Modeling Approach for Detection and Behavioral Characterization of Cracked Rotating Shafts J Gömez-Mancilla, R García-Illescas, V Nosov DD-ABS-046
ISROMAC 2002 Study of Blade Dynamic Stresses with a Non Intrusive Measurement Technique: Experimental Results on a Power Station Turbine L Ratier, P Pennacchi Politecnico di Milano DD-ABS-020
ISROMAC 2002 Analytical and Experimental Investigations on Misaligned Rotors J S Rao, A Chawla DD-ABS-025
ISROMAC 2002 Identification of Rub and Unbalance in a 320MW Turbogenerators N Bachschmid, P Pennacchi, A Vania, G A Zanetta, L Gregori DD-ABS-050
ISROMAC 2002 Identification of a Generator Fault by Model Based Diagnostic Techniques P Pennacchi, A Vania DD-ABS-086
ISROMAC 2002 A Coupled Unbalance Response Analysis of Geared Two-shaft Rotor-bearing System A-S Lee, J-W Ha DD-ABS-032
ISROMAC 2002 Optimum Design for Rotor-bearing System Using Advanced Genetic Algorithm S-P Choi, Y-C Kim, B-S Yang DD-ABS-033
ISROMAC 2002 An Update of Alignment Method for Reduction of Shaft Vibration in a Combined Cycle Steam Turbine I-C Kim, S-B Kim, J-W Jung, S-M Kim DD-ABS-035
ISROMAC 2002 Study on the Prevention of the Pad Fluttering in a Tilting Pad Journal Bearing Using the Variation of Preload S-H Yang, U-H Nah, H-C Ha, C-S Kim, C-S Kang DD-ABS-036
ISROMAC 2002 Oil-free Roller Bearing with Aerostatic Cage for Turbocharger Applications-Part I: A Numerical and Theoretical Study A Wiebelt, A Schulz, S Wittig DD-ABS-064
ISROMAC 2002 Oil-free Roller Bearing with Aerostatic Cage for Turbocharger Applications-Part II: An Experimental Study A Wiebelt, A Schulz, S Wittig DD-ABS-065
ISROMAC 2002 Appearing of Large Amplitude Vibration in Cracked Rotor Systems by Analyzing the Coupling of Bending and Torsional Vibration T Zhou, J-X Xu, Z-C Sun DD-ABS-022
ISROMAC 2002 Vibration Reduction with Pendulum Balancer-Part I: Theory H L Wettergren DD-ABS-007
ISROMAC 2002 On the Balancing of Non-linear Rotor Bearing Foundation Systems P Y-P Chen, N-S Feng, E J Hahn DD-ABS-069
ISROMAC 2002 Failure Source Localization at Turbo-sets by Combined Vibration and Process Parameter Analysis U Süedmersen, C Scheer, O Pietsch, W Reimche, F-W Bach DD-ABS-018
ISROMAC 2002 Weibull Based Design Methodology for Rotating Aircraft Engine Structures E V Zaretsky, R C Hendricks, S Soditus DD-ABS-082
ISROMAC 2002 Residual Stress Measurement and its Application to Achieve Predicted Full Life Potential of Low Cycle Fatigue (LCF) Limited Engine Disks S Vukelich, S Berkley, S Russ, E F Bradley DD-ABS-031
ISROMAC 2002 Detection, Discrimination and Real-time Tracking of Cracks in Rotating Disks W C Haase, M J Drumm DD-ABS-108
ISROMAC 2002 Integrated Thermomechanical Design and Analysis Tools for Turbomachinery M Platt, C Cook, M Marsh DD-ABS-083
ISROMAC 2002 Advanced Modeling of Complex Stochasticity for Gas Turbine Engine Applications D M Ghiocel DD-ABS-092
ISROMAC 2002 Predictive Failure of Cylindrical Coatings Using Wiebull Analysis B L Vlcek, R C Hendricks, E V Zaretsky DD-ABS-109
ISROMAC 2002 Two- and Three DimentionalNumerical Experiments Representing Two Limiting Cases of an In-line Pair of Finger Seal Components M J Braun, V V Kudriavtsev, B M Steinetz, M P Proctor DD-ABS-070
ISROMAC 2002 Application of Vibration Monitoring Techniques for Damage Detection in Rotating Disks A L Gyekenyesi, J T Sawicki, G Y Baaklini DD-ABS-094
ISROMAC 2002 On the Appearance of Film Rupture in a Plain Journal Bearing V R Nosov, J Gömez-Mancilla DD-ABS-059
ISROMAC 2002 Design and Manufacture of Wind Turbine Generator Influencing Aerodynamic Performance A Juárez Gömez, A Kabastkai Ivanovna DD-ABS-103
ISROMAC 2002 Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach Y Biba, P Menegay FD-ABS-032
ISROMAC 2002 Shape Optimization of a Labyrinth Seal Applying the Simulated Annealing Method V Schramm, J Denecke, S Kim, S Wittig FD-ABS-086
ISROMAC 2002 Shape Optimization of Hydraulic Machinery Bladings R Schilling, R Reinelt, B Szilagyi, S Thum FD-ABS-145
ISROMAC 2002 Application of Evolutive Algorithms and Statistical Analysis in the Numerical Optimisation of an Axial Compressor A Clarich, V Pediroda, G Mosetti, C Poloni FD-ABS-009
ISROMAC 2002 Development of a Three-dimensional Geometry Optimization Method for Turbomachinery Applications S Kaemerer, J F Mayer, H Stetter, M Paffrath, U Wever, A R Jung FD-ABS-024
ISROMAC 2002 Optimization of Hydraulic Machinery Bladings by Multi Level CFD Techniques S Thum, R Schilling FD-ABS-082
ISROMAC 2002 Improvement of the Turbine Main Stop Valves with Flow Simulation in Erosion by Solid Particle Impact CFD Z Mazur, G Uriquiza, R Campos, J Kubiak, F Z Sierra FD-ABS-081
ISROMAC 2004 Compressor Design for the next Generation of Aero Engines Walther, Rainer ISROMAC10-2004-001
ISROMAC 2004 Numerical and Experimental Investigations on Profile Sails Siekmann, Helmut E.; Steinmann, Alexander O. ISROMAC10-2004-003
ISROMAC 2004 Acoustic Resonance in a Four-Stage High-Speed Axial Compressor Hellmich, Bernd; Seume, Jörg ISROMAC10-2004-004
ISROMAC 2004 Stall Margin Enhancing Flow Mechanisms in a Transonic Compressor Stage in Axial Casing Slots Wilke, Ingo C.; Kau, Hans-Peter ISROMAC10-2004-006
ISROMAC 2004 Fluid-Structure Interaction Simulation of Delay of Flutter Onset by Intentional Mistuning Gottfried, Dana, A.; Fleeter, Sanford ISROMAC10-2004-007
ISROMAC 2004 Structural Mistuning Effects on Flutter - A Symmetry-Based Analysis Gottfried, Dana A.; Fleeter, Sanford ISROMAC10-2004-008
ISROMAC 2004 Experimental Investigations on a Turbocharger Compressor Having a Recirculator for Surge Control Matyschok, Berthold; Stoffel, Bernd ISROMAC10-2004-010
ISROMAC 2004 Shock-Vortex Interaction in a Turbocompressor with Respect to Flow Conditions Near Stall Hofmann, Willy H.; Ballmann, Josef ISROMAC10-2004-012
ISROMAC 2004 Implementation of a Modified Air Intake System within the Scope of a Gas Turbine Compressor Retrofit Lehr, Andreas; Michaelsen, Christian S.; McCue, Robert E.; Mooney, James A. ISROMAC10-2004-013
ISROMAC 2004 Part Load Operating Performance and Stall Inception of a Single-Stage Axial-Flow Pump Goltz, Isabel; Kosyna, Günter; Wulff, Detlev; Schrapp, H.; Bross, Stephan ISROMAC10-2004-014
ISROMAC 2004 Mechanical Behavior of a 9.7 MW Induction Motor Under Fault Conditions - A Case History Thomas, G. Richard ISROMAC10-2004-016
ISROMAC 2004 Comparison of Calculated and Measured Flow Induced Oscillations of Centrifugal Pump Rotors Benra, Friedrich-Karl; Dohmen, Hans Josef; Schneider, Oliver ISROMAC10-2004-017
ISROMAC 2004 Heat Transfer Characteristics in a Rib Roughened Two-Pass Cooling Channel with Engine near Cross-Sections: An Experimental and Numerical Study Schubert, Sonja G.; Neumann, Sven Olaf; Weigand, Bernhard ISROMAC10-2004-018
ISROMAC 2004 Thermal-Fluid Transport Phenomena between Stationary and Rotating Parallel Disks Torii, Shuichi; Yang, Wen-Jei ISROMAC10-2004-019
ISROMAC 2004 Non-Standard Cavitation Instabilities in Inducers Tsujimoto, Yoshinobu; Horiguchi, Hironri; Fuji, Akira ISROMAC10-2004-020
ISROMAC 2004 Moisture Measurement in Operating Turbines Using a Novel Integrated Probe Wang, Lill; Cai, Xiaoshu ISROMAC10-2004-021
ISROMAC 2004 Steady-State Analysis of Conjugate Heat Transfer of a Gas Turbine First Stage Bucket Mazur, Zdzislaw; Campos, Alfonso; Campos-Amezcua, Rafael ISROMAC10-2004-023
ISROMAC 2004 Some Techniques to Improve the Operation Range of the Wells Turbine Kinoue, Yoichi; Setoguchi, Toshiaki; Nakano, Toshihiro; Mohammad, Mamun; Kaneko, Kenji ISROMAC10-2004-025
ISROMAC 2004 Designing a Cooling Fan by Computational Fluid Dynamics (CFD) and Numerical Optimization Iwase, Taku; Sugimura, Kazuyuki ISROMAC10-2004-026
ISROMAC 2004 Tip-Aerodynamics of Forward Swept Rotor-Blades in a Highly-Loaded Single-Stage Axial-Flow Low-Speed Compressor Clemen, Carsten; Rohkamm, Henning; Stark, U.; Saathof, Horst ISROMAC10-2004-027
ISROMAC 2004 Simple and Regenerative GT with Wet Compression Petr, Vaclav ISROMAC10-2004-028
ISROMAC 2004 Analysis of Dust Separation Inside a Pre-Swirl Cooling Air System Schneider, Oliver; Dohmen, H.-J.; Benra, F.-K.; Brillert, D. ISROMAC10-2004-029
ISROMAC 2004 Higher Order Rotating Cavitation in an Inducer under Head Break Down Fujii, Akira; Kawamura, Yusuke; Hidaka, Tatsuya; Uchiumi, Masaharu; Yoshida, Yoshiki; Tsujimoto, Yoshinobu ISROMAC10-2004-030
ISROMAC 2004 Effects of Inclined Baffle on Heat Transfer Characteristics of Backward-Facing Step Flow in a Channel Tsay, Yeong-Ley; Cheng, Jen-Chich ISROMAC10-2004-031
ISROMAC 2004 Unsteady Radial Trust of a Centrifugal Pump due to the Impeller/Volute Interaction Majidi, Kitano ISROMAC10-2004-032
ISROMAC 2004 Effect of Swirler Geometry on None-Premixed Combustion in a Gas Turbine Combustor Majidi, Kitano ISROMAC10-2004-033
ISROMAC 2004 The Practical Application and Innovation of Cleaning Technology for Heat Exchangers Saxon, Jr. George E.; Jaresch, Dirk ISROMAC10-2004-034
ISROMAC 2004 Static Pressure Measurements and Cavitation Signatures on the Nose of a Torque Convertor's Stator Blade Mekkes, Joel T.; Anderson, Carl L.; Narain, Amitabh ISROMAC10-2004-035
ISROMAC 2004 Externally Pressurized Bearing - A Tool for Rotordynamic Machinery Management Bently, Donald E.; Mathis, Dean; Thomas, G. Richard; Sever, D. Craig ISROMAC10-2004-036
ISROMAC 2004 Modeling of a Sequential Two-Stage Combustor Hendricks, Robert C.; Liu, Nan-Suey; Gallagher, John R.; Ryder, Robert C.; Brankovic, Andy; Hendricks, John A. ISROMAC10-2004-037
ISROMAC 2004 Torque Transmission Device at Zero Leakage Hendricks, Robert C.; Mullen, Robert L. ISROMAC10-2004-038
ISROMAC 2004 Water Injected Turbomachinery Hendricks, Robert C.; Shouse, Dale T.; Roquemore, W. M. ISROMAC10-2004-039
ISROMAC 2004 Minimization of Contact Forces in Case of Rotor Rubbing Using an Actively Controlled Auxiliary Bearing Ulbrich, Heinz; Chavez, Alvaro; Dhima, Rashid ISROMAC10-2004-042
ISROMAC 2004 Experimental Observations of Centrifugal Pendulum Vibration Absorbers Nester, Tyler M.; Schmitz, Peter M.; Haddow, Alan G.; Shaw, Steven W. ISROMAC10-2004-043
ISROMAC 2004 Investigations of Rotor-Stator Interactions in Turbomachinery Legrand, Mathias; Pierre, Christophe; Peseux, Bernard ISROMAC10-2004-044
ISROMAC 2004 An On-line Monitoring System for Surge and Stall Prediction in Multi Stage Axial Compressors Hönen, Herwart T.; Arnold, Thorsten ISROMAC10-2004-045
ISROMAC 2004 Unsteady Flow in a Rotating Drum undergoing Intermittent Spin-Up and Spin-Down Processes Ohue, Hiroshi; Yang, Wen-Jei ISROMAC10-2004-046
ISROMAC 2004 Prediction of Leakage Flow and Rotordynamic Forces in a Labyrinth Seal using a quasi-3D CFD Model Adami, Paolo; Milli, Andrea; Martelli, Francesco ISROMAC10-2004-047
ISROMAC 2004 Stall Inception Phenomena in Three Single-Stage Low-Speed Axial Compressors Deppe, Andreas; Saathoff, Horst; Stark, Udo ISROMAC10-2004-048
ISROMAC 2004 Excitation of Torsional Vibrations in Cracked Rotating Shafts Bachschmid, Nicolo; Tanzi, Ezio ISROMAC10-2004-049
ISROMAC 2004 Control of the Rotordynamic Behavior of Mechanical Face Seals - Analytical and Experimental Results Dayan, Joshua; Green, Itzak; Zou, Min ISROMAC10-2004-052
ISROMAC 2004 Large Eddy Simulation of a Generic Fan and Far Field Noise Prediction Magagnato, F.; Sorgüven, E.; Gabi, M.; Müller, B. ISROMAC10-2004-054
ISROMAC 2004 Features of Tip Vortex Occurring in an Open Axial Rotor Shiomi, Norimasa; Kaneko, Kenji; Cai, Wen-Xin; Setoguchi, Toshiaki ISROMAC10-2004-057
ISROMAC 2004 Combined Cycle with Integrated Sewage Sludge Combustion (CISCO) Leithner, Reinhard; Aronis, Nikolaos; Garcia-Gutterez, Miguel ISROMAC10-2004-058
ISROMAC 2004 Numerical Simulation of the Transitional and Unsteady Flow Through a Low Pressure Turbine Skoda, Romuald; Schilling, Rudolf; Schobeiri, Meinhard T. ISROMAC10-2004-059
ISROMAC 2004 Optimization of a Rotor-Bearing System with an Evolutionary Algorithm Angantyr, Anders; Aidanpää, Jan-Olov ISROMAC10-2004-060
ISROMAC 2004 Numerical and Experimental Investigations on Cross-Flow Fans Gabi, Martin; Klemm, Toni ISROMAC10-2004-061
ISROMAC 2004 Nonlinear Dynamics due to Loss of Contact in Preloaded Spherical Roller Thrust Bearings Karlberg, Magnus N. E.; Aidanpää, Jan-Olov ISROMAC10-2004-062
ISROMAC 2004 Numerical Flow Simulation of Waterjet with Rotor-Stator Interaction Jang, J.H.; Park, Wang-Gyu; Boo, J.S.; Chun, H.H.; Kim, M.C. ISROMAC10-2004-063
ISROMAC 2004 Average Flow Analysis in a Multistage Helico-Axial Pump Vilagines, R.; Akhras, A.; Pagnier, Ph.; Falcimaigne, J. ISROMAC10-2004-065
ISROMAC 2004 Statistical Model for Turning Angle Determination of Compressor Tandem Cascade Nezym, Vitaliy Yu; Gomez-Mancilla, Julio; Korkishko, Sergey V. ISROMAC10-2004-066
ISROMAC 2004 Component Matching Analysis for a Twin Spool Turbofan Flack, Ron ISROMAC10-2004-067
ISROMAC 2004 A New Hybrid Frequency-Time Domain Method for the Forced Vibration of Elastic Structures with Friction and Intermittent Contact Poudou, Olivier; Pierre, Christophe; Reisser, Bertrand ISROMAC10-2004-068
ISROMAC 2004 Numerical Analysis of Turbulent Flows over Vibrating Blades with Positive Interblade Phase Angle Yang, Shih-Ying ISROMAC10-2004-069
ISROMAC 2004 The Flow Behavior Upstream of the Impeller Inlet of Mini Turbo Pumps Luo, Xianwu; Nishi, Michihiro; Yoshida, Kouichi; Dohzono, Hitoshi; Miura, Ken ISROMAC10-2004-070
ISROMAC 2004 An Experimental Study of the Incidence Angle Effect on Single-Stage Axial-Type Turbine Performance Cho, Soo-Yong; Kim, Eun-Jong ISROMAC10-2004-071
ISROMAC 2004 Active Stability Control of the Compression System in a Twin-Spool Turbofan Engine by Air Injection Scheidler, Stephan G.; Mundt, Christian; Mettenleiter, Manuel; Hermann, Jakob; Hiller, Sven-Jürgen ISROMAC10-2004-073
ISROMAC 2004 The Influence of Repeated Transient Heat Transfer Tests on the Measurement Accuracy Pape, Detlef; Weigand, Bernhard ISROMAC10-2004-074
ISROMAC 2004 Online-Diagnosis of Thermal Power Plants using Preliminary Balancing Calculations Reiss, Dietmar ISROMAC10-2004-076
ISROMAC 2004 Detection of the Onset of Cavitation in Automotive Torque Converters using Nearfield Acoustical Measurements Kowalski, Darin; Anderson, Carl; Blough, Jason ISROMAC10-2004-077
ISROMAC 2004 Experimental Investigation of Impeller-Diffuser Interaction Phenomena in a Centrifugal Compressor Niehuis, Reinhard; Ziegler, Kai U.; Ubben, Stefan ISROMAC10-2004-078
ISROMAC 2004 Comparison of Two Types of Nozzles in a Small Radial Steam Turbine - Experimental Investigation Kobayashi, Toshiyuki; Kanemura, Toshikatu; Nakayama, Yoshihiro; Mitsuda, Masahiko ISROMAC10-2004-079
ISROMAC 2004 Experimental and Theoretical Study on Swirl Braked Labyrinth Seal Iwatsubo, Takuzo; Iwasaki, Yasuhisa ISROMAC10-2004-081
ISROMAC 2004 Adaptive Strategy of the Supersonic Turbulent Flow over a Backward-Facing Step Yang, Shih-Ying ISROMAC10-2004-082
ISROMAC 2004 Measurement Techniques Challenges and Results of the Clocking-Effect Experimental Investigations in a Two-Stage Low-Pressure Turbine Blaszczak, Jaroslaw; Krysinski, Jan; Smolny, Antoni ISROMAC10-2004-083
ISROMAC 2004 Computation of Flow and Heat Transfer in Rotating Smooth Channels with several Channel Aspect Ratios by a Reynolds Stress Turbulence Model Su, Guoguang; Chen, Hamn-Ching; Han, Je-Chin ISROMAC10-2004-084
ISROMAC 2004 Analysis of Unsteady Flow in a Vaned Diffuser Radial Flow Pump Ardizzon, Guido; Pavesi, Giorgio ISROMAC10-2004-085
ISROMAC 2004 Effect of Multiple Orifice on Pressure Drop in Compressible Pipe Flow Tanaka, Masanori; Matsuo, Shigeru; Setoguchi, Toshiaki; Kim, Heuy-Dong ISROMAC10-2004-088
ISROMAC 2004 Effect of Non-equilibrium Condensation on Characteristics of Axisymmetric Free Jets Tanaka, Masanori; Matsuo, Shigeru; Setoguchi, Toshiaki; Kenji, Kaneko; Kim, Heuy-Dong ISROMAC10-2004-089
ISROMAC 2004 Cross Coupling Effects of Lateral and Torsional Vibrations in Geared Coupled Rotors Pennacchi, Paolo; Vania, Andrea ISROMAC10-2004-093
ISROMAC 2004 Study of Rotor Vibration due to the Rubbing against Casing Watanabe, Yusuke; Shiraki, Kazuhiro; Awa, Keizo; Iwatsubo, Takuzo ISROMAC10-2004-095
ISROMAC 2004 Modelling of Spiral Vibrations due to Rub in Real Rotors Bachschmid, Nicolo; Pennacchi, Paolo; Vania, Andrea ISROMAC10-2004-096
ISROMAC 2004 Blade Vibration of Radial Inflow Micro Gas Turbines Guo, Shijie ISROMAC10-2004-097
ISROMAC 2004 Numerical Modelisation of the Flow in Centrifugal Pump. Volute Influence in Velocity and Pressure Fields Asuaje, Miguel; Bakir, Farid; Kouidri, Smaine; Kenyery, Frank; Rey, Robert ISROMAC10-2004-099
ISROMAC 2004 Study of the Modification of the Shock-Boundary Layer Interaction on an Isolated Airfoil by Slot Suction Hubrich, Klaus; Bölcs, Albin ISROMAC10-2004-100
ISROMAC 2004 The Influence of Magnetic Pull on the Stability of Generator Rotors Gustavsson, Rolf K.; Aidanpää, Jan-Olov ISROMAC10-2004-101
ISROMAC 2004 Numerical Investigation of e^N Method in Navier-Stokes Turbomachinery Flow Computations Hu, Jiasen; Fransson, Torsten H. ISROMAC10-2004-103
ISROMAC 2004 Influence of Preswirl and Rotation on Labyrinth Seal Leakage Denecke, Jens; Dullenkopf, Klaus; Wittig, Sigmar ISROMAC10-2004-105
ISROMAC 2004 Experimental Investigation of Condensation Processes in a Low-Pressure Wet Steam Model Turbine Using a Pneumatic-Optical Probe Su, Hailin; Eyb, Gerhard; Völker, Lutz; Messner, Joachim; Cai, Xiaoshu ISROMAC10-2004-106
ISROMAC 2004 Evaluation of High Temperature Heat Generation with Micro-Gasturbines Bouvy, Claude; Koepsell, Martin; Pfeiffer, Jörg ISROMAC10-2004-107
ISROMAC 2004 A Combined Numerical and Experimental Study of Heat Transfer in a Roughened Square Channel with 45° Ribs Taslim, Mohammed E.; Liu, Haidong ISROMAC10-2004-108
ISROMAC 2004 Monte Carlo Simulation of Testing of Angular Contact Bearings Used in Rotating Machines Vlcek, Brian L.; Hendricks, Robert C.; Zaretsky, Erwin Z. ISROMAC10-2004-109
ISROMAC 2004 Approximate Solution for Choked Flow in Gas Seal Pads Fleming, David P. ISROMAC10-2004-110
ISROMAC 2004 Reflection of Propagating Expansion Wave on a Two-Dimensional Concave Wall in a Tube Nakayma, Hiroyasu; Yasunobu, Tsuyoshi; Nakano, Toshihiro; Setoguchi, Toshiaki ISROMAC10-2004-111
ISROMAC 2004 Impact of Low Solidity Diffuser on Rotating Stall in Centrifugal Compressors: A Coupled Experimental/Numerical Approach Boncinelli, Paolo; Ferrara, Giovanni; Ferrari, Lorenzo; Baldassarre, Leonardo ISROMAC10-2004-114
ISROMAC 2004 The Design of the Ultrasonic Motor Stator Support with Finite Element Analysis Method Xu, Zhike; Hu, Minqiang; Jin, Long; Ye, Qinghua ISROMAC10-2004-115
ISROMAC 2004 An Experimental Study on Rubbing Diagnosis for Rotating Machines Shiohata, Koki; Nagasue, Gaku; Akiyama, Ryo ISROMAC10-2004-116
ISROMAC 2004 Effects of Low Reynolds Number on Wake-Generated Unsteady Flow of an Axial-Flow Turbine Rotor Matsunuma, Takayuki; Tsutsui, Yasukata ISROMAC10-2004-118
ISROMAC 2004 Novel High-Efficient Small Drive Concepts Using Permanent Magnetic Bias Fluxes Amrhein, Wolfgang; Silber, Siegfried; Huber, Michael; Reisinger, Martin; Jenckel, P.; Redemann, C. ISROMAC10-2004-119
ISROMAC 2004 Multiple Solutions in a Rub-Impact Jeffcott rotor Aidanpää, Jan-Olov ISROMAC10-2004-120
ISROMAC 2004 Some Design Modifications Enhancing Thrust Pad Bearing Operation Glavatskih, Sergei B. ISROMAC10-2004-121
ISROMAC 2004 Shield Effect of Axial-Flow Fans Applied on Heatsink Assembly Lin, Sheam-Chyun; Chuang, Fu-Sheng; Chou, Chien-An; Luo, Yu-Shan; Chou, Yung-Tai ISROMAC10-2004-122
ISROMAC 2004 An Integrated Experimental and Numerical Study of the Heatsink Assembly with Oblique Straight Fins Chuang, Fu-Sheng; Lin, Sheam-Chyun; Chou, Chien-An; Tsai, Lin-Chiun; Shen, Ming-Chiou; Chen, Hong-Long ISROMAC10-2004-123
ISROMAC 2004 Boundary Layer Separation on Low Pressure Turbine Blade Under Unsteady Flow Conditions Schobeiri, Meinhard T.; Ozturk, Burak ISROMAC10-2004-124
ISROMAC 2004 A Three Dimensional Thermofluid Analysis and Simulation of Flow, Temperature and Pressure Patterns in a Passive-Adaptive Compliant Finger Seal Braun, Minel J.; Deng, Dingfeng; Pierson, Hazel M.; Proctor, Margaret P.; Steinetz, Bruce M. ISROMAC10-2004-126
ISROMAC 2004 On-Line Vibration Monitoring of Ball Bearing Damage Using an Experimental Test Rig Choy, Fred K.; Wang, L.; Zhou, J.; Braun, Minel J. ISROMAC10-2004-127
ISROMAC 2004 A Combined CFD and Flow Network Approach for Simulation of Secondary Air System of Aero Engines Bhamidi, Prasad V. S. S. S.; Manavalan, Sethu V.; Rao, Nanjunda N. N.; Karthik, S.; Nagalakshmi, K. ISROMAC10-2004-128
ISROMAC 2004 Optimization in Turbomachinery Data Reduction Japikse, David; Oliphant, Kerry N.; Pelton, Robert J. ISROMAC10-2004-130
ISROMAC 2004 Opportunities in University Collaboration for Turbomachinery Development A Turbomachinery Perspective on Engineering Education Japikse, David ISROMAC10-2004-131
ISROMAC 2004 Optimization of Component Design and Re-Design Japikse, David; Platt, Michael J. ISROMAC10-2004-132
ISROMAC 2004 Uprating Possibilities of a High Performance Axial Compressor for Utility Gas Turbines Schulz, Klaus; Layachi, Yacine; Michaelsen, Christian; Comar, Douglas A.; Hermans, Gregory P. ISROMAC10-2004-136
ISROMAC 2004 Impact of Transonic Compressor Rotor Leading Edge Shape on the Shock Structure Near the Casing Hoeger, Martin; Engber, Martin; Bergner, Jörg ISROMAC10-2004-137
ISROMAC 2004 Systematic Investigation on Conjugate Heat Transfer Rates of Film-cooling Configurations Bohn, Dieter; Ren, Jing; Kusterer, Karsten ISROMAC10-2004-138
ISROMAC 2004 A Theoretical Study on the Optimization of the Balancing Planes Hanish, Giuma; Leung, P. S.; Datta, P. K. ISROMAC10-2004-139
ISROMAC 2004 Experimental Comparison of the Flow in the Passages of Two Inducers El Hajem, Mahmoud; Vassilev, A.; Champagne, J. Y.; Combes, Jean-François; Vilagines, Regis ISROMAC10-2004-140
ISROMAC 2004 Improving the Performance of a Single Stage Axial Flow Fan Adachi, Tsutomu; Sugita, Naohiro ISROMAC10-2004-141
ISROMAC 2004 Investigation of the Optimum Clocking Position in a Two Stage Axial Turbine Bohn, Dieter; Ausmeier, Sabine; Ren, Jing ISROMAC10-2004-144
ISROMAC 2004 Evaluation of Rotating Microsystems Brenner, Werner; Suemecz, Franz ISROMAC10-2004-145
ISROMAC 2004 Experimental Investigations on the Influence of Oil Inlet Pressure on the Stability of Wave Journal Bearing Stability Dimofte, Florin; Lambrulescu, Margareta Irina; Sawicki, Jerzy T. ISROMAC10-2004-146
ISROMAC 2004 Eigenfrequencies and Mode Shapes of Radial Turbine Blades: Single Blade Calculation vs. Entire Calculation Klaus, Michael; Schulz, Achmed; Wittig, Sigmar ISROMAC10-2004-148
ISROMAC 2004 An Analytical Description of Backward Whirl Caused by Rotor-Stator-Contact Ehehalt, Ulrich; Hochlenert, Daniel; Markert, Richard ISROMAC10-2004-152
ISROMAC 2004 New Rotor Materials for Advanced, High Efficiency Steam Turbine Plant Schubert, Florian; Ennis, Philip J.; Singheiser, Lorenz ISROMAC10-2004-153
ISROMAC 2004 Advanced Material Systems for Rotorblades in Gas Turbines Schubert, Florian; Mülders, Barbara; Herzog, Roland; Singheiser, Lorenz ISROMAC10-2004-154
ISROMAC 2004 Large-Eddy Simulation of Trailing Edge Blowing Krömer, Jens R.; Meinke, Matthias; Schröder, Wolfgang ISROMAC10-2004-156
ISROMAC 2004 Flow prediction for film cooling by Large-Eddy Simulation Guo, Xuyao; Schröder, Wolfgang; Meinke, Matthias ISROMAC10-2004-157
ISROMAC 2004 An Evaluation of Neural Networks for Meanline Model Development Japikse, Russell D.; Japiske, David; Pelton, Robert ISROMAC10-2004-159
ISROMAC 2004 Cladding, Drilling and Shaping of Aerospace and Power Plant Components by Laser Radiation Kreutz, Ernst W.; Willach, Jens; Kelbassa, Ingo; Backes, G.; Horn, A.; Keutgen, S.; Pirch, N.; Poprawe, R. ISROMAC10-2004-160
ISROMAC 2004 Development of Turbine Alignment Technic and Equipment Using Strain Gauge Kim, Seung Min; Kim, Seong Bong; Jung, Jae Won; Kim, Seung Tae ISROMAC10-2004-162
ISROMAC 2004 Output Feedback Control of an Active Tilting-Pad Journal Bearing Deckler, Daniel; Veillette, Robert; Braun, Minel; Choy, Fred ISROMAC10-2004-163
ISROMAC 2004 The study of mini Forward-Curved Centrifugal Fan Applied on the Thermal Management for Notebook Computers Huang, Chia-Lieh ISROMAC10-2004-164
ISROMAC 2004 Optical PIV and LDV Comparisons of Internal Flow Investigations in SHF Impeller Wuibaut, G.; Bois, G.; El Hajem, M.; Ahkras, A.; Champagne, J.Y. ISROMAC10-2004-165
ISROMAC 2006 CALCULATION OF A TURBINE BLADE AT HIGH REYNOLDS NUMBERS BY LARGE-EDDY SIMULATION Magagnato, F., Pritz, B., Gabi, M. Paper No. 87 Advanced CFD
ISROMAC 2006 DIRECT NUMERICAL SIMULATION OF TURBULENCE CHANNEL FLOW WITH THERMAL.STRATIFICATION TAKING INTO ACCOUNT DENSITY FLUCTUATION Mizobata, K., Kajishima, T., Ohta, T. Paper No. 91 Advanced CFD
ISROMAC 2006 THE EFFECTS OF REDUCED-COST MACHINING TECHNIQUES ON DIMENSIONAL TOLERANCES, POWERING, AND CAVITATION INCEPTION FOR A SUBMERSIBLE PROPULSOR Koncoski, J. J., Eaton, J. E., Yost, T. Paper No. 77 Cavitation and Propellers
ISROMAC 2006 A NEW METHOD FOR THE HYDRO-STABILITY IMPROVEMENT OF LARGE-SCALE FRANCIS WATER TURBINES Chang, J., Li, L. Paper No. 69 Cavitation and Propellers
ISROMAC 2006 A LINEAR REGRESSION MODEL FOR MARINE PROPELLER OPTIMIZATION PROTOTYPING AND DESIGN Liu, P., Wang H., Quinton, J., Veitch, B. Paper No. 85 Cavitation and Propellers
ISROMAC 2006 PREDICTION OF CAVITATION INTENSITY AND EROSION IN CENTRIFUGAL PUMP BASED ON DETAILED BUBBLE BEHAVIOR SIMULATED USING BUBBLE FLOW MODEL Fukaya, M., Tamura, Y., Matsumoto, Y. Paper No. 44 Cavitation and Propellers
ISROMAC 2006 DETERMINATION OF A MARINE PROPELLER THRUST USING A CFD CODE Rao, J. S., Saravanakumar, M. Paper No. 107 Cavitation and Propellers
ISROMAC 2006 A NUMERICAL TOOL FOR THE DESIGN/ANALYSIS OF DUAL-CAVITATING PROPELLERS Young, Y. L., Young T. Shen, Y. T. Paper No. 131 Cavitation and Propellers
ISROMAC 2006 NUMERICAL ANALYSIS ABOUT SUPPRESSION EFFECT OF TANDEM CASCADE ON CAVITATION INSTABILITIES Hiranuma, M., Iranuma, Y., Yoshida, Y., Ikohagi, T. Paper No. 55 Cavitation and Propellers
ISROMAC 2006 EXPERIMENTAL VERIFICATION OF BLADE-SHAPE OPTIMIZATION FOR IMPROVED OFF-DESIGN CAVITATION PERFORMANCE Dreyer, J. J., Koncoski, J. J., Zierke, W. C., Willits, S. M. Paper No. 144 Cavitation and Propellers
ISROMAC 2006 NUMERICAL ANALYSIS ON VELOCITY AND THERMAL FIELDS IN ROTATING DRUM DURING SPIN-DOWN PROCESS Torii, S., Yang, W. J., Iino, N. Paper No. 123 General Heat Transfer
ISROMAC 2006 TRANSIENT CONJUGATE HEAT TRANSFER ANALYSIS OF A LIQUID NITROGEN SEAL CHAMBER Rao, J. S., Saravanakumar, M. Paper No. 106 General Heat Transfer
ISROMAC 2006 EFFECTS OF CENTRIFUGAL BUOYANCY AND REYNOLDS NUMBER ON TURBULENT HEAT TRANSFER IN A TWO-PASS ANGLED-RIB-ROUGHENED CHANNEL WITH SHARP 180° TURNS INVESTIGATED BY USING LARGE EDDY SIMULATION Murata, A., Mochizuki, S. Paper No. 93 Turbine Internal Heat Transfer
ISROMAC 2006 EXPERIMENTAL STUDY OF ROTATION EFFECTS ON HEAT/MASS TRANSFER IN A SMOOTH CHANNEL WITH BLEED HOLES Kim, K. M., Kim, S. I., Jeon, Y. H., Lee, D. H., Cho, H. H. Paper No. 71 Turbine Internal Heat Transfer
ISROMAC 2006 A NEW STATISTICAL-BASED CORRELATION FOR THE RIB FIN EFFECTS ON THE OVERALL HEAT TRANSFER COEFFICIENT IN A RIB-ROUGHENED COOLING CHANNEL Taslim, M. E., Nezym, V. Paper No. 122 Turbine Internal Heat Transfer
ISROMAC 2006 DETAILED HEAT/MASS TRANSFER MEASUREMENTS ON STATIONARY BLADE WITH VARIOUS RELATIVE POSITIONS Rhee, D. H., Cho, H. H. Paper No. 108 Turbine External Heat Transfer
ISROMAC 2006 INFLUENCE OF MAINSTREAM INCIDENCE ANGLE ON LEADING EDGE FILM COOLING MEASURED BY THE TRANSIENT LIQUID CRYSTAL TECHNIQUE Wagner, G., Ott, P., Vogel, G. Paper No. 127 Turbine External Heat Transfer
ISROMAC 2006 INFLUENCE OF PRODUCTION-CAUSED DEVIATIONS IN COOLING HOLE GEOMETRY ON THE COOLING EFFICIENCY OF A TRANSPIRATION COOLED MULTI-LAYER PLATE Bohn, D., Krewinkel, R. Paper No. 15 Turbine External Heat Transfer
ISROMAC 2006 CONJUGATE PREDICTION OF LEADING EDGE FILM COOLING AND HEAT TRANSFER Gao, Z., Yang, H., Wright, L., Han, J. C. Paper No. 45 Turbine External Heat Transfer
ISROMAC 2006 COMBINED EFFECTS OF TURBULENCE INTENSITY AND PERIODIC UNSTEADY WAKE FLOW CONDITION ON BOUNDARY LAYER SEPARATION AND REATTACHMENT ALONG THE SUCTION SURFACE OF A LOW PRESSURE TURBINE BLADE M. T. Schobeiri, M. T., Öztürk, B. Paper No. 114 Turbine External Heat Transfer
ISROMAC 2006 ON THE PREDICTION OF FILM COOLING WITH COMPOUND ANGLE INJECTION USING A 3D FEATURE-BASED JET MODEL Burdet, A., Abhari, R. S. Paper No. 24 Turbine External Heat Transfer
ISROMAC 2006 DEVELOPMENT of HIGH MISALIGNMENT SEGMENTED CIRCUMFRENTIAL CARBON SEALS for GEARED TURBO FAN AIRCRAFT ENGINES Dobek, L. J., Shaughnessy, D. E., Vasagar, M., Findley Jr.,, D. R. Paper No. 115 Seals
ISROMAC 2006 SEAL INVESTIGATIONS OF AN ACTIVE CLEARANCE CONTROL SYSTEM CONCEPT Steinetz, B. M., Taylor, S., Oswald, J., DeCastro, J. A. Paper No. 120 Seals
ISROMAC 2006 NUMERICAL SIMULATION OF FINGER SEAL COMPLIANCE THROUGH AN INTEGRATED FLUID-SOLID MODEL Braun, M. J., Li, H. Paper No. 18 Seals
ISROMAC 2006 AN EXPERIMEMTNAL INVESTIGATION OF A NON-CONTACTING FINGER SEAL Braun, M. J., Marie, H., Li, H. Paper No. 19 Seals
ISROMAC 2006 GAS SEAL PAD WITH HERRINGBONE-GROOVED ROTOR – STIFFNESS AND LOAD CAPACITY Fleming, D. P. Paper No. 43 Seals
ISROMAC 2006 COMPLIANT TURBOMACHINE SEALING Hendricks, R. C., Braun, M. J., Deng, D., Hendricks, J. A. Paper No. 54 Seals
ISROMAC 2006 INTERFACES—WEAK LINKS, YET GREAT OPPORTUNITIES Hendricks, R. C., Dimofte, F., Chupp, R. E., Steinetz, B. M. Paper No. 140 Seals
ISROMAC 2006 AN INVESTIGATION OF PRESSURE STIFFNESS COUPLING IN BRUSH SEALS Aksit, M. F., Dogu, Y., Kandemir, L., Huseuin, L. K. Paper No. 4 Seals
ISROMAC 2006 EFFECTS OF PIVOT LOCKING ON THE OPERATING CHARACTERISTICS OF A TILTING PAD JOURNAL BEARING WITH BALL AND SOCKET PIVOTS Flack, R., Brechting, B., He, M., Barrett, L. Paper No. 134 Bearings
ISROMAC 2006 HIGH SPEED AIR BEARING TEST RIG WITH MAGNETIC BEARING SUPPORTS Dimofte F., Ene N., Moraru, L., Cioc, S., Cioc, C., Afjeh, A., Keith, Jr., T. G. Paper No. 36 Bearings
ISROMAC 2006 CASE HISTORY OF FAULT IDENTIFICATION IN 350 MW STEAM TURBOGENERATORX Mazur, Z. Muñoz-Quezada, R. Paper No. 90 Gas and Steam Turbines
ISROMAC 2006 STUDY OF LEAKAGE FLOWS FOR A FIRST VANE IN A GAS TURBINE S. Hada1, S., Thole, K. A. Paper No. 52 . Gas and Steam Turbines
ISROMAC 2006 UNSTEADY INVESTIGATION OF THE AERO-THERMAL FLOW FIELD IN A HP GAS TURBINE Adami, P., Salvadori, S., Martelli, F. Paper No. 1 Gas and Steam Turbines
ISROMAC 2006 INFLUENCE OF THE RADIAL GAP ON THE FLOW FIELD OF A 2-STAGE TURBINE WITH SHROUDED BLADINGS Bohn, D., Tümmers, C., Sell, M. Paper No. 14 Gas and Steam Turbines
ISROMAC 2006 MATCHING OF THREE COMPONENTS OF A TORQUE CONVERTER Flack, R. Paper No. 41 Special Turbomachines
ISROMAC 2006 PERFORMANCE CHARACTERISTICS ON A PARTIALLY ADMITTED SMALL AXIAL-TYPE TURBINE WITH VARIOUS SOLIDITIES AND FLOW ANGLES Soo-Yong Cho, S. Y., Choi, S. K., Cho, C. H. Paper No. 28 Special Turbomachines
ISROMAC 2006 EXPERIMENTAL INVESTIGATION OF A SMALL-SCALE CROSS-FLOW FAN FOR AIRCRAFT PROPULSION Gannon, A., Utschig, J. M., Hobson, G. V., Max F. Platzer, M. F. Paper No. 56 Special Turbomachines
ISROMAC 2006 INVESTIGATION OF FANS FOR VENTILATION SYSTEMS IN AUTOMOBILES Klemm, T., Gabi, M. Paper No. 76 Special Turbomachines
ISROMAC 2006 A SIMPLIFIED METHOD FOR PREDICTING THE STABILITY OF AERODYNAMICALLY EXCITED TURBOMACHINERY Storace, A. F. Paper No. 121 Self Excited Vibrations
ISROMAC 2006 AERODYNAMIC DAMPING EFFECTS ON MISTUNED BLADED-DISC RESONANT RESPONSE Fleeter, S., Choi, Y. S. Paper No. 44 Self Excited Vibrations
ISROMAC 2006 EFFECT OF INLET GEOMETRY ON THE FLOW FIELDS AROUND ROTOR IN A SMALL AXIAL FAN Shiomi, N., Kaneko, K. Paper No. 119 Axial Machines
ISROMAC 2006 INFLUENCE OF THE LEAKAGE FLOW TANGENTIAL VELOCITY ON THE LEAKAGE FLOW KINEMATICS AND LOSS GENERATION IN SHROUDED AXIAL COMPRESSOR CASCADES Sohn, D. W., Kim, T., Song, S. J. Paper No. 73 Axial Machines
ISROMAC 2006 IMPACT OF A FILLET ON DIFFUSING VANE ENDWALL FLOW STRUCTURE Hoeger, M., Baier, R. D., Müller, R. Paper No. 57 Axial Machines
ISROMAC 2006 INNER WORKINGS OF SHROUDED AND UN-SHROUDED TRANSONIC FAN BLADES Wadia, A. R., Szucs, P. N. Paper No. 126 Axial Machines
ISROMAC 2006 DEVELOPMENT OF A RING STALL IN A TRANSONIC COMPRESSOR HAH, C., Bergner, J., Hennecke, D. K., Schiffer, H. P. Paper No. 53 Axial Machines
ISROMAC 2006 SIMULTTANEOUS MEASUREMENT FOR THE AERODYNAMIC NOISE AND PERFORMANCE OF A FORWARD-CURVED CENTRIFUGAL FAN WITH ?/4 RESONATOR Chen, W. L., Lin, S. C., Shen, M. C. Paper No. 27 Centrifugal Machines
ISROMAC 2006 MICRO CENTRIFUGAL COMPRESSOR FOR ULTRA MICRO GAS TURBINE Hirano, T., Koizumi, Y., Tanida, K. Paper No. 135 Centrifugal Machines
ISROMAC 2006 MULTISTAGE CENTRIFUGAL PUMPS ANALYSIS: ASSESSMENT OF A CFD APPROACH Della Gatta, S., Adami, P., Martelli, F. Paper No. 2 Centrifugal Machines
ISROMAC 2006 NUMERICAL STUDY ON PRESSURE FLUCTUATIONS IN A COMPLETE STAGE OF A CENTRIFUGAL PUMP Benra, F. K., Feng, J., Dohmen, H. J. Paper No. 12 Centrifugal Machines
ISROMAC 2006 EXPERIMENTAL AND THEORETICAL ANALYSIS OF A CENTRIFUGAL PUMP DURING FAST STARTING PERIOD Dazin, A., Caignaert, G., Bois, G. Paper No. 31 Centrifugal Machines
ISROMAC 2006 A COUPLED EXPERIMENTAL/NUMERICAL ANALYSIS FOR LOW SOLIDITY VANED DIFFUSERS PERFORMANCE OPTIMIZATION Boncinelli, P., Ferrara, G., Ferrari, L., Baldassarre, L. Paper No. 17 Centrifugal Machines
ISROMAC 2006 REYNOLDS NUMBER EFFECTS ON THE PERFORMANCE CHARACERISTICS OF A SMALL REGENERATIVE PUMP Kang, S. H., Ryu, S. H. Paper No. 109 Centrifugal Machines
ISROMAC 2006 ANALYSIS OF 3-D TURBULENT FLOW AND FORCES ACTED ON A CENTRIFUGAL PUMP BY A NUMERICAL SIMULATION Huang, S., Liu, P. Paper No. 143 Centrifugal Machines
ISROMAC 2006 EFFECTIVE TWO-ZONE MODELING OF DIFFUSERS AND RETURN CHANNEL SYSTEMS FOR RADIAL AND MIXED-FLOW PUMPS AND COMPRESSORS Japikse, D., Bitter, J. Paper No. 66 Centrifugal Machines
ISROMAC 2006 MODEL-BASED IDENTIFICATION OF THE SHAFT LOCAL BOWS CAUSED BY ROTOR-TO-STATOR CONTACTS IN A STEAM TURBINE Pennacchi, P., Vania, A. Paper No. 103 Rotordynamics
ISROMAC 2006 COMPARISON OF STATIC AND DYNAMIC CHARACTERISTICS OF THE STAIGHT AND THE STEPPED TYPE LABYRINTH SEAL Iwatsubo, T., Matsuda, M. Paper No. 65 Rotordynamics
ISROMAC 2006 EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC FORCES FOR DIFFERENT CONFIGURATIONS OF SINGLE-BLADE CENTRIFUGAL PUMPS Benra, F. K., Dohmen, H. J., Sommer, M. Paper No. 11 Rotordynamics
ISROMAC 2006 FAULT IDENTIFICATION IN ROTOR DYNAMICS USING ROBUST ESTIMATION BASED ON M-ESTIMATORS AND THE MACHINE MODEL Pennacchi, P., Vania, A., Bachschmid, N. Paper No. 101 Rotordynamics
ISROMAC 2006 NON PARAMETRIC COMPLEX DATA ANALYSIS USED IN CONDITION MONITORING OF ROTATING MACHINERY Pennacchi, P., Vania, A. Paper No. 102 Rotordynamics
ISROMAC 2006 EXPERIMENTAL VALIDATION OF VARIOUS MOTION PATTERNS AT ROTOR STATOR CONTACT Ehehalt, U., Hahn, E., Markert, R. Paper No. 37 Rotordynamics
ISROMAC 2006 STATIONARY SOLUTIONS AND TRANSITION CONDITIONS FOR THE NON-SMOOTH MOTION OF ROTOR SYSTEMS WITH UNILATERAL CONSTRAINTS Waltersberger, B., Wauer, J. Paper No. 128 Rotordynamics
ISROMAC 2006 STABILITY ANALYSIS OF INTERNALLY DAMPED ROTATING COMPOSITE SHAFTS CONSIDERING TRANSVERSAL SHEAR Sino, R., Chatelet, E., Nouri-Baranger, T., Jacquet, G. Paper No. 26 Rotordynamics
ISROMAC 2006 STUDY OF SELF-EXCITED VIBRATION OF ROTOR AND CASING DUE TO DRY FRICTION Watanabe, Y., Kami, Y., Iwatsubo, T. Paper No. 130 Rotordynamics
ISROMAC 2006 ROTOR-STATOR NODAL DIAMETER MODE INTERACTION BY MEANS OF CONTACT IN AN AIRCRAFT ENGINE Legrand, M., Idoux, L., Pierre, C., Cartraud, P. Paper No. 83 Rotordynamics
ISROMAC 2006 ORDER-TUNED AND IMPACT ABSORBERS FOR ROTATING FLEXIBLE STRUCTURES Shaw, S. W., Olson, B. J., Pierre, C. Paper No. 116 Rotordynamics
ISROMAC 2006 EXPERIMENTAL DETERMINATION OF FATIGUE LIVES OF ROTATING ALUMINUM ALLOYS USING WEIBULL ANALYSIS Vlcek, B. L. Hendricks, R. C., Zaretsky, E. V., Parker, J. Paper No. 125 Rotordynamics
ISROMAC 2006 PROBABILISTIC APPROACH IN ROTORDYNAMICS Becker, K. H. Paper No. 9 Rotordynamics
ISROMAC 2006 MODELING OF POWER LOSS WITH HEAT GENERATION IN CVT USING METAL V-BELT AT STEADY STATE Shinagawa, Y., Okubo, K., Fujii, T. Paper No. 117 Rotordynamics
ISROMAC 2006 CONTROL OF A RUBBING ROTOR - EXPERIMENTS AND THEORY Ginzinger, L., Ulbrich, H. Paper No. 46 Rotordynamics
ISROMAC 2006 ON THE KINEMATICS AND KINETICS OF MECHANICAL SEALS, ROTORS, AND WOBBLING BODIES Green, I Paper No. 49 Rotordynamics
ISROMAC 2006 FREE BODY DYNAMICS OF A SPINNING CYLINDER WITH PLANAR RESTRAINT — (A.K.A. BARREL OF FUN)—PART II Moraru, L., Dimofte, F., Hendricks, R. C. Paper No. 138 Rotordynamics
ISROMAC 2006 ELASTIC BEHAVIOR OF SHAFTS AFFECTED BY SLIGHTLY HELICOIDAL CRACKS Bachschmid, N., Tanzi, E. Paper No. 8 Rotordynamics
ISROMAC 2006 NUMERICAL INVESTIGATION OF TRANSIENT STATE OF DEVELOPING FLOWS IN A ROTATING CHANNEL Inoue, Y. Kajishima, T. Paper No. 62 Rotating Flows
ISROMAC 2006 3D INVESTIGATIONS OF THE FLOW FIELD IN PRE-SWIRLED COOLING AIR DELIVERY SYSTEMS Bricaud, C., Dullenkopf, K., Bauer, H. J. Paper No. 23 Rotating Flows
ISROMAC 2006 ASSESSMENT OF EXPERIMENTAL AND NUMERICAL FLOW INVESTIGATION IN ROTATING-DISC SYSTEMS D’Haudt, E. Della Gatta, S., Debuchy, R., Bois, G., Martelli, F. Paper No. 16 Rotating Flows
ISROMAC 2006 AERODYNAMIC DRAG CHARACTERISTICS AND SHAPE DESIGN OF A RADAR ANTENNA USED FOR AIRPORT GROUND TRAFFIC CONTROL Gumusel, B., Kavurmacioglu, L., Camci, C. Paper No. 132 Rotating Flows
ISROMAC 2006 3D TIP FLOW CHARACTERISTICS AND VORTEX SHEDDING FROM A RADAR ANTENNA USED FOR AIRPORT GROUND TRAFFIC CONTROL Gumusel1, B., Kavurmacioglu, L., Camci, C. Paper No. 145 Rotating Flows
ISROMAC 2006 FLOW AROUND HELICOPTER BLADE TIP SECTIONS USING A 2D PARTICLE IMAGE VELOCIMETER - PART I Kahveci1, H. S., Camci, C. Paper No. 136 Rotating Flows
ISROMAC 2006 FLOW AROUND HELICOPTER BLADE TIP SECTIONS USING A (3D) STEREOSCOPIC PARTICLE IMAGE VELOCIMETER - PART II Kahveci1, H. S., Camci, C. Paper No. 137 Rotating Flows
ISROMAC 2006 EXPERIMENTAL INVESTIGATIONS ON LEAN PREMIXED PREVAPORIZED COMBUSTORS FORSMALL AEROENGINES Hupfer, A., Rott, C., Kau, H. P. Paper No. 61 Combustors
ISROMAC 2006 HEAT TRANSFER ENHANCEMENT BY IMPINGEMENT COOLING FOR COMBUSTOR LINERS Lauffer, D., Weigand, B., Wolfersdorf, J., Liebe, R. Paper No. 35 Combustors
ISROMAC 2006 THERMAL PERFORMANCE OF ENHANCED COMBUSTOR LINER IMPINGEMENT COOLING SCHEMES Gritsch, M., Schönwälder, D., Estaun-Echavarren, C. Paper No. 50 Combustors
ISROMAC 2006 FUTURE FUEL SCENARIOS AND THEIR POTENTIAL IMPACT TO AVIATION Hendricks, R. C., Lowery, N., Daggett, D. L., Anast, P. Paper No. 139 Combustors
ISROMAC 2006 CAN WATER-INJECTED TURBOMACHINES PROVIDE COST-EFFECTIVE EMISSIONS AND MAINTENANCE REDUCTIONS Hendricks, R. C., Daggett, D. L., Shouse, D. T., Roquemore, W. M., Brankovic, A., Ryder, R. C. Paper No. 141 Combustors
ISROMAC 2006 MODELING THE PIEZOELECTRIC EXCITATION IN A BAR-TYPE MOTOR Gutschmidt, S., Hagedorn, P. Paper No. 51 Electric Machines
ISROMAC 2006 LMI GAIN-SCHEDULED H CONTROL OF INSTATIONARY FLEXIBLE ROTOR/MAGNETIC BEARING SYSTEMS Schlotter, M., Keogh, P. Paper No. 112 Magnetic Bearings
ISROMAC 2006 EXPERIMENTAL AND COMPUTATION INVESTIGATION OF THE ROTATING INSTABILITY IN A CENTRIFUGAL PUMP IMPELLER Pavesi, G., Ardizzon, G., Cavazzini, G. Paper No. 100 Stall and Surge
ISROMAC 2006 A PRESSURE OUTPUT FEEDBACK CONTROL OF COMPRESSOR SURGE WITH A THRUST MAGNETIC BEARING ACTUATOR Ahn, H. J., Park, M. S., Sanadgol, D., Han D. C., Maslen, E. H. Paper No. 3 Stall and Surge
ISROMAC 2006 DEVELOPMENT OF THE FAST-RESPONSE TOTAL PRESSURE PROBE FOR TURBOMACHINERY APPLICATION Kang, J. S., Cha, B. J., Yang, S. S. Paper No. 70 Instrumentation
ISROMAC 2006 EVALUATION OF PERFORMANCE AND OPERATING CHARACTERISTICS OF A MICRO GAS TURBINE BY DETAILED MEASUREMENT Lee, J. J., Kim, T. S., Sohn, J. L. Paper No. 72 Instrumentation
ISROMAC 2006 INFLUENCE OF MODESHAPE MISTUNING ON THE FORCED RESPONSE OF A TURBINE CASCADE Beretta, A., Kahl, G., Ott, P. Paper No. 13 Forced Response
ISROMAC 2006 AN EFFICIENT DISK DESIGN OPTIMIZATION PROCESS FOR LIMITING MISTUNED BLADE VIBRATION AND STRESS LEVELS IN TURBINE ENGINE ROTORS Baik, S., Castanier, M. P., Pierre, C. Paper No. 110 Forced Response
ISROMAC 2006 ONE-DIMENSIONAL MODELING OF ROTOR STATOR INTERACTION IN FRANCIS PUMP-TURBINE Nicolet, C., Ruchonnet, N., Avellan, F. Paper No. 94 Hydraulic Turbines
ISROMAC 2008 EXAMINATION OF STATOR CLOCKING IN A 3 STAGE AXIAL COMPRESSOR AT DESIGN POINT AND OFFDESIGN POINT OPERATION K. THEOBALD, H. HONEN 27
ISROMAC 2008 PROPOSING A NOVEL APPROACH IN PLANT DESIGN : THE COMBINED CALCULATION OF POWER PLANT PROCESSES AND COMPONENT STRESS D. BOHN, R. KREWINKEL, Chr. RAKUT 8
ISROMAC 2008 A METHOD BASED ON POTENTIAL FLOW THEORY FOR ESTIMATING INGESTION INTO CAVITIES IN FRONT OF AIRFOILS theory for IN THE ANNULUS PATH A.O. SCHWIENTEK, H.S. GOMAA, B. WEIGAND, J. VON WOLFERSDORF 15
ISROMAC 2008 NO VIBRATION - NO PROBLEM : OR IS THERE ? D. BENTLY G. RICHARD THOMAS 40
ISROMAC 2008 SIMULATION OF CASING TREATMENTS OF A TRANSONIC COMPRESSOR STAGE M. HEMBERA, H.P. KAU, E. JOHANN 42
ISROMAC 2008 TURBOMACHINERY OF EFFICIENT IGCC FOR BROWN COALS M. STASTNY, D. HANUS, Z. HRDINA, J. KUCERA, J. POLANSKY 107
ISROMAC 2008 ANALYSIS OF GAS TURBINE ROTATING CAVITIES BY A ONE-DIMENSIONAL MODEL L. INNOCENTI, M. MICIO, R. DA SOGHE, B. FACCHINI 161
ISROMAC 2008 MODEL-UPDATING FOR VIBRATING SYSTEMS P. LANCASTER 240
ISROMAC 2008 EXPERIMENTAL INVESTIGATION OF ROTATING STALL IN A TWOSTAGE AXIAL-FLOW COMPRESSOR F. NURZIA, C. PALOMBA, P. PUDDU 69
ISROMAC 2008 PERFORMANCE IMPROVEMENT OF GAS TURBINE FOR THE 3rd UNIT OF KAWASAKI THERMAL POWER PLANT WITH FUEL CHANGEING H.KUWAZAWA, K. KAMESHIMA, H.KURIYAMA, H. FUKUSHIMA 127
ISROMAC 2008 ON THE FLOW BEHAVIOUR IN ROTOR-STATOR SYSTEM WITH SUPERIMPOSED FLOW R. DEBUCHY, F. ABDEL NOUR, G. BOIS 10
ISROMAC 2008 IDENTIFICATION OF RAILWAY WHEEL DEFECTS IN TIME SIGNAL & WAVELET TRANSFORM S.K.SINHA N.DHARMARAJU, A. RAMA RAO 221
ISROMAC 2008 ANALYTICAL MODEL FOR THE CHARACTERIZATION OF THE DYNAMIC TRANSFER MATRIX OF CAVITATING INDUCERS A. CERVONE, Y. TSUJIMOTO, Y. KAWATA 56
ISROMAC 2008 THE ROTOR-TO-ROTOR CLOCKING INFLUENCE ON NOISE REDUCTION OF A TWOSTAGE TURBINE J.R. BLASZCZAK, E. KUS 193
ISROMAC 2008 EFFECT OF SLOT GAP WIDTH ON TURBINE BLADE PLATFORM FILM COOLING WITH UPSTREAM SECONDARY FLOW S.A. BLAKE, D.H. RHEE, J. GRIZZLE, J.C. HAN 47
ISROMAC 2008 ROTORDYNAMICS AND UNCERTAINTY OF VARIABLES IN GAS TURBINE K.H. BECKER 18
ISROMAC 2008 INTERACTION BETWEEN UNEVEN CAVITY LENGTH AND SHAFT VIBRATION AT THE INCEPTION OF SYNCHRONOUS ROTATING CAVITATION Y. YOSHIDA, Y. KAZAMI, K. NAGAURA, M. SHIMAGAKI, Y. IGA, T. IKOHAGI 140
ISROMAC 2008 A NOISE REDUCTION MEHTOD FOR VIBRATION MEASUREMENT ON ROTATING MACHINERIES M. KARLBERG 114
ISROMAC 2008 NUMERICAL SIMULATION OF FILM COOLING EFFECTIVENESS ON FLAT PLATE Z. TAO, N. LIU, S.T. DING, G.Q. XU, H.W. WU, J. WEN 148
ISROMAC 2008 SPOKE CENTERING ECCENTRICITY - STATISTICAL TOLERANCE ANALYSIS A.K. STUMVOLL, J. WITTMER, H.P. KAU 25
ISROMAC 2008 OCCURENCE RANGE OF A ROTATING-STALL-TYPE PHENOMENA IN A HIGH HEAD LIQUID HYDROGEN INDUCER M. UCHIUMI, K. KAMIJO 157
ISROMAC 2008 AERO-ACOUSTIC INSTALLATION EFFECTS IN COOLING FAN SYSTEMS PART 1 : SCATTERING BY SURROUNDING SURFACES M. ROGER, S. MOREAU 222
ISROMAC 2008 EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FILM COOLING EFFECTIVENESS AND HEAT TRANSFER COEFFICENT FOR CYLINDRICAL INJECTION HOLES I. KOC Y. ISLAMOGLU 110
ISROMAC 2008 ADDED MASS EFFECTS IN HYDRAULIC TURBINES Q. LIANG, C. VALERO, E. EGUSQUIZA, X. ESCALER, U. SEIDEL 48
ISROMAC 2008 EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF LEADING EDGE CAVITATION IN A HELICOCENTRIFUGAL PUMP D. PIERRAT, L. GROS, G. PINTRAND, B. LE FUR, Ph. GYOMLAI 74
ISROMAC 2008 AERO-ACOUSTIC INSTALLATION EFFECTS IN COOLING FAN SYSTEMS PART 2 : NEAR-FIELD AND GROUND EFFECTS S. MOREAU, O. MARCK, M. ROGER 223
ISROMAC 2008 DETECTION AND ANALYSIS OF AZIMUTHAL MODES IN A CENTRIFUGAL IMPELLER D. WOLFRAM, Th. CAROLUS 59
ISROMAC 2008 EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE RADIAL THRUST IN A CENTRIFUGAL PUMP J.F. COMBES, A.BOYER, L. GROS, D. PIERRAT, G. PINTRAND, P. CHANTREL 44
ISROMAC 2008 EXPERIMENTAL INVESTIGATION AND NUMERICAL PREDICTION OF THE PERFORMANCE OF A CROSS-FLOW FAN H.T. YU, HOBSON, G.V. GANNON, J. ANTHONY, PLATZER M. 41
ISROMAC 2008 CFD SIMULATION OF THE UNSTEADY FLOW AND AEROACOUSTIC NOISE GENERATED BY A CENTRIFUGAL FAN M. YOUNSI, F. BAKIR, S. KOUIDRI, R. REY, T. BELAMRI, F. MENTER 23
ISROMAC 2008 A GENERAL PURPOSE TEST FACILITY FOR EVALUATING GAS LUBRICATED JOURNAL BEARINGS B. ERTAS, M. DREXEL, J. VAN DAM, D. HALLMAN 207
ISROMAC 2008 EFFECT OF IMPELLER AND VOLUTE DESIGN ON THE PERFORMANCE OF A MINIATURE ROTARY SHAFT PUMP (RSP) G. PAVESI, G. ARDIZZON, A. ROSSETTI 136
ISROMAC 2008 NUMERICAL STUDIES ON THE INFLUENCE OF THE INCLINE OF CYLINDRICAL BLADING ON THE FLOW IN CENTRIFUGAL PLUGIN FANS A. WILLBURGER, M. LAWERENZ 61
ISROMAC 2008 EFFECT OF THE UNSTEADINESS ON THE DIFFUSER FLOW IN A TRANSONIC CENTRIFUGAL COMPRESSOR STAGE N. BULOT and I. TREBINJAC 132
ISROMAC 2008 DYNAMIC COEFFICIENTS FOR SQUEEZE FILM DAMPER USING FULL 3-D NAVIERSTOKES EQUATION XING C., BRAUN M.J., LI H. 203
ISROMAC 2008 CAVITATION INCEPTION IN FAST STARTUP S. DUPLAA , O. COUTIER-DELGOSHA, A. DAZIN, G. BOIS, G. CAIGNAERT, O. ROUSSETTE 14
ISROMAC 2008 DESIGN OF A CENTRIFUGAL FAN FOR AIR CUSHION VEHICLE Y.T.LEE, V. AHUJA, A. HOSANGADI, L. MULVIHILL, R. COLEMAN, R. BIRKBECK 250
ISROMAC 2008 DEVELOPMENT OF A SECTOR TEST RIG FOR MULTISTAGE RADIAL COMPRESSOR STATORS M.B. SCHMITZ, A. SIMPSON, C. AALBURG, V. MICHELASSI 254
ISROMAC 2008 DRIVING A RADIAL MAGNETIC BEARING WITH THREE-LEG VOLTAGE CONVERTER H.J. AHN, D.C. HAN 253
ISROMAC 2008 NUMERICAL INVESTIGATIONS OF THE CAVITATING FLOW ON TWO-DIMENSIONAL HYDROFOILS : PHYSICAL MODELING METHODOLOGIES S. FRIKHA , O. COUTIER-DELGOSHA, J.A. ASTOLFI 38
ISROMAC 2008 A STUDY ON SENSOR SELECTION FOR EFFICIENT JET ENGINE HEALTH MONITORING S. BORGUET, O. LEONARD 72
ISROMAC 2008 AXIAL-FLOW GAS TURBINE MODELING WITH A 2- DIMENSIONAL THROUGHFLOW CALCULATION FOR STEADY-STATE ANALYSIS OF POWER CONVERSION SYSTEM IN A GASCOOLED REACTOR J.H. KIM, H.C. NO, H.M. KIM, H.S. LIM 181
ISROMAC 2008 OFF-DESIGN PERFORMANCE OF GAS SEAL PADS ON HERRINGBONE GROOVED ROTOR D.P. FLEMING 39
ISROMAC 2008 NUMERICAL STUDY OF THE UNSTEADY CAVITATING FLOW R. CAMPOS-AMEZCUA, F. BAKIR, S. KHELLADI, R. REY 156
ISROMAC 2008 AN OPTIMIZATION METHOD FOR CENTRIFUGAL PUMP IMPELLERS R.W. WESTRA, N.P. KRUYT, K. VAN ANDEL, H.W.M. HOEIJMAKERS 147
ISROMAC 2008 A COMPUTATIONAL TOOL FOR THE ANALYSIS OF SECONDARY AIR FLOW NETWORK IN GAS G. CROCE, R. GAZZANO, L. RATTO, A. SATTA 258
ISROMAC 2008 FLOW INSTABILITIES IN FEATHER SEALS DUE TO UPSTREAM HARMONIC PRESSURE FLUCTUATIONS D. DENG, M.J. BRAUN, R.C. HENDRICKS 206
ISROMAC 2008 THEORETICAL ANALYSIS OF THERMODYNAMIC EFFECT OF CAVITATION IN CRYOGENIC INDUCER USING SINGULARITY METHOD S. WATANABE, A. FURUKAWA, Y. YOSHIDA 251
ISROMAC 2008 MEASUREMENTS IN AN UNSHROUDED PUMP USING STEREO-PARTICLEIMAGE- VELOCIMETRY F. FROLIG, S. CAGLAR, M. GABI 30
ISROMAC 2008 PROCEDURE FOR THE AXIAL MULTISTAGE TURBOMACHINERIES PERFORMANCE ANALYSIS G. CROCE, E. DEDICATO, R. GAZZANO, L. RATTO, A. SATTA 155
ISROMAC 2008 AERODYNAMIC MISTUNING EFFECTS ON BLADE ROW UNSTEADY AERODYNAMICS S. FLEETER, D. GOTTFRIED 7
ISROMAC 2008 CAVITATION INSTABILITY OF A TWO-BLADED TURBOPUMP INDUCER K.H. LEE, M. SEO, S.H.KANG 256
ISROMAC 2008 PIV MEASUREMENTS OF UNSTEADY FLOW IN A DIFFUSER PUMP AT DIFFERENT FLOW RATES F.K. BENRA, J. FENG, H.J. DOHMEN 24
ISROMAC 2008 CONTRIBUTION OF CLOCKING EFFECTS TO THE MULTISTAGE TURBINE PERFORMANCE IMPROVEMENT A. SMOLNY, J. KRYSINSKI, J.R. BLASZCZAK 195
ISROMAC 2008 THE EFFECT OF GUIDES ON CIRCULAR SAW VIBRATION CHARACTERISTICS S. G. HUTTON 174
ISROMAC 2008 NUMERICAL TURBULENT SIMULATION AND EXPERIMENTATION OF THE TWO-PHASE FLOW (LIQUIDE/GAS) THROUGH A CASCADE OF AN AXIAL PUMP A. VIDAL, O. AGUILLON, F. KENYERY, M. ASUAJE, A. TREMANTE 235
ISROMAC 2008 UNSTEADY PRESSURE MEASUREMENT IN WATER-FLOW EXPERIMENT OF TURBOPUMP T. MOTOMURA, H.KURE, N. YAMAMISHI, S. HORI 134
ISROMAC 2008 EFFECT OF PERIODIC UNSTEADY WAKE FLOW AND TURBULENCE INTENSITY ON HEAT TRANSFER OF HIGHLY LOADED TURBINE BLADE M.T. SCHOBEIRI 239
ISROMAC 2008 NUMERICAL SIMULATION OF THE FLOW IN A TWO STAGE TURBINE DRIVING A LIQUID OXYGEN PUMP J.S. RAO, M. SARAVANAKUMAR 111
ISROMAC 2008 INFLUENCE OF REAL GAS PHENOMENA IN A MULTISTAGE GAS TURBINE COMPRESSOR E. KUGELER, K. FAKHARI, R. MONIG 29
ISROMAC 2008 AREA RATIO EFFECTS ON CONICALLY EXPANDED HOLE FILM COOLING ADIABATIC EFFECTIVENESS G. BARIGOZZI, G. FRANCHINI, A. PERDICHIZZI 87
ISROMAC 2008 FEEDING HOLES AIR FLOW CHOKE EFFECT ON DYNAMIC COEFFICIENT OF AN AIR BEARING R.O. RUIZ, M.H. DI LISCIA, S.E. DIAZ 168
ISROMAC 2008 PERFORMANCE ANALYSIS OF CRYOGENIC MICROTURBINES R. SNYTSAR 255
ISROMAC 2008 EFFECTS OF AXIAL NONUNIFORM TIP CLEARANCES ON AERODYNAMIC PERFORMANCE OF A TRANSONIC AXIAL COMPRESSOR H. MA, B. LI 98
ISROMAC 2008 EXPERIMENTAL INVESTIGATION OF INNOVATIVE INTERNAL TRAILING EDGE COOLING CONFIGURATIONS WITH PENTAGONAL ARRANGEMENT AND ELLIPTIC PIN FIN L. TARCHI, B. FACCHINI, S. ZECCHI 89
ISROMAC 2008 ROTORDYNAMIC EFFECTS OF ADDING SPHERICAL ROLLER THRUST BEARING STIFFNESS COMPONENTS TO FIBER REFINER MODELS M. KARLBERG, J. SCHEDIN 113
ISROMAC 2008 COMPARING PREDICTED AND TESTED PERFORMANCE OF CRYOGENIC REACTION TURBINES UNDER LOCKEDROTOR CONDITION Ch. D. FINLEY 252
ISROMAC 2008 INFLUENCE OF THE NUMBER OF FLOW PASSAGES IN THE SIMULATION OF THE ROTATING STALL M. CHOI, J.H. BAEK 106
ISROMAC 2008 CFD SIMULATIONS AND CONJUGATE HEAT TRANSFER ANALYSIS OF A HIGH PRESSURE TURBINE VANE UTILIZING DIFFERENT COOLING CONFIGURATIONS G. M. LASKOWSKI, G.A. LEDEZMA, A.K. TOLPADI, M. C. OSTROWSKI 65
ISROMAC 2008 AN ADVANCED MICROTURBINE SYSTEM WITH WATER LUBRICATED BEARINGS S. NAKANO, T. KISHIBE, T. INOUE, H. SHIRAIWA 185
ISROMAC 2008 OBSERVATION AND ANALYSIS OF AFFINITY LAW DEVIATIONS THROUGH TESTED PERFORMANCE OF LIQUEFIED GAS REACTION TURBINES S. D. ALISON-YOUEL 257
ISROMAC 2008 UNSTEADY FLOWS IN CASCADES OF LAST STATOR ROWS OF GAS TURBINE AXIAL COMPRESSOR WORKING IN OFF-DESIGN CONDITIONS V. CYRUS, J. POLANSKY 116
ISROMAC 2008 AN EXPERIMENTAL AND NUMERICAL INVESTIGATION OF JET IMPINGEMENT ON RIBS IN AN AIRFOIL TRAILING-EDGE COOLING CHANNEL M.E. TASLIM, G.J. NICOLAS 238
ISROMAC 2008 ANALYSIS OF AXIAL VIBRATIONS FOR BEARINGS SEGMENT MOTORS ARISING FORM PARAMETER EXCITATION W. GRUBER, W. AMRHEIN, H. GRABNER 97
ISROMAC 2008 H-DARRIEUS WIND TURBINE WITH BLADE PITCH CONTROL I. PARASCHIVOIU, O. TRIFU 159
ISROMAC 2008 PROPERTIES OF SOME PRESSURE-RATIO LINE OF RADIAL INFLOW TURBINES AND APPLICATION TO OFFDESIGN CONSIDERATIONS N. BINDER, X. CARBONNEAU, P. CHASSAING 83
ISROMAC 2008 CFD HEAT TRANSFER PREDICTIONS FOR A GAS TURBINE COMBUSTOR IMPINGEMENT COOLING CONFIGURATION S. SPRING, B. WEIGAND, W. KREBS, M. HASE 22
ISROMAC 2008 VIBRATIONAL EFFECTS OF BEARING MISALIGNMENT DEFECT EXPRESSED IN THE FORM OF BEARING DISPLACEMENT MAPS J. RYBCZYNSKI 26
ISROMAC 2008 DEVELOPMENT OF A VANED TYPE NOVEL AIR TURBINE B.R. SINGH, O. SINGH 46
ISROMAC 2008 TURBOCHARGING - A SUCCESSFUL SYMBIOSIS OF TURBOMACHINERY AND RECIPROCATING ENGINES H. PUCHER, M. VOGT 84
ISROMAC 2008 POTENTIAL CARBON NEGATIVE COMMERCIAL AVIATION THROUGH LAND MANAGEMENT R.C. HENDRICKS 242
ISROMAC 2008 EFFECT OF HYDRODYNAMIC THRUST BEARINGS ON ROTORDYNAMICS J.V. MADISON 76
ISROMAC 2008 NUMERICAL INVESTIGATION ON THE PERFORMANCE OF A SAVONIUS WIND TURBINE M. TORRESI, S.M. CAMPOREALE, B. FORTUNATO 144
ISROMAC 2008 EXPERIMENTAL DYNAMIC ANALYSIS OF AN AUTOMOTIVE TURBOCHARGER IN A HOT TEST STAND G.G. VENSON, J.E.M. BARROS 104
ISROMAC 2008 GAS BEARING TEST RIG WITH THE SHAFT SUPPORTED ON MAGNETIC BEARINGS N.M. ENE, L.E. MORARU, F. DIMOFTE, A. AFJEH 50
ISROMAC 2008 SIMULTANEOUS VELOCITY AND CONCENTRATION MEASUREMENTS USING LASEROPTICAL MEASUREMENT METHODS IN COMPARISON WITH REYNOLDS AVERAGED NAVIERSTOKES MODELS T. LISCHER, G.D. DONNERT, F.C.C. GALEAZZO, P. HABISREUTHER, N. ZARZALIS, R. VALDES, W. KREBS 112
ISROMAC 2008 GAS TURBINE BLADE DESIGN USING MULTIOBJECTIVE OPTIMIZATION AND DUAL GEOMETRY REPRESENTATION T. MENGISTU, W. GHALY 5
ISROMAC 2008 NUMERICAL STUDY OF A BULB HYDRAULIC TURBINE C.C.B. SANTOS, J.G. COELHO, A.C.P. BRASIL JUNIOR 208
ISROMAC 2008 CASE STUDY OF RESONANCE PHENOMENA IN A VERTICAL HYDROPOWER UNI M. NASSELQVIST, R. GUSTAVSSON, J.O. AIDANPAA 55
ISROMAC 2008 AN INVESTIGATION OF WAKE INTERACTION EFFECTS ON UNSTEADY FLOWS OVER BLADING J.P. GOSTELOW, R.L. THOMAS, D.S. ADEBAYO 145
ISROMAC 2008 WEIGHT OPTIMIZATION OF TURBINE BLADES J.S. RAO, Ch. B. KISHORE, V. MAHADEVAPPA 20
ISROMAC 2008 NUMERICAL SIMULATION OF ACTIVE FLOW CONTROL IN HYDRO TURBINES R. WUNDERER, R. SCHILLING 120
ISROMAC 2008 VIBRATION ANALYSIS OF SERVICE WATER PUMP MOTORS - A CASE STUDY K. RAMAKRISHNA 70
ISROMAC 2008 PREDICTION OF FLAME DYNAMICS IN A MATRIX BURNER D. BOHN, N. OHLENDORF, J. WILLIE 63
ISROMAC 2008 FORM FACTOR AT SPEED FROM ROUTINE MODEL TESTS L. IANNONE 51
ISROMAC 2008 ON THE APPLICATION OF LEANING TECHNIQUE ON ANNULAR TURBINE CASCADES A. MORA, G. D'IPPOLITO, V. DOSSENA 31
ISROMAC 2008 FULL 3D STRATEGIES FOR ROTOR-STATOR CONTACT INTERACTION IN TURBOMACHINERY M. LEGRAND, Ch. PIERRE, P. CARTRAUD 133
ISROMAC 2008 PREPARATION OF BIOMASSGASIFICATION PRODUCT GASES FOR FUEL SYNTHESIS BY CATALYTIC CLEANING AND GAS FILTRATION F. BEHRENDT, M. GAGGL, Y. NEUBAUER, D. MANNEL, W. RESCHETILOWSKI 216
ISROMAC 2008 NEW PROSPECTS FOR SEABORNE ELECTRIC PROPULSIVE POWERS ON BASIS OF PODDED PROPULSORS APPLICATIONS J. KANAR 141
ISROMAC 2008 OPTIMISATION OF TURBINE BLADE SHROUD AND UNDERPLATFORM DAMPERS : PART 1 : EXPERIMENTAL S. PATSIAS, P. DOODY, R. ELLIOTT 92
ISROMAC 2008 TRANSIENT COUPLED VIBRATION RESPONSE OF A CRACKED ROTOR A.K. DARPE, T.H. PATEL 230
ISROMAC 2008 THERMAL BEHAVIOUR OF LARGE HYDROGENERATORS M. CHAABAN, J. LEDUC, C. HUDON, D.N. NGUYEN 154
ISROMAC 2008 OPTIMISATION OF TURBINE BLADE SHROUD AND UNDERPLATFORM DAMPERS : PART 2 : NUMERICAL PREDICTIONS R. ELLIOTT, S. PATSIAS, P. DOODY 164
ISROMAC 2008 A NUMERICAL ANALYSIS OF ROTORDYNAMIC FLUID FORCES ON AN ARTIFICIAL HEART PUMP IMPELLER IN WHIRLING MOTION T. SUZUKI, K. YONEZAWA, H. HORIGUCHI, T. TSUKIYA, Y. TAENAKA, Y. TSUJIMOTO 232
ISROMAC 2008 THE PREDICTION OF HOT STREAK MIGRATION IN A HIGH PRESSURE TURBINE J. ONG, R.J. MILLER, J.D. DENTON 73
ISROMAC 2008 LARGE EDDY SIMULATION OF NONISOTHERMAL TURBULENT ROTORSTATOR FLOWS S. PONCET, E. SERRE 9
ISROMAC 2008 TIME-FREQUENCY CHARACTERIZATION OF ROTATING INSTABILITIES IN A CENTRIFUGAL PUMP WITH A VANED DIFFUSER G. PAVESI, G. CAVAZZINI, G. ARDIZZON 135
ISROMAC 2008 FORCED RESPONSE OF AN ISOLATED THREEDIMENSIONAL BLADE UNDER A PULSATING FREESTREAM S.H. CHO, S.J. SONG 218
ISROMAC 2008 OPTIMISING AND MANUFACTURING A LASER-DRILLED COOLING HOLE GEOMETRY FOR EFFUSION-COOLED MULTILAYER PLATES P. POPRAWE, I. KELBASSA, K. WALTHER, M. WITTY, D. BOHN, R. KREWINKEL 91
ISROMAC 2008 SIMULATION AND VALIDATION OF A MARINE PROPELLER 5168 WITH AN ARBITRARY MACH NUMBER SCHEME C. SHENG, X. WANG, Q. ZHAO 213
ISROMAC 2008 EXPERIMENTAL CORE FLOW INSTABILITY IN WIDE VANELESS DIFFUSERS S. LJEVAR, A. DAZIN, P. DUPONT, G. CAIGNAERT, G. BOIS, H.C. DE LANGE, A.A. VAN STEENHOVEN 151
ISROMAC 2008 THE NONLINEAR ANALYSIS OF THE MULTIHARMONIC FORCED RESPONSE OF COUPLED TURBINE BLADING C. SIEWERT, M. KRACK, L. PANNING, J. WALLASCHEK 219
ISROMAC 2008 EVALUATION OF THE USE OF THE ADIABATIC WALL TEMPERATURE TO PREDICT HEAT FLUXES FOR FILM COOLED TURBINE AIRFOILS K.L. HARRISON, D.G. BOGARD 187
ISROMAC 2008 REYNOLDS-STRESS TURBULENCE MODELLING FOR TURBOMACHINERY CFD G.A. GEROLYMOS, I. VALLET 229
ISROMAC 2008 SUPPRESSION OF PERFORMANCE CURVE INSTABILITY OF AN AXIALFLOW PUMP BY USING A DOUBLE-INLET NOZZLE P. PEREZ FLORES, G. KOSYNA, D. WULFF 28
ISROMAC 2008 A REDUCTION TECHNIQUE FOR MISTUNED BLADED DISKS WITH SUPERPOSITION OF LARGE GEOMETRIC MISTUNING AND SMALL MODEL UNCERTAINTIES V. GANINE, M. LEGRAND, Ch. PIERRE, H. MICHALSKA 158
ISROMAC 2008 COMPUTATION OF UNSTEADY HEAT TRANSFER ON THE CASING OF A TURBINE BLADE A.A. AMERI, L. EL-GABRY 191
ISROMAC 2008 EXPERIMENTAL MEASUREMENT OF ROTORDYNAMIC FLUIDS FORCES ON AN OPEN-TYPE CENTRIFUGAL IMPELLER IN WHIRLING MOTION T. SUZUKI, R. PRUNIERES, H. HORIGUCHI,Y.TSUJIMOTO 131
ISROMAC 2008 FRICTION DAMPING ANALYSIS IN TURBINE BLADES USING A USERPROGRAMMED FUNCTION IN ANSYS R. PHADKE, E.J. BERGER 176
ISROMAC 2008 PERFORMANCE EVALUATION OF A SOLAR DRIVEN ORGANIC RANKINE CYCLE (ORC) WITH DIFFERENT WORKING FLUIDS S. BRUSCA, R. LANZAFAME, M.L. LO TROVATO, A. TIRRO 182
ISROMAC 2008 ON SIMILARITIES BETWEEN FLOW SYSTEMS OPERATING AT EXCESSIVE GAS LOAD AND AT CAVITATION CONDITIONS : HYDROFOIL TESTS AND CFD ASSESSMENT M. KJELDSEN, R.E.A. ARNDT 115
ISROMAC 2008 EXPERIMENTAL CHARACTERISATION AND MODELLING OF TURBOCHARGER HEAT TRANSFERS UNDER STEADY AND TRANSIENT CONDITIONS M. CORMERAIS, P. CHESSE, J.F. HETET, A. YAMMINE 6
ISROMAC 2008 EXPERIMENTAL ANALYSIS OF ROTORRETAINER- BEARING INTERACTION M. HELFERT, B. AESCHLIMANN, R. NORDMANN 90
ISROMAC 2008 THE IMPORTANCE OF COMPONENT MAPS FOR GAS TURBINE PERFORMANCE SIMULATIONS J. KURZKE 186
ISROMAC 2008 CAVITATION IN SINGLE VANE SEWAGE PUMPS P.U. THAMSEN, T. BUBELACH, T. PENSLER, P. SPRINGER 196
ISROMAC 2008 PRELIMINARY DESIGN OF AN ULTRA-MICRO GAS TURBINE FOR PORTABLE POWER GENERATION R. CAPATA, E. SCIUBBA 86
ISROMAC 2008 NON LINEAR DYNAMIC ANALYSIS OF FOIL BEARINGS S. LE LEZ, M. ARGHIR, J. FRENE 82
ISROMAC 2008 APPLICATION O GAMMA CODE COUPLED WITH TURBOMACHINERY MODELS FOR HIGH TEMPERATURE GASCOOLED REACTORS C.H. OH, E.S. KIM, S. SHERMANN, J.H. KIM, H.C. NO 224
ISROMAC 2008 TRANSITION OF DIFFERENT UNSTEADY CAVITATING FLOWS IN 2D CASCADE WITH FLAT BLADES T. OHTA, T. KAJISHIMA 197
ISROMAC 2008 NUMERICAL AND EMPERICAL PREDICTION OF THE MIXED FLOW TURBINE PERFORMANCE M. ABIDAT, M. HAMEL, S.A. LITIM 184
ISROMAC 2008 PARAMETER STUDY OF ROTOR RUBBING CONTROL WITH AN ACTIVE AUXILIARY BEARING L. GINZINGER, H. ULBRICH 81
ISROMAC 2008 A METHOD TO INTRODUCE SMALL AIR BUBBLES INTO THE WATER N. CHIBA 11
ISROMAC 2008 OPTIMIZATION OF THE WEB GEOMETRY OF A 180- DEGREE BEND USING AN EXPERIMENTALLY DETERMINED ICE LAYER AS STARTING CONTOUR : PART 1 : EXPERIMENTAL RESULTS S. ZEHNER, H. STEINBRUCK, B. WEIGAND, S.O. NEUMANN, J. GIER 49
ISROMAC 2008 POSSIBILITIES OF SIMULTANEOUS IN-CYLINDER REDUCTION OF SOOT AND NOx EMISSIONS FOR DIESEL ENGINES WITH DIRECT INJECTION U. WAGNER, U.SPICHER, P. ECKERT, S. MERKEL, A. VELJI A MODAL BASED 220
ISROMAC 2008 SUBSTRUCTURE METHOD APPLIED TO NONLINEAR ROTORDYNAMIC SYSTEMS H. J. HOLL 210
ISROMAC 2008 OPTIMIZATION OF THE WEB GEOMETRY OF A 180 DEGREE BEND USING AN EXPERIMENTALLY DETERMINED ICE LAYER AS STARTING CONTOUR : PART 2 : NUMERICAL SIMULATION AND OPTIMIZATION H. STEINBRUCK, S. ZEHNER, B. WEIGAND, S.O. NEUMANN, J. GIER 53
ISROMAC 2008 HALOPHYTES ENERGY FEEDSTOCKS : BACK TO OUR BOOTS R.C. HENDRICKS, D.M. BUSHNELL 241
ISROMAC 2008 VIBRATION SIMULATION OF A COILING PROCESS WITH CONTROL H.J. HOLL 211
ISROMAC 2008 TOWARDS THE CONTROL OF CAVITATING FLOWS R. E.A. ARNDT, M. WOSNIK 17
ISROMAC 2008 INFLUENCE OF INLET BOUNDARY CONDITIONS IN THE PREDICTION OF ROTOR DYNAMIC FORCES AND MOMENTS FOR A HYDRAULIC TURBINE USING CFD M. KARLSSON, H. NILSSON, J.O. AIDANPAA 78
ISROMAC 2008 NUMERICAL INVESTIGATION OF THE ADIABATIC FILMCOOLING EFFECTIVENESS AROUND AN HP-TURBINE AIRFOIL : DECOMPOSED COMPUTATION OF INTERNALEXTERNAL FLOWS D. CHARBONNIER, M. JONSSON, P. OTT 52
ISROMAC 2008 MINIMIZATION OF FORCED VIBRATIONS OF A MAGNETICALLY LEVITATED SHAFT DUE TO MAGNETIZATION TOLERANCES G. JUNGMAYR, W. AMRHEIN, H. GRABNER 95
ISROMAC 2008 A REDUCED ORDER MODEL FOR PRELIMINARY DESIGN AND PERFORMANCE PREDICTION OF TAPERED INDUCERS L. D'AGOSTINO, L. TORRE, A. PASINI, A. CERVONE 259
ISROMAC 2008 DYNAMIC BEHAVIOR OF VERTICAL AXIS WATER TURBINES : TWO DAYS OF HANDLING THE F/S COUPLING E. CHATELET, N. DRIOT, B. AL SAYED, G. JACQUET, 118
ISROMAC 2008 EXPERIMENTAL AND NUMERICAL INVESTIGATION OF PRESSURE LOSS AND HEAT TRANSFER IN A 180 DEG BEND OF A RIBBED MULTI-PASS COOLING CHANNEL WITH ENGINE-NEAR CROSS SECTION M. SCHULER, S.O. NEUMANN, B. WEIGAND 96
ISROMAC 2008 TRANSIENT DYNAMICS OF CENTRIFUGAL PENDULUM VIBRATION ABSORBERS S.W. SHAW, M.B. ORLOWSKI, A.G. HADDOW, B. GEIST 119
ISROMAC 2008 MEASUREMENT OF CAVITATION INDUCED STRAIN ON A3 BLADED INDUCER S.R. SARGENT, K.P. SORENSEN, R.D. McGLYNN 171
ISROMAC 2008 NUMERICAL INVESTIGATIONS OF FLUID STRUCTURE COUPLING : OSCILLATING HYDROFOIL C. MUNCH, O. BRAUN, J.L. KUENY, F. AVELLAN 245
ISROMAC 2008 RELATIVE RANKING OF FATIGUE LIVES OF ROTATING ALUMINIUM SHAFTS USING L10 WEIBULL-JOHSON CONFIDENCE NUMBERS B.L. VLCEK, R.C. HENDRICKS, E.V. ZARETSKY 122
ISROMAC 2008 CAVITATION INDUCED VIBRATIONS IN A 2-BLADED ROCKET ENGINE INDUCER M. SUBBARAMAN 260
ISROMAC 2008 PREDICTING THE ONSET OF CAVITATION IN AUTOMOTIVE TORQUE CONVERTERS : PART 1 : DESIGNS WITH GEOMETRIC SIMILITUDE D.L. ROBINETTE, J.M. SCHWEITZER, D.G. MADDOCK, C.L. ANDERSON, J.R. BLOUGH, M.A. JOHSON 35
ISROMAC 2008 A.C. PLASMA ANEMOMETER FOR AXIAL COMPRESSOR STALL WARNING E.H. MATLIS, T.C. CORKE, J. CAMERON, S.C. MORRIS 170
ISROMAC 2008 PREDICTING THE ONSET OF CAVITATION IN AUTOMOTIVE TORQUE CONVERTERS : PART II : A GENERALIZED MODEL D.L. ROBINETTE, J.M. SCHWEITZER, D.G. MADDOCK, C.L. ANDERSON, J.R. BLOUGH, M.A. JOHNSON 36
ISROMAC 2008 THE DESIGN AND NUMERICAL SIMULATION OF TWODIMENSIONAL FLOW PASSAGE OF ROTATING-RAM COMPRESSION ROTOR H.J.ANG, Z.J.JUN, Y.H.MING 175
ISROMAC 2008 IMPROVEMENT OF PERFORMANCE ESTIMATION MODEL USING INTERNAL FLOW ANALYSIS IN AN INDUSTRIAL TORQUE CONVERTER B. KIM, B.G. LEE, S. HA, S.W. CHA 68
ISROMAC 2008 IMPACT OF A SKEWED INLET BOUNDARY LAYER AND A FILLET ON THE SECONDARY FLOW IN A COMPRESSOR CASCADE M. HOEGER 183
ISROMAC 2008 SELF-INDUCED FLOW UNSTEADINESS AND NONSYNCHROROUS VIBRATIONS IN AXIAL COMPRESSORS C. HAH 32
ISROMAC 2010 Experimental and Numerical Investigation of Tip Clearance Flows in Pumps and Compressors Dr. Chunill Hah (NASA Glenn Research Center, USA) ISROMAC13-KS01
ISROMAC 2010 Experimental Study of Cavitating Flow in Flat Plate Cascades with/without Tip Clearance Satoshi Watanabe(Kyushu University, JAPAN), Takanari Suefuji, Atsumu Ikeda, Akinori Furukawa ISROMAC13-TS01
ISROMAC 2010 A Multi-Phase CFD Framework for Predicting Performance of Marine Propulsors Sung-Eun Kim(Naval Surface Warfare Center, USA), Seth Schroeder, Hrvoje Jasak ISROMAC13-TS02
ISROMAC 2010 Simulation of multistage Radial Pump for Two-Phase Flow Water-Air Carlos Moreno(Central University of Venezuela, VENEZUELA), Andres Tremante, Miguel Asuaje, Frank. Kenyery, Jesus De Andrade ISROMAC13-TS03
ISROMAC 2010 Experimental Characterization and Modelling of a Cavitating Centrifugal Pump Operating in Fast Start-Up Conditions S. Duplaa(IRENav, FRANCE),O. Coutier-Delgosha,A. Dazin,G. Bois,G. Caignaert ISROMAC13-TS04
ISROMAC 2010 Analysis of Acoustic Cavitation Surge in a Rocket Engine Hideaki NANRI(JAXA, JAPAN), Hiroki KANNAN, Naoki TANI, Yoshiki YOSHIDA ISROMAC13-TS05
ISROMAC 2010 Influence of Thermodynamic Effect on Blade Load in a Cavitating Inducer Kengo KIKUTA(JAXA, JAPAN), Noriyuki SHIMIYA, Tomoyuki HASHIMOTO, Mitsuru SHIMAGAKI, Hideaki NANRI, Yoshiki YOSHIDA ISROMAC13-TS06
ISROMAC 2010 Flow Instabilities on a Three Bladed Axial Inducer at Variable Tip Clearance Lucio Torre(Alta S.p.A., ITALY), Giovanni Pace, Piero Miloro, Angelo Pasini, Angelo Cervone, Luca d'Agostino ISROMAC13-TS07
ISROMAC 2010 Sheet/Cloud Cavitation Revisited Roger E. A. ARNDT(University of Minnesota, USA) ISROMAC13-TS08
ISROMAC 2010 Investigation of Velocity in Cavitating Flow by Ultra Fast X-Ray Imaging O. Coutier-Delgosha(Arts et Metiers ParisTech, FRANCE), A. Vabre, M. Hocevar, A. Dazin, M. Gmar, K. Fezzaa, W-K. Lee ISROMAC13-TS09
ISROMAC 2010 Measurement of the speed of sound in cavitating Flows Hiva Shamsborhan(Arts et Metiers ParisTech, FRANCE), Olivier Coutier-Delgosha, Guy Caignaert, Fadi Abdel Nour ISROMAC13-TS10
ISROMAC 2010 Automated Optimization of a Double S-Shaped Inlet for Minimum Loss and Reduced Sight onto the Engine Face Ulrich Siller(German Aerospace Center, GERMANY), Christian Voss ISROMAC13-TS32
ISROMAC 2010 Swirl Effect on the Flow Field in a Bent Duct U.Roh(Seoul National University, KOREA), J.H.Im, S.J.Song ISROMAC13-TS33
ISROMAC 2010 Hysteresis Phenomenon of Shock Wave in a Supersonic Nozzle Toshiaki SETOGUCHI(Saga University, JAPAN), Shigeru MATSUO, Miah Md. Ashraful ALAM, Norimasa SHIOMI, Heuy Dong KIM ISROMAC13-TS34
ISROMAC 2010 Kinematic Analysis and Digital Visualization of Secondary Flow in Curved Square Passage Qing-Long Liu(University of Shanghai for Science and Technology, CHINA), Bin Dai, Ren Dai, Kang-Min Chen ISROMAC13-TS35
ISROMAC 2010 Validation of Operational Gas Turbine Data Using a Model Based Approach M. Zwingenberg(University of Duisburg-Essen, GERMANY), F.-K. Benra, K. Werner ISROMAC13-TS36
ISROMAC 2010 Remote Sensing Technique for Aero Engine Emission Certification and Monitoring. The AEROTEST-Project Ralf Kurtenbach(University of Wuppertal, GERMANY), Klaus Brockmann, Herwart Hönen, Klaus Schäfer, Peter Wiesen ISROMAC13-TS37
ISROMAC 2010 Effect of an Oil Separator on the Behavior of Refrigeration Oil in Air-Conditioning Systems Hyun-Seok Shin(Sungkyunkwan University, KOREA), Deock-Kyu Lee, Youn-Jea Kim ISROMAC13-TS38
ISROMAC 2010 Developement of A LDA Endoscope for Determination of The Velocity within Shrouded Rotor Blades Dieter Bohn(RWTH Aachen University, GERMANY), Stephan Schwab, Michael Sell ISROMAC13-TS39
ISROMAC 2010 Grooved Blades in Unshrouded Impellers Experimental and Numerical Investigations Friedrich Fröhlig(Karlsruhe Institute of Technology, GERMANY), Maximilian Titzschkau, Saban Caglar, Martin Gabi ISROMAC13-TS40
ISROMAC 2010 Study on The Flow Behaviour of Supersonic Microjets Miah Md. Ashraful ALAM(Saga University, JAPAN), Shigeru MATSUO, Toshiaki SETOGUCHI ISROMAC13-TS41
ISROMAC 2010 Encounters with Vortices in a Turbine Nozzle Passage J.P.Gostelow(National Research Council of Canada, CANADA), A.Mahallati, W.E.Carscallen, A.Rona ISROMAC13-TS42
ISROMAC 2010 Experimental investigation on Heat Transfer and Pressure Drop in A Ribbed Roughened Leading Edge Cooling Channel N.Domaschke(Universität Stuttgart, GERMANY), J.v.Wolfersdorf, K.Semmler ISROMAC13-TS63
ISROMAC 2010 Numerical Predictions of Fluid Flow and Heat Transfer in a Rotating Engine-Similar Two-Pass Internal Cooling Channel With Smooth and Ribbed Walls M.Schüler(Universität Stuttgart, GERMANY), H.-M.Dreher, M.Elfert, S.O.Neumann, B.Weigand ISROMAC13-TS64
ISROMAC 2010 An Integrated Approach to the Calculation of Grid-Sheets for Steam Turbine Cooling D.Bohn(RWTH Aachen University, GERMANY), R.Krewinkel, Chr.Rakut, G.Laschet, S.Rex ISROMAC13-TS65
ISROMAC 2010 On the Assumption of Transient 1D Heat Conduction in Walls with Convective Heat Transfer – Analytical Methods and Limitations Bernhard Kobiela(Universität Stuttgart, GERMANY), Diane Lauffer, Bernhard Weigand ISROMAC13-TS66
ISROMAC 2010 Conjugate Calculation of Steam-Cooled Intermediate Pressure Steam Turbines with A Live Steam Temperature of 720°C D.Bohn(RWTH Aachen University, GERMANY), D.Wendland ISROMAC13-TS67
ISROMAC 2010 Numerical Investigation of the Cooling Film Development on a Film- and Effusion-Cooled Blade D.Bohn(RWTH Aachen University, GERMANY), R.Krewinkel, D.Wendland ISROMAC13-TS68
ISROMAC 2010 Influence of Coolant Density on Turbine Blade Suction Side Film-Cooling Using Pressure Sensitive Paint Technique Diganta P. Narzary(Texas A&M University, USA), Kuo-Chun Liu, Je-Chin Han ISROMAC13-TS69
ISROMAC 2010 Heat Transfer Characteristics of Inclined Pin-Fin Channels with a Wavy Endwall Hideki MORIAI(Mitsubishi Heavy Industries, Ltd., JAPAN), Yoshiaki MIYAKE, Kenichiro TAKEISHI, Yutaka ODA, Yusuke MOTODA ISROMAC13-TS70
ISROMAC 2010 Analytical Modeling of the Potential-Interaction Noise of a Rotor Due to a Downstream Rod Michel Roger(Ecole Centrale de Lyon, FRANCE) ISROMAC13-TS71
ISROMAC 2010 Grasp of Noise Sources Generated from Propeller Fan by Using Near-field Acoustic Holography Seiji Nakashima(Mitsubishi Electric Corporation, JAPAN), Koji Kise ISROMAC13-TS72
ISROMAC 2010 Transonic Compressor Testing - The SANGER Fan Stage Professor Garth Hobson (Naval Postgraduate School, USA) ISROMAC13-KS02
ISROMAC 2010 Optimal Design for a Floodgate-type Small Hydro Turbine Nam-Chul Paik(School of Mechanical Engineering, Sungkyunkwan University, KOREA), Jae-Young Lee, Youn-Jea Kim ISROMAC13-TS14
ISROMAC 2010 Pressure Measurements in the Spiral Casing of a Kaplan Turbine Model P.P. Jonsson(Luleå University of Technology, SWEDEN), M.J. Cervantes ISROMAC13-TS12
ISROMAC 2010 LDA Measurements in a Kaplan Spiral Casing Model B.G. Mulu(Luleå University of Technology, SWEDEN), M.J. Cervantes ISROMAC13-TS13
ISROMAC 2010 Dynamic Behaviour of Reversible Pump-Turbines in Turbine Mode of Operation Torbjørn K. Nielsen(Norwegian University of Science and Technology, NORWAY), Grunde Olimstad ISROMAC13-TS11
ISROMAC 2010 Data Analysis From Onboard Francis Model Runner Pressure Measurements Einar Kobro(Norwegian University of Science and Technology, NORWAY), Torbjørn K. Nielsen, Ole G. Dahlhaug ISROMAC13-TS15
ISROMAC 2010 A Three-Dimensional Inverse Method based on Load Control for Radial Inflow Turbine Impeller Ren Dai(University of Shanghai for Science and Technology, CHINA), Liu Chen, Kangmin Chen ISROMAC13-TS16
ISROMAC 2010 Effects of Flow Incidence on the Aerodynamic Performance of a Two Dimensional Steam Turbine Stator Blade Cascade Hicham A Chibli(Texas A&M University, USA), M.T. Schobeiri ISROMAC13-TS17
ISROMAC 2010 Numerical Investigation of the Internal Flow in a Banki Turbine. Comparison with Experimental Results Jesús De Andrade(Simón Bolívar University, VENEZUELA), Christian Curiel, Frank Kenyery, Orlando Aguillón, Auristela Vásquez, Miguel Asuaje ISROMAC13-TS18
ISROMAC 2010 Prediction of Wind Turbine Characteristics by Practical CFD Simulation Using a Few Grid Points Masami Suzuki(School of Engineering, University of Tokyo, JAPAN) ISROMAC13-TS19
ISROMAC 2010 Advanced Design of Vertical Axis Wind Turbine in Urban Environment Ion Paraschivoiu(École Polytechnique de Montréal, CANADA), Norbert Voutthi Dy, Marius Paraschivoiu, Vimal Kumar ISROMAC13-TS20
ISROMAC 2010 Semi- analytical prediction of stator vane pressure distribution due to rotor wake turbulence Hélène Posson(Université de Sherbrooke, CANADA), Stephane Moreau ISROMAC13-TS43
ISROMAC 2010 Comparison of analytical and numerical predictions of stator vane pressure distribution produced by mean rotor wake impingement Hélène Posson(Université de Sherbrooke, CANADA), Frédéric Sicot, Stéphane Moreau, Nicolas Gourdain ISROMAC13-TS44
ISROMAC 2010 On Numerical and Analytical Modelling of Flow Behaviour in a Rotor-Stator System without Superposed Flow: Experimental Comparison Fadi ABDEL NOUR(PRES Université Nord de France, FRANCE), Roger DEBUCHY, Gérard BOIS, Hassan NAJI ISROMAC13-TS46
ISROMAC 2010 Rotating Instabilities in a Radial Vaneless Diffuser A.Dazin(Arts et Métiers ParisTech, FRANCE), G.Cavazzini, G.Pavesi, P.Dupont, G.Ardizzon, G.Caignaert, G.Bois ISROMAC13-TS47
ISROMAC 2010 Artificial Neural Network Assisted Optimization of a Centrifugal Compressor using Evolutionary Algorithms René Meier(Helmut Schmidt University, GERMANY), Franz Joos ISROMAC13-TS48
ISROMAC 2010 Tip Clearance Effect on The Flow Field within a High-Pressure Centrifugal Compressor N.Buffaz(Ecole Centrale de Lyon, FRANCE), I.Trébinjac ISROMAC13-TS49
ISROMAC 2010 Flow Behavior with Flow Rate Variation in Vaneless Diffuser of Centrifugal Compressor Kyung Jun Kang(Korea Institute of Science and Technology, KOREA), You Hwan Shin, Kwang Ho Kim, Yoon Pyo Lee ISROMAC13-TS50
ISROMAC 2010 Performance Enhancement of a Centrifugal Compressor Impeller through Optimization Techniques Jin-Hyuk Kim(Inha University, KOREA), Jae-Ho Choi, Kwang-Yong Kim ISROMAC13-TS51
ISROMAC 2010 Using Operational Modal Analysis to Determine Rotordynamic Modes Martin Karlsson(Lloyd's Register ODS, SWEDEN), Henrik Samuelsson, Magnus Karlberg ISROMAC13-TS73
ISROMAC 2010 Dynamics of Rotor Systems with Clearance and Weak Pedestals in Full Contact Magnus Karlberg(Luleå University of Technology, SWEDEN), Martin Karlsson, Lennart Karlsson, Mats Näsström ISROMAC13-TS74
ISROMAC 2010 Effects of Shaft Flexibility and Gyroscopic Coupling on Instability Threshold Speeds of Rotor-Bearing Systems Jean-Claude Luneno(Luleå University of Technology, SWEDEN), Jan-Olov Aidanpää, Rolf Gustavsson ISROMAC13-TS75
ISROMAC 2010 Model-based Identification of Unbalance and Angular Misalignment in a Rotor System Benjamin Heckmann(TU Munchen, GERMANY), Lucas Ginzinger, Heinz Ulbrich ISROMAC13-TS76
ISROMAC 2010 Linear and Nonlinear Frequency Characteristics of Rotating Discs Stanley G. Hutton(University of British Columbia, CANADA),Ramin M.H. Khorosany, John White ISROMAC13-TS77
ISROMAC 2010 Resonance and stability of stationary solutions in linear systems of rotary machinery with periodic parameter variations and external excitation Hartmut Hetzler(Karlsruhe Institute of Technology, GERMANY) ISROMAC13-TS78
ISROMAC 2010 Transient Steam Flow Simulation in a Low Pressure Turbine Portion for a Blade Fatigue Analysis Henrique Carlos Monteiro(Engineering Simulation and Scientific Software Ltda., BRAZIL), Leonardo Paes Rangel, António Fábio Carvalho da Silva, José Carlos Pereira, Edison da Rosa, Helder Bindewald, Luiz Augusto de Mello Torres ISROMAC13-TS79
ISROMAC 2010 Finite Volume Method for the Fluid Structure Interaction in Real Life Applications Benedikt Flurl(Technische Universität München, GERMANY), Mathias Bogner, Rudolf Schilling ISROMAC13-TS80
ISROMAC 2010 Axisymmetric Casing Optimization for Transonic Compressor Rotors Georg Kröger(German Aerospace Center, GERMANY), Christian Voß, Eberhard Nicke ISROMAC13-TS21
ISROMAC 2010 Recirculation of Bleed Air for Active Compressor Stabilization Stefan Bindl(University of the German Federal Armed Forces, GERMANY), Bastian Muth, Reinhard Niehuis ISROMAC13-TS22
ISROMAC 2010 Aerodynamic Study of Circumferential Grooves in a Transonic Axial Compressor Chunill HAH(NASA Glenn Research Center, USA), Martin MUELLER, Heinz-Peter SCHIFFER ISROMAC13-TS23
ISROMAC 2010 Numerical Analysis of the Effects of Rotor Tip Injection on Axial Compressor Aerodynamics and Performance Jan-Christoph Haag(RWTH Aachen University, GERMANY), Peter Jeschke ISROMAC13-TS24
ISROMAC 2010 CFD Study on an Air Injection System for Active Compressor Stabilisation Bastian Muth(University of the German Federal Armed Forces, GERMANY), Stefan Bindl, Reinhard Niehuis ISROMAC13-TS25
ISROMAC 2010 Experimental study of the compressor surge Michel TOUSSAINT(CNAM Paris France, FRANCE), Chiheb ELKAMEL, Pierre AUMOITE ISROMAC13-TS26
ISROMAC 2010 Effect of Inlet Geometry on Fan Characteristics in a Small Axial Fan Norimasa Shiomi(Saga University, JAPAN), Yoichi Kinoue, Toshiaki Setoguchi ISROMAC13-TS27
ISROMAC 2010 Investigation of the flow generated by an axial 3-blade fan Franck Pérot(Exa Corporation, USA), Min-Suk Kim, Stéphane Moreau, Douglas Neal ISROMAC13-TS28
ISROMAC 2010 Investigation of Performance Improvements of a Cross-Flow Fan Cordero,S.M.(Naval Postgraduate School, USA), Hobson,G.V., Gannon,A.J. ISROMAC13-TS29
ISROMAC 2010 Performance Investigations of Sirocco Fans by Means of Computational Fluid Dynamics Adam Stuchlik(University of Applied Sciences Berlin, GERMANY), Stefan Frank, Paul-Uwe Thamsen ISROMAC13-TS30
ISROMAC 2010 Design Optimization of a Volute Casing in a Centrifugal Fan Installed in a Refuse Collecting System Choon-Man Jang(Korea Institute of Construction Technology, KOREA), Sang-Ho Yang ISROMAC13-TS31
ISROMAC 2010 Numerical and Experimental Investigation of the Flow in the Side Cavities of a Centrifugal Pump Björn-Christian Will(Institute of Energy and Environmental Engineering, GERMANY), Friedrich-Karl Benra, Hans-Josef Dohmen ISROMAC13-TS52
ISROMAC 2010 Flow Distribution in Shroud Clearance of Single Vane Pumps P.U.Thamsen(Technical University Berlin, GERMANY), T.Bubelach, T.Pensler ISROMAC13-TS53
ISROMAC 2010 Time–Frequency Characterization of a Rotating Multi-Lobes Pressure Fluctuation in a Centrifugal Vaned Pump G.Pavesi(University of PADOVA, ITALY), G.Cavazzini, G.Ardizzon ISROMAC13-TS54
ISROMAC 2010 Miniaturized high speed motor coolant pumps Silvio Bischoff(GPM GmbH, GERMANY), Günter Kosyna ISROMAC13-TS55
ISROMAC 2010 Scaling Friction and Inertia Losses for the Performance Prediction of Turbomachines Peter F. Pelz(Technische Universität Darmstadt, GERMANY), Michael Hess ISROMAC13-TS56
ISROMAC 2010 CFD Modeling of Discrete Phase Mixing in a Pump Flow Mikhail P. Strongin(ITT, R&CW, USA) ISROMAC13-TS57
ISROMAC 2010 Off-Design Performance of Finger Seal Lift Pads David P. Fleming(USA) ISROMAC13-TS58
ISROMAC 2010 Magnetic Bearings for Smart Aero Engines Becker, Karl-Helmut(MTU Aero Engines, GERMANY) ISROMAC13-TS59
ISROMAC 2010 A Component Level Test Rig for Dynamic Characterization of Oil Lubricated Bearings Using Different Input Excitations Adolfo Delgado(GE Global Research Center, USA), Bugra Ertas, Michael Drexel, Giuseppe Vannini, Lorenzo Naldi ISROMAC13-TS60
ISROMAC 2010 Bifurcations of rotors supported by plain hydrodynamic bearings Aydin Boyaci(Karlsruhe Institute of Technology, GERMANY), Wolfgang Seemann, Carsten Proppe ISROMAC13-TS61
ISROMAC 2010 Numerical Approach to Study the Influence of Honeycomb Facings on the Temperature Distribution of Labyrinth Seals Tina Weinberger(Karlsruhe Institute of Technology, GERMANY), Klaus Dullenkopf, Hans-Jörg Bauer ISROMAC13-TS62
ISROMAC 2010 Structure and Acoustic Analysis of a Gas Turbine Matrix Burner D.Bohn(RWTH Aachen University, GERMANY), J.F.Willie ISROMAC13-TS81
ISROMAC 2010 Particulate Emissions Hazards Associated With Fueling Heat Engines R.C.Hendricks(NASA Glenn Research Center, USA), D.M.Bushnell ISROMAC13-TS82
ISROMAC 2010 Engine Downsizing by Gasoline Direct Injection and Turbocharging Ulrich Spicher(Karlsruhe Institute of Technology, GERMANY), Fatih Sarikoc ISROMAC13-TS83
ISROMAC 2010 Computational Analysis of Dynamic SPK(S8)-JP-8 Fueled Combustor-Sector Performance R.Ryder(Flow Parametrics, USA), R.C.Hendricks, M.L.Huber, D.T.Shouse ISROMAC13-TS84
ISROMAC 2010 A Very Large Eddy Simulation of the Non-reacting Flow in a Single-Element Lean Direct Injection Combustor Using PRNS with a Nonlinear Subscale Model Nan-Suey Liu(NASA Glenn Research Center, USA), Tsan-Hsing Shih ISROMAC13-TS85
ISROMAC 2010 Effects of Nozzle Inner Flow on Liquid Sheet Dynamics and Primary Atomization Chihiro Inoue(University of Tokyo, JAPAN), Toshinori Watanabe, Takehiro Himeno, Seiji Uzawa ISROMAC13-TS86
ISROMAC 2010 Aviation Fueling: A Cleaner, Greener Approach R.C.Hendricks(NASA Glenn Research Center, USA), D.M.Bushnell, D.T.Shouse ISROMAC13-TS87
ISROMAC 2010 Alternate-Fueled Combustor-Sector Performance: Part A: Combustor Performance Part B: Combustor Emissions D.T.Shouse(Wright-Patterson Air Force Base, USA), C.Neuroth, R.C.Hendricks, A.Lynch, C.Frayne, J.S.Stutrud, E.Corporan, Capt.T.Hankins ISROMAC13-TS88
ISROMAC 2010 Control System Modifications for a Hydrogen Fuelled Gas-Turbine S.Boerner(Aachen University of Applied Sciences, GERMANY), H.H.-W.Funke, P.Hendrick, E.Recker ISROMAC13-TS89
ISROMAC 2010 Atmospheric and Soil Carbon and Halophytes R.C.Hendricks(NASA Glenn Research Center, USA), D.M.Bushnell ISROMAC13-TS90
ISROMAC 2012 DESIGN OPTIMIZATION AND SENSITIVITY ANALYSIS METHODS FOR STRUCTURAL COMPONENTS IN UNSTEADY AIR FLOW Baier, H.; Petersson, Ö.
ISROMAC 2012 INCLUDING PUMP-CIRCUIT INTERACTIONS IN CFD SIMULATIONS BY MEANS OF USER-DEFINED FUNCTIONS Barrio, R.; Blanco, E.; Keller, J.; Fernández, J.; Parrondo, J.
ISROMAC 2012 SPECTRAL ANALYSIS OF UNSTEADY FLOW SIMULATION IN A SMALL VAWT Bayeul-lainé, A.-C.; Simonet, S.; Bois, G.
ISROMAC 2012 AN APPROACH USING DOE IN STRUCTURE MECHANICS A STEP TOWARDS ROBUST DESIGN Becker, K.-H.
ISROMAC 2012 A NUMERICAL AND EXPERIMENTAL INVESTIGATION OF AN IMPINGEMENT COOLING SYSTEM FOR AN ACTIVE CLEARANCE CONTROL SYSTEM OF A LOW PRESSURE TURBINE Ben Ahmed, F.; Poser, R.; Schumann, Y.; von Wolfersdorf, J.; Weigand, B.; Meier, K.
ISROMAC 2012 NUMERICAL INVESTIGATION OF 3D SECONDARY FLOW STRUCTURES ON A 2D SLOTTED CONTROLLED COMPRESSOR CASCADE AT HIGH LOADED CONDITIONS Bois, G.; Ramzi, M.; Abderrahmène, G.
ISROMAC 2012 STABILITY AND BIFURCATION BEHAVIOR OF TURBOCHARGER ROTORS - COMPARISON OF FULL-FLOATING AND SEMI-FLOATING RING BEARINGS Boyaci, A.; Seemann, W.; Schweizer, B.
ISROMAC 2012 BACK DEDUCTION OF THE RADIAL TURBINE MAP FROM A LOADING TO FLOW COEFFICIENT DIAGRAM Carbonneau, X.; Binder, N.
ISROMAC 2012 INFLUENCE OF THE RETURN CHANNEL GEOMETRY ON THE PERFOMANCE STABILITY OF A CENTRIFUGAL PUMP Cavazzini, G.; Pavesi, G.; Ardizzon, G.
ISROMAC 2012 EFFECTS OF THE LEADING EDGE SHAPE ON THE PERFORMANCE OF AN AXIAL THREE BLADED INDUCER Cervone, A.; Pace, G.; Torre, L.; Pasini, A.; Bartolini, S.; Agnesi, L.; d'Agostino, L.
ISROMAC 2012 NODAL DISCONTINUOUS GALERKIN METHOD TO CAA Chen, E.; Yang, A.; Zhao, G.
ISROMAC 2012 FLOW CHARACTERISTICS IN A STRAIGHT CASCADE OF VARIABLE AREA STATOR VANES Chen, L.; Dai, R.; Zhang, J.
ISROMAC 2012 UNCERTAINTY QUANTIFICATION OF LOW-SPEED AXIAL FAN SELF-NOISE Christophe, J.; Sanjose, M.; Moreau, S.
ISROMAC 2012 VELOCITY MEASUREMENTS IN CAVITATING FLOWS BY FAST X-RAY IMAGING Coutier-Delgosha, O.; Hocevar, M.; Khlifa, I.; Fuzier, S.; Vabre, A.; Fezzaa, K.; Lee, W.-K.
ISROMAC 2012 INFLUENCE OF DISCRETISATION ONTO THE PREDICTION OF PROPELLER NOISE GENERATION: THEORY AND APPLICATION Danner, F.; Kau, H.-P.
ISROMAC 2012 IDENTIFICATION OF DAMPING AND STIFFNESS COEFFICIENTS OF A SHAPE MEMORY ALLOY WIRE MESH DAMPER Delgado, A.; Ertas, B.
ISROMAC 2012 THE USAGE OF STRONGLY SWIRLING FLOW FOR PRESSURE PIPE DESILTING IN A HYDROPOWER PLANT Doujak, E.; Edinger, G.
ISROMAC 2012 MODULAR CONCEPT FOR DECENTRALICED PUMP STORAGE SYSTEMS A SMALL HYDRO APPROACH Doujak, E.; Samonig, M.
ISROMAC 2012 HIGH SPEED OBSERVATION OF CAVITATION EROSION PIT FORMATION Dular, M.; Coutier-Delgosha, O.
ISROMAC 2012 SCALE EFFECTS ON UNSTEADY CLOUD CAVITATION Dular, M.; Khlifa, I.; Coutier-Delgosha, O.
ISROMAC 2012 AN INVESTIGATION OF THE STABILITY OF A WAVE BEARING SLEEVE SUPPORTED BY AN ELASTIC ELEMENT Ene, N. M.; Dimofte, F.
ISROMAC 2012 CHARACTERIZING ROTOR STATOR INTERACTION - RSI IN HYDROFOIL WAKE USING CFD AND EXPERIMENTALLY OBTAINED WAKE FLOW FIELDS Finstad, P. Henrik E.; Kjeldsen, M.; Arndt, R.
ISROMAC 2012 CAVITATION EROSION PREDICTION BY NUMERICAL SIMULATIONS Flageul, C.; Fortes Patella, R.; Archer, A.
ISROMAC 2012 A STUDY OF THE INTERNAL FLOW STRUCTURE IN A SIDE CHANNEL PUMP Fleder, A.; Böhle, M.
ISROMAC 2012 LOW NOx HYDROGEN COMBUSTION CHAMBER FOR INDUSTRIAL GAS TURBINE APPLICATIONS Funke, H.; Boerner, S.; Keinz, J.; Hendrick, P.; Recker, E.
ISROMAC 2012 LOCAL PARTICLE CONCENTRATION MEASUREMENTS IN A CENTRIFUGAL SLURRY PUMP USING A-SCAN ULTRASOUND TECHNIQUE Furlan, J. M.; Kadambi, J.; Visintainer, R. J.; Garman, M.
ISROMAC 2012 THE EFFECTS OF BLADE NUMBER AND CAVITIES ON CROSS-FLOW-FAN ACOUSTICS Gannon, A. J.; Hobson, G. V.
ISROMAC 2012 OPTIMIZATION OF RADIAL TURBOMACHINERY RUNNERS USING A GENETIC ALGORITHM Gantner, A.
ISROMAC 2012 MULTI MODAL OBSTRUCTION TO CONTROL TONAL FAN NOISE: THEORY AND EXPERIMENTS Gerard, A.; Berry, A.; Masson, P.; Moreau, S.
ISROMAC 2012 MODELLING AND INVESTIGATION OF THE INTERACTION BETWEEN DROPS AND BLADES IN COMPRESSOR CASCADES WITH A DROPLET LADEN INFLOW Gomaa, H.; Weigand, B.
ISROMAC 2012 ECKERT-WEISE ENERGY SEPARATION AND BASE DRAG IN THE WAKES OF TURBINE BLADES AND CIRCULAR CYLINDERS Gostelow, J. P.; Carscallen, W. E.; Kurosaka, M.
ISROMAC 2012 MEASUREMENT OF ROTOR RIM DEFORMATIONS DUE TO UNSYMMETRICAL AIR GAP Gustavsson, R.; Nässelqvist, M.; Berg, M.
ISROMAC 2012 INVESTIGATION OF LAMINAR FLOW SEPARATION AND TRANSITION IN COMPRESSOR/FAN BLADES WITH A LARGE EDDY SIMULATION Hah, C.
ISROMAC 2012 EXPERIMENTAL INVESTIGATION FOR MIXING DUCT LENGTH EFFECT ON SHORT EJECTOR PERFORMANCE Im, J. H.; Song, S. J.
ISROMAC 2012 PERFORMANCE ENHANCEMENT OF A CENTRIFUGAL FAN HAVING SPLITTERS Jang, C.-M.; Choi, K.-R.
ISROMAC 2012 ON THERMODYNAMIC MODELLING OF TWO-PHASE FLOW COMPRESSION WITH DISPERSED WATER DROPLETS IN AIR Joos, F.; Eisfeld, T.
ISROMAC 2012 AEROACOUSTIC NEAR-FIELD STUDY OF A DUCTED HELICOPTER TAIL ROTOR WITH DIFFERENT VANE COUNT BY USE OF PHASE-LAGGED BOUNDARIES Kainz, M.; Le Chuiton, F.; Kau, H.-P.
ISROMAC 2012 NUMERICAL INVESTIGATION OF AXIAL FORCE DYNAMICS ON BALANCE PISTON OF A ROCKET PUMP Kawasaki, S.; Kimura, T.; Uchiumi, M.; Shimura, T.; Hayashi, M.; Matsui, J.
ISROMAC 2012 EXPERIMENTAL ANALYSIS OF PUMP-CIRCUIT COUPLING AT BLADE-PASSING FREQUENCY Keller, J.; Parrondo, J.; Barrio, R.; Blanco, E.; Fernández, J.
ISROMAC 2012 AERODYNAMICS AND ACOUSTICS PREDICTIONS OF THE 2-BLADE NREL WIND TURBINE USING LATTICE-BOLTZMANN METHOD Kim, M.-S.; Pérot, F.; Meskine, M.
ISROMAC 2012 TRAILING EDGE BLOWING FOR REDUCTION OF ROTOR-STATOR INTERACTION NOISE: CRITERIA, DESIGN AND MEASUREMENTS Kohlhaas, M.; Carolus, T.
ISROMAC 2012 DESIGN OF A FAN-TEST-FACILITY WITH AXIAL FLOW AND CROSSWIND CAPABILITIES Krone, J.-H.; Friedrichs, J.
ISROMAC 2012 EFFECT OF RECYCLED ANODE GAS ON ADVANCED IGFC PERFORMANCE Kurata, O.; Nomura, R.; Kawabata, M.; Iki, N.; Tsutsumi, A.; Koda, E.; Furutani, H.
ISROMAC 2012 EXPERIMENTAL ANALYSIS OF AN EDDY CURRENT DAMPING DEVICE APPLIED TO A ROTATING INTEGRALLY BLADED DISC Laborenz, J.; Panning, L.; Wallaschek, J.; Denk, M.; Masserey, P.
ISROMAC 2012 STUDY OF THE FLOW TRANSITION PROCESS IN THE GAP OF TWO CONCENTRIC CYLINDERS Liu, D.; Yang, M.-G.; Kim, H.-B.; Wang, C.-L.
ISROMAC 2012 PASSIVE BOUNDARY LAYER CONTROL OF A THIN, LOW PRESSURE TURBINE BLADE BY PRESSURE TO SUCTION SIDE PRESSURE DIFFERENCE DRIVEN BLOWING Mack, M.; Ludewig, T.; Niehuis, R.
ISROMAC 2012 DYNAMIC ANALYSIS OF KAPLAN TURBINE CAUSED BY SHORT CIRCUIT GENERATOR MOMENT Malenovsky, E.
ISROMAC 2012 FLOW FIELD IN BLADE CASCADE WITH EFFECT OF THIN WATER FILM Matejka M., Syrovatka V.
ISROMAC 2012 FLOW SEPARATION CONTROL FOR LOW-PRESSURE TURBINE USING PLASMA ACTUATORS Matsunuma, T.; Segawa, T.
ISROMAC 2012 AN ANALYTICAL MODEL TO EVALUATE HEAT TRANSFER CHARACTERISTICS IN POROUS MEDIA BY A PERIODIC QUASI STEADY-STATE TECHNIQUE Mayer, B.
ISROMAC 2012 AEROACOUSTIC PREDICTIONS OF A LOW-SUBSONIC AXIAL FAN Moreau, S.; Sanjose, M.; Henner, M.
ISROMAC 2012 NUMERICAL STUDY ON TIP LEAKAGE VORTEX CONTROL BY JET INJECTION Nakamura, R.; Suzuki, M.; Yamamoto, M.
ISROMAC 2012 APPARENT AND REAL EFFICIENCY OF TURBOCHARGERS UNDER INFLUENCE OF HEAT FLOW Nakhjiri, M.; Pelz, P.; Matyschok, B.
ISROMAC 2012 DESIGN OF TEST RIG FOR ROTORDYNAMIC SIMULATIONS OF VERTICAL MACHINES Nässelqvist, M.; Gustavsson, R.; Aidanpää, J.-O.
ISROMAC 2012 EXPERIMENTAL INVESTIGATION ON DUCTED COUNTER-ROTATING AXIAL FLOW FANS Nouri, H.; Ravelet, F.; Bakir, F.; Sarraf, C.
ISROMAC 2012 EXPERIMENTAL STUDY OF ROTATING STALL FLOW IN VANELESS DIFFUSER OF A CENTRIFUGAL COMPRESSOR Ohuchida, S.
ISROMAC 2012 A TWO DIMENSIONAL MODEL FOR PUMP-TURBINE INSTABILITY INVESTIGATION Olimstad, G.; Børresen, B.; Nielsen, T.
ISROMAC 2012 GEOMETRY IMPACT ON PUMP-TURBINE CHARACTERISTICS Olimstad, G.; Børresen, B.; Nielsen, T.
ISROMAC 2012 A REDUCED ORDER MODEL FOR OPTIMAL CENTRIFUGAL PUMP DESIGN Pasini, A.; Valentini, D.; Pace, G.; Torre, L.; Cervone, A.; d'Agostino, L.
ISROMAC 2012 INFLUENCE OF HOLE DIAMETER AND FAN SHAPING ON ENDWALL FILM COOLING OF A ROTOR BLADE Perdichizzi, A.; Barigozzi, G.; Franchini, G.; Fontaneto, F.; Maritano, M.; Abram, R.
ISROMAC 2012 PERFORMANCE OF RAMJET ENGINES USING SUPERSONIC COMBUSTION Pires, M.
ISROMAC 2012 A NEW SLIDING INTERFACE METHOD FOR FLUID MACHINERY CALCULATION Pritz, B.; Werner, R.; Gabi, M.
ISROMAC 2012 MODEL SIMPLIFICATIONS FOR NUMERICAL SIMULATION OF INGESTION THROUGH GAS TURBINE RIM SEALS Rabs, M.; Benra, F.-K.; Dohmen, H.J.; Lock, G.D.; Schneider, O.
ISROMAC 2012 A COMBINATION OF CONVENTIONAL LAYOUT DESIGN AND NUMERICAL METHODS FOR THE OPTIMIZATION OF CENTRIFUGAL FANS Ratter, H.; Caglar, S.; Gabi, M.
ISROMAC 2012 EXPERIMENTAL AND NUMERICAL INVESTIGATION OF AN OPENED ROTOR-STATOR CAVITY SUBJECTED TO A FORCED RADIAL INFLOW Rinaldi, A.; Abdel Nour, F.; Debuchy, R.; Bois, G.; Pavesi, G.
ISROMAC 2012 ON SIMILARITY WHEN DEVELOPING CENTRIFUGAL PUMPS ON TEST RIGS OPERATED WITH AIR Roclawski, H.; Böhle, M.
ISROMAC 2012 ANALYTICAL MODELING OF THE TONAL NOISE FROM OPEN ROTORS DUE TO TIP VORTICES Roger, M.; Schram, C.
ISROMAC 2012 MODEL-BASED MONITORING OF ROTOR SYSTEMS - IDENTIFICATION OF UNDAMAGED ROTOR AND DIFFERENT FAILURES Rossner, M.; Heckmann, B.; Thuemmel, T.; Ulbrich, H.
ISROMAC 2012 MULTI-PHYSICS CFD SIMULATION OF COLD SPRAY PROCESS Sakamaki, R.; Izumi, Y.; Suzuki, M.; Yamamoto, M.; Ookita, Y.
ISROMAC 2012 UNSTEADY NUMERICAL SIMULATIONS OF A LOW-SPEED RADIAL FAN FOR AEROACOUSTICS PREDICTIONS Sanjose, M.; Moreau, S.
ISROMAC 2012 AN EXPERIMENTAL AEROACOUSTICS STUDY OF A LOW-SPEED PROPELLER FAN Sasaki, S.; Torise, I.; Tokushige, T.; Roger, M.
ISROMAC 2012 “GREEN PLANET ARCHITECTURE” A METHODOLOGY FOR SELF-SUSTAINABLE DISTRIBUTED RENEWABLE ENERGY ECOSYSTEMS Saxena, N. T.; Thomas, A. E.; Johnson, S.; Venners, J. P.; Hendricks, Robert C.
ISROMAC 2012 ALTERNATE-FUELED COMBUSTOR-SECTOR EMISSIONS Saxena, N.; Thomas, A.; Shouse, D. T.; Neuroth, C. T.; Hendricks, R. C.; Lynch, A.; Frayne, C. W.; Stutrud, J. S.; Corpan, E.; Hanks...
ISROMAC 2012 TEST RIG DESIGN FOR INVESTIGATIONS OF WATER DROPLET EVAPORATION AT HIGH PRESSURE AND TEMPERATURE LEVELS Schnitzler, J. P.; Feng, J.; Benra, F.-K.; Dohmen, H. J.; Werner, K.
ISROMAC 2012 ADVANCES IN ENDWALL CONTOURING USING CONTINUOUS DIFFUSION METHOD AND ITS APPLICATION TO A THREE-STAGE HIGH PRESSURE TURBINE Schobeiri, M. T.
ISROMAC 2012 NUMERICAL ANALYSIS OF AERODYNIMIC EXCITATION OF BLADE VIBRATIONS DUE TO NOZZLE GUIDE VANES IN RADIAL INFLOW TURBINES Schwitzke, M.; Schulz, A.; Bauer, H.-J.
ISROMAC 2012 NUMERICAL SIMULATION OF HYDROACOUSTICS IN TURBOMACHINERY BASED ON LINEARIZED EULER EQUATIONS Seidl S. A. F., Schilling R.
ISROMAC 2012 DYNAMIC RESPONSE OF AN AXIAL THRUST BALANCING SYSTEM FOR ROCKET PUMPS Shimura, T.; Kawasaki, S.; Uchiumi, M.; Kimura, T.; Hayashi, M.; Matsui, J.
ISROMAC 2012 TRANSIENT STEREO PIV MEASUREMENTS ON THE FLOW FIELD OF AN UNSHROUDED IMPELLER Sieber, S.; Mattern, P.; Fröhlig, F.; Caglar, S.; Gabi, M.
ISROMAC 2012 AUTOMATIC SHAPE OPTIMIZATION OF DIFFUSERS FOR UNGUIDED WELLS TURBINES Simader, J.; Ruprecht, A.; Riedelbauch, S.; Tease, K.; Arlitt, R.
ISROMAC 2012 AERO-ACOUSTIC PERFORMANCE PREDICTION OF WELLS TURBINES Starzmann, R.; Carolus, T.; Tease, K.; Arlitt, R.
ISROMAC 2012 ELASTO-DYNAMIC CONTROL AND LOAD ALLEVIATION IN COMPONENTS EXCITED BY UNSTEADY AIR FLOW Stroscher, F.; Baier, H.; Maucher, C.
ISROMAC 2012 BLADE SEGMENTATION STRATEGY FOR TONAL NOISE COMPUTATION OF LOW MACH AXIAL FANS Tannoury, E.; Demory, B.; Henner, M.; Khelladi, S.; Bakir, F.
ISROMAC 2012 EFFICIENT CSM/CFD METHOD FOR AEROELASTICITY STABILITY ANALYS OF TURBOMACHNE BLADES Temis, J.; Salles, L.
ISROMAC 2012 NUMERICAL SIMULATION OF SHEET AND CLOUD CAVITATION AND DETECTION OF CAVITATION EROSION Thalhamer, M.; Schmidt, S. J.; Mihatsch, M.; Adams, N. A.
ISROMAC 2012 MEASUREMENTS AT HIGH SPEED SIDE CHANNEL BLOWER Thamsen, P. U.; Höchel, K.
ISROMAC 2012 IMPACT OF SAND EROSION IN SUBMERSIBLE PUMPS Thamsen, P. U.; Wulff, S.
ISROMAC 2012 ALTERNATE-FUELED COMBUSTOR-SECTOR PERFORMANCE Thomas, A.; Saxena, N.; Neuroth, C.; Frayne, Charles W.; Lynch, A.; Corporan, E.; Hanks, Capt. T.; Stuturd, J. S.; Shouse, D. T.; Hendricks...
ISROMAC 2012 DYNAMICS OF A HYDRODYNAMIC SUPPORTED SCREW PUMP ROTOR Thurner, J.; Pelz, P.; Holz, F.
ISROMAC 2012 THERMAL-FLUID TRANSPORT PHENOMENA IN AN AXIALLY ROTATING FLOW PASSAGE WITH TWIN CONCENTRIC ORIFICES WITH DIFFERENT RADII Torrii, S.
ISROMAC 2012 INFLUENCE OF THE NETWORK GEOMETRY ON THE SURGE CHARACTERISTICS OF A CENTRIFUGAL COMPRESSOR Toussaint, M.; El Kamel, C.
ISROMAC 2012 EXPERIMENTAL INVESTIGATION OF ROTORDYAMIC FORCES ON WHIRLING OPEN/CLOSED CENTRIFUGAL IMPELLERS Uchiumi, M.; Nagao, N.; Yoshida, Y.; Eguchi, M.
ISROMAC 2012 HYBRID PDF/RANS SIMULATION OF A DRY LOW EMISSION COMBUSTOR USING DETAILED CHEMISTRY Ulmer, S.; Joos, F.
ISROMAC 2012 EXPERIMENTAL AND ANALYTICAL STUDY OF TONAL SOURCE ATTENUATION IN WAKE-STATOR INTERACTION WITH POROUS MATERIAL Vergara T., C.; Bilka, M.; Schram, C.
ISROMAC 2012 NONLINEAR INTERACTIONS IN SYSTEMS OF MULTI-ORDER TORSIONAL VIBRATION ABSORBERS Vidmar, B.; Shaw, S.; Feeny, B.
ISROMAC 2012 VALIDATION OF A WEIBULL-JOHNSON VIRTUAL BIN MONTE CARLO METHOD FOR FATIGUE LIFE DETERMINATION OF ROTATING SHAFTS Vlcek, B. L.; Hendricks, R. C.; Zaretsky, E. V.
ISROMAC 2012 NUMERICAL SIMULATION OF DEPOSITION PHENOMENA ON TURBINE VANE OF JET ENGINE Wakikuromaru, T.; Suzuki, M.; Yamamoto, M.; Ookita, Y.
ISROMAC 2012 INVESTIGATION OF A 1D-MODEL FOR SIMULATING THE CHARACTERISTICS OF A HIGH HEAD FRANCIS TURBINE Walseth, E. C.; Nielsen, T. K.; Svingen, B.
ISROMAC 2012 CIRCULATION DISTRIBUTION OF HIGH SPECIFIC SPEED MIXED-FLOW PUMP Wang, C. L.; Liu, D.
ISROMAC 2012 ADDITIONAL MASS EFFECTS DUE TO THE FLUID AT THE NATURAL FREQUENCIES OF A CENTRIFUGAL PUMP IMPELLER DURING UNDERWATER OPERATION Watanabe, Y.
ISROMAC 2012 INFLUENCE OF SOLIDITY AND CAMBER ON AEROACOUSTIC NOISE RADIATION INDUCED BY CASCADE Yang, A.; Chen, E.; Yang, F.; Yang, Y.; Dai, R.
ISROMAC 2012 AEROACOUSTICAL INVESTIGATIONS ON AXIAL FANS FOR AUTOMOTIVE COOLING SYSTEMS Zayani, M.; Caglar, S.; Gabi, M.
ISROMAC 2012 INSTABILITY ANALYSIS OF DRAFT TUBE SWIRLING FLOW BY 3D TURBULENT UNSTEADY FLOW Zhang, M.; Liu, S.; Wu, Y.
ISROMAC 2012 FIBER ORIENTATION AND RHEOLOGY BEHAVIOR OF LAMINAR SUSPENSION FLOWING THROUGH A 2D CURVED EXPANSION DUCT Zhang, Q.
ISROMAC 2012 NUMERICAL SIMULATION OF FLOW FIELD GENERATED BY VIBRATING SURFACES IN THE APPLICATION OF HIFU-INDUCED CAVITATION Zou, Z.